alturismo Posted November 19, 2021 Share Posted November 19, 2021 2 hours ago, HubertusPrime said: i guess it is just a command line. but did not find anything about it. filebot has a nice homepage with all kinda infos and a nice active forum too 1 Quote Link to comment
ikkuranus Posted November 23, 2021 Share Posted November 23, 2021 (edited) I recently started consolidating media that was in my watchfolder from all of my smaller drives to one large. I did that so I could replace them with bigger drives. I have updated the unraid share (which my watchfolder is pointed at) to only include the new drives where they are stored but now filebot is processing many items that have already been processed. I should note that I do have an excludes file setup and it does get updated after running. Any idea why it's starting to process old stuff a 2nd time? Edited November 23, 2021 by ikkuranus Quote Link to comment
Nicon4454 Posted November 25, 2021 Share Posted November 25, 2021 I upgraded unraid to 6.10.0-rc2 an i got this error trying to rename a file. MOVE: Access Denied: /storage/Plex/Holding-for-renaming/The.Good.Doctor.S05E07.1080p.WEB.H264.mkv -> /storage/Plex/Holding-for-renaming/The Good Doctor - S05E07 - Expired [328634][1080p].mkv when i went back to 6.9.2 i was able to rename files again. how can i fix this? Quote Link to comment
david279 Posted November 25, 2021 Share Posted November 25, 2021 Change the puid and pgid in the docker template to 0 and see if it works. Quote Link to comment
Djoss Posted November 25, 2021 Author Share Posted November 25, 2021 Did you check if ownership/permissions of folders/files remained the same? You may also report/ask about this issue to the unRAID pre-release thread. Quote Link to comment
Djoss Posted November 25, 2021 Author Share Posted November 25, 2021 On 11/23/2021 at 2:12 AM, ikkuranus said: I recently started consolidating media that was in my watchfolder from all of my smaller drives to one large. I did that so I could replace them with bigger drives. I have updated the unraid share (which my watchfolder is pointed at) to only include the new drives where they are stored but now filebot is processing many items that have already been processed. I should note that I do have an excludes file setup and it does get updated after running. Any idea why it's starting to process old stuff a 2nd time? The AMC script invoked by the container uses /mnt/user/appdata/FileBot/amc-exlude-list.txt. Do you see your already-processed files in it ? Quote Link to comment
Nicon4454 Posted November 26, 2021 Share Posted November 26, 2021 11 hours ago, david279 said: Change the puid and pgid in the docker template to 0 and see if it works. This worked thank you. Quote Link to comment
dellorianes Posted December 17, 2021 Share Posted December 17, 2021 (edited) Hi, I am trying to setup Filebot by first time, with AMC, but at the start of the program it gives me the following errors: (process:963): dconf-CRITICAL **: 10:46:51.288: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:963): dconf-CRITICAL **: 10:46:51.289: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:963): dconf-CRITICAL **: 10:46:51.289: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:963): dconf-CRITICAL **: 10:46:51.289: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:963): dconf-CRITICAL **: 10:46:51.289: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:963): dconf-CRITICAL **: 10:46:51.289: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:963): dconf-CRITICAL **: 10:46:51.289: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:963): dconf-CRITICAL **: 10:46:51.289: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:963): dconf-CRITICAL **: 10:46:51.290: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:963): dconf-CRITICAL **: 10:46:51.290: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. Done ヾ(@⌒ー⌒@)ノ Someone knows the reason? I watch this reply in page 17 about the same error but, after new clean install (remove docker, remove historic container and remove appdata folder) i can not fix it. Thank you in advance Edit: As said in previous posts, changing ID and group to 0 (root) fixed the error. Are there any problem, from my ignorance, for staying root permits? Edited December 17, 2021 by dellorianes Quote Link to comment
