flybynite Posted January 30, 2018 Share Posted January 30, 2018 i ran Fix Common Problems and got this error, Your server has run out of memory, and processes (potentially required) are being killed off. tower-diagnostics-20180129-1931.zip I have attached my diagnostic Quote Link to comment
trurl Posted January 30, 2018 Share Posted January 30, 2018 Do you only have 2GB RAM? That is going to be a little tight for anything but basic NAS functionality. Quote Link to comment
flybynite Posted January 30, 2018 Author Share Posted January 30, 2018 Yes I believe its 2GB, I was ruining version 5 and just upgraded to 6.4 version about 2 weeks. What is recommend for the ram size? Quote Link to comment
trurl Posted January 30, 2018 Share Posted January 30, 2018 Depends on what you want to do with the server. I would go for at least 8 if the motherboard will allow it. Quote Link to comment
flybynite Posted January 30, 2018 Author Share Posted January 30, 2018 (edited) I'm using the server primarily for Plex and Plex's channel. I just wasnt sure if the 2gb is enough for that. Is there anything out of the ordinary or suspicious in the log that is causing the low memory issue or is it simply that I don't have enough RAM? Edited January 30, 2018 by flybynite Quote Link to comment
trurl Posted January 30, 2018 Share Posted January 30, 2018 I would say that if you are running any applications at all then 2GB isn't enough. Quote Link to comment
tdallen Posted January 30, 2018 Share Posted January 30, 2018 1 hour ago, flybynite said: I'm using the server primarily for Plex and Plex's channel. If that's all you're doing then 4GB might be enough, but I agree with trurl that 8GB is what you want and 2GB is not enough. Quote Link to comment
flybynite Posted January 30, 2018 Author Share Posted January 30, 2018 Thank you trurl and tdallen I will update the ram to 8GB and give it a shot. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.