Skip to content
View in the app

A better way to browse. Learn more.

Unraid

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Preclear results

Featured Replies

Hi All,

 

Just wondering if there anything I should be worried about in my preclear results below? There are 2 drive sda and sdb. Wonder why I got a details report for the seagate, compared to the WD?

 

Thanks

 

Drive 1

[H[2J===========================================================================

=                [4munRAID server Pre-Clear disk /dev/sdb[24m

=                      cycle [7m1[27m of 1

= Disk Pre-Clear-Read completed                                [7mDONE[27m

= Step 1 of 10 - Copying zeros to first 2048k bytes            [7mDONE[27m

= Step 2 of 10 - Copying zeros to remainder of disk to clear it [7mDONE[27m

= Step 3 of 10 - Disk is now cleared from MBR onward.          [7mDONE[27m

= Step 4 of 10 - Clearing MBR bytes for partition 2,3 & 4      [7mDONE[27m

= Step 5 of 10 - Clearing MBR code area                        [7mDONE[27m

= Step 6 of 10 - Setting MBR signature bytes                    [7mDONE[27m

= Step 7 of 10 - Setting partition 1 to precleared state        [7mDONE[27m

= Step 8 of 10 - Notifying kernel we changed the partitioning  [7mDONE[27m

= Step 9 of 10 - Creating the /dev/disk/by* entries            [7mDONE[27m

= Step 10 of 10 - Testing if the clear has been successful.    [7mDONE[27m

= Disk Post-Clear-Read completed                                [7mDONE[27m

Disk Temperature: 28C, Elapsed Time:  27:06:42

============================================================================

==

== [7mDisk /dev/sdb has been successfully precleared[27m

==

============================================================================

[7m S.M.A.R.T. error count differences detected after pre-clear

note, some 'raw' values may change, but not be an indication of a problem[27m

63c63

< 193 Load_Cycle_Count        0x0032  200  200  000    Old_age  Always      -      263

---

> 193 Load_Cycle_Count        0x0032  200  200  000    Old_age  Always      -      264

========================

 

Drive 2

 

[H[2J===========================================================================

=                [4munRAID server Pre-Clear disk /dev/sda[24m

=                      cycle [7m1[27m of 1

= Disk Pre-Clear-Read completed                                [7mDONE[27m

= Step 1 of 10 - Copying zeros to first 2048k bytes            [7mDONE[27m

= Step 2 of 10 - Copying zeros to remainder of disk to clear it [7mDONE[27m

= Step 3 of 10 - Disk is now cleared from MBR onward.          [7mDONE[27m

= Step 4 of 10 - Clearing MBR bytes for partition 2,3 & 4      [7mDONE[27m

= Step 5 of 10 - Clearing MBR code area                        [7mDONE[27m

= Step 6 of 10 - Setting MBR signature bytes                    [7mDONE[27m

= Step 7 of 10 - Setting partition 1 to precleared state        [7mDONE[27m

= Step 8 of 10 - Notifying kernel we changed the partitioning  [7mDONE[27m

= Step 9 of 10 - Creating the /dev/disk/by* entries            [7mDONE[27m

= Step 10 of 10 - Testing if the clear has been successful.    [7mDONE[27m

= Disk Post-Clear-Read completed                                [7mDONE[27m

Disk Temperature: 31C, Elapsed Time:  29:11:06

============================================================================

==

== [7mDisk /dev/sda has been successfully precleared[27m

==

============================================================================

[7m S.M.A.R.T. error count differences detected after pre-clear

note, some 'raw' values may change, but not be an indication of a problem[27m

54c54

<  1 Raw_Read_Error_Rate    0x000f  105  099  006    Pre-fail  Always      -      7344427

---

>  1 Raw_Read_Error_Rate    0x000f  119  099  006    Pre-fail  Always      -      211789614

58c58

<  7 Seek_Error_Rate        0x000f  100  253  030    Pre-fail  Always      -      4294986081

---

>  7 Seek_Error_Rate        0x000f  100  253  030    Pre-fail  Always      -      4295169737

65,67c65,67

< 189 High_Fly_Writes        0x003a  100  100  000    Old_age  Always      -      0

< 190 Airflow_Temperature_Cel 0x0022  074  068  045    Old_age  Always      -      26 (Lifetime Min/Max 17/32)

< 195 Hardware_ECC_Recovered  0x001a  045  037  000    Old_age  Always     

---

> 189 High_Fly_Writes        0x003a  099  099  000    Old_age  Always      -      1

> 190 Airflow_Temperature_Cel 0x0022  069  066  045    Old_age  Always      -      31 (Lifetime Min/Max 17/34)

> 195 Hardware_ECC_Recovered  0x001a  052  037  000    Old_age  Always     

71,73c71,73

< 240 Head_Flying_Hours      0x0000  100  253  000    Old_age  Offline      -      184078003339320

< 241 Unknown_Attribute      0x0000  100  253  000    Old_age  Offline      -      832371

< 242 Unknown_Attribute      0x0000  100  253  000    Old_age  Offline      -      3812287584

---

> 240 Head_Flying_Hours      0x0000  100  253  000    Old_age  Offline      -      56191057133653

> 241 Unknown_Attribute      0x0000  100  253  000    Old_age  Offline      -      3907114543

> 242 Unknown_Attribute      0x0000  100  253  000    Old_age  Offline      -      2832639877

============================================================================

root@Tower:/boot#

Archived

This topic is now archived and is closed to further replies.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.