Djoss Posted December 17, 2021 Author Share Posted December 17, 2021 3 hours ago, dellorianes said: Hi, I am trying to setup Filebot by first time, with AMC, but at the start of the program it gives me the following errors: (process:963): dconf-CRITICAL **: 10:46:51.288: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:963): dconf-CRITICAL **: 10:46:51.289: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:963): dconf-CRITICAL **: 10:46:51.289: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:963): dconf-CRITICAL **: 10:46:51.289: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:963): dconf-CRITICAL **: 10:46:51.289: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:963): dconf-CRITICAL **: 10:46:51.289: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:963): dconf-CRITICAL **: 10:46:51.289: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:963): dconf-CRITICAL **: 10:46:51.289: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:963): dconf-CRITICAL **: 10:46:51.290: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:963): dconf-CRITICAL **: 10:46:51.290: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. Done ヾ(@⌒ー⌒@)ノ Someone knows the reason? I watch this reply in page 17 about the same error but, after new clean install (remove docker, remove historic container and remove appdata folder) i can not fix it. Thank you in advance Edit: As said in previous posts, changing ID and group to 0 (root) fixed the error. Are there any problem, from my ignorance, for staying root permits? Running as root is not a good practice. There is no need to give too much privileges to the container. When exactly are you seeing these messages? Are they preventing FileBot to run? Can you provide the full container log ? Quote Link to comment
PlanetDyna Posted December 18, 2021 Share Posted December 18, 2021 Hey Folks. Quick question: When running Filebot I got: "Skipping AMC script invocation: input folder not stable". You know how to fix? Best regards Quote Link to comment
alturismo Posted December 18, 2021 Share Posted December 18, 2021 2 hours ago, PlanetDyna said: You know how to fix? like the message says, keep the input folder stable as you also dont want filebot to move, rename "running" files ... Quote Link to comment
PlanetDyna Posted December 19, 2021 Share Posted December 19, 2021 Sorry - can you explain in other words what "stbale" means? Quote Link to comment
alturismo Posted December 19, 2021 Share Posted December 19, 2021 7 hours ago, PlanetDyna said: Sorry - can you explain in other words what "stbale" means? no activity in the watch folder ... when all files there are downloaded, unpacked, recorded, whatever ... then filebot will start todo its job Quote Link to comment
dellorianes Posted December 25, 2021 Share Posted December 25, 2021 (edited) On 12/17/2021 at 2:54 PM, Djoss said: Running as root is not a good practice. There is no need to give too much privileges to the container. When exactly are you seeing these messages? Are they preventing FileBot to run? Can you provide the full container log ? Thank you for your replay. Find below the full container log: [s6-init] making user provided files available at /var/run/s6/etc...exited 0. [s6-init] ensuring user provided files have correct perms...exited 0. [fix-attrs.d] applying ownership & permissions fixes... [fix-attrs.d] done. [cont-init.d] executing container initialization scripts... [cont-init.d] 00-app-niceness.sh: executing... [cont-init.d] 00-app-niceness.sh: exited 0. [cont-init.d] 00-app-script.sh: executing... [cont-init.d] 00-app-script.sh: exited 0. [cont-init.d] 00-app-user-map.sh: executing... [cont-init.d] 00-app-user-map.sh: exited 0. [cont-init.d] 00-clean-logmonitor-states.sh: executing... [cont-init.d] 00-clean-logmonitor-states.sh: exited 0. [cont-init.d] 00-clean-tmp-dir.sh: executing... [cont-init.d] 00-clean-tmp-dir.sh: exited 0. [cont-init.d] 00-set-app-deps.sh: executing... [cont-init.d] 00-set-app-deps.sh: exited 0. [cont-init.d] 00-set-home.sh: executing... [cont-init.d] 00-set-home.sh: exited 0. [cont-init.d] 00-take-config-ownership.sh: executing... [cont-init.d] 00-take-config-ownership.sh: exited 0. [cont-init.d] 00-xdg-runtime-dir.sh: executing... [cont-init.d] 00-xdg-runtime-dir.sh: exited 0. [cont-init.d] 10-certs.sh: executing... [cont-init.d] 10-certs.sh: exited 0. [cont-init.d] 10-cjk-font.sh: executing... [cont-init.d] 10-cjk-font.sh: exited 0. [cont-init.d] 10-nginx.sh: executing... [cont-init.d] 10-nginx.sh: exited 0. [cont-init.d] 10-vnc-password.sh: executing... [cont-init.d] 10-vnc-password.sh: exited 0. [cont-init.d] 10-web-index.sh: executing... [cont-init.d] 10-web-index.sh: exited 0. [cont-init.d] filebot.sh: executing... Enter OpenSubtitles username: Enter OpenSubtitles password: Testing OpenSