January 20, 20188 yr Hi guys, was trying to upgrade my system : Case: Lian Li PC d-8000 M/B: Supermicro - X9SCM-IIF CPU: Intel Xeon E3-1230 V2 @ 3.30Ghz Supermicro SASLP-MV8 REV: 1.00 controller BIOS ver: 4.0.0.1800 With two extra cards AOC - SASLP-MV8 REV:1.01 I though they were Plug n Play so I simply installed in the PCI-E but firstly the did not worked and, after a reboot, even the original one (that always worked fine) is now giving me problems (is not working anymore)... Any idea?? Thnx
January 20, 20188 yr Community Expert Disable INT13 on the controllers, also if you ever changed any bios settings best to load defaults.
January 20, 20188 yr I seem to remember there was issues running two of these cards at the same time for some. You'll have to use the search function to find more info. Johnnie beat me to it. Edited January 20, 20188 yr by saarg
January 20, 20188 yr Author 20 minutes ago, saarg said: I seem to remember there was issues running two of these cards at the same time for some. You'll have to use the search function to find more info. Johnnie beat me to it. Thnx I will
January 20, 20188 yr Author 21 minutes ago, johnnie.black said: Disable INT13 on the controllers, also if you ever changed any bios settings best to load defaults. Thank You
January 20, 20188 yr Author I am reading around about a lot of issues related to this cards... I am ready to change them (actually I had several problems in the past) if I have an alternate solution. Any advice?
January 20, 20188 yr Community Expert 33 minutes ago, gideva said: I am reading around about a lot of issues related to this cards... Yes there are, both the SASLP and SAS2LP are not recommended for v6+. You can get any LSI with a SAS2008/2308/3008 chipset in IT mode, e.g., 9201-8i, 9211-8i, 9207-8i, 9300-8i, etc and clones.
January 20, 20188 yr Author Let me take advantage of your knowledge... They are Pnp? Just mount them and off we go? Any compatibility issue with Supermicro M/B?
January 20, 20188 yr Community Expert 18 minutes ago, gideva said: They are Pnp? 9211-8i might need a flash to IT mode, but it's easy, like a bios update, the others I mentioned are all IT mode only and plug'n play. 18 minutes ago, gideva said: Any compatibility issue with Supermicro M/B? Not that I know of, I use several myself on the X9SCM-F, X9SCM-iiF, X9SCL-F and X11SSM-F
Archived
This topic is now archived and is closed to further replies.