damato300x7 Posted January 27, 2018 Share Posted January 27, 2018 So last week I got 2 drives that failed. 1 Parity and Disk 1. I had this controller card in my system: SuperMicro AOC-SASLP-MV8. I know this card is not supported and figured that the system was not liking the card anymore. So I bought this card: LSI SAS 9207-8i. I installed it and started the system up and the 2 disks are still showing bad. Both of these drives are on the same and only backplane in my case so I thought maybe the backplane was bad so I removed the backplane from my case, started it back up and still disks are bad. I can't see anything in the diagnostics for a reason these drives are bad but I will attach a copy of the diagnostics and maybe someone can see something wrong. I am running a parity check right now, I don't know if this will possibly put the drives back to good if everything checks out on the parity check. dms-diagnostics-20180127-0706.zip Quote Link to comment
JorgeB Posted January 27, 2018 Share Posted January 27, 2018 13 minutes ago, damato300x7 said: I installed it and started the system up and the 2 disks are still showing bad. That's expected, you need to rebuild disk1 and resync parity, you can do both at the same time: https://lime-technology.com/wiki/Troubleshooting#Re-enable_the_drive Quote Link to comment
damato300x7 Posted January 27, 2018 Author Share Posted January 27, 2018 ok, Rebuild is in progress. Thanks for your help. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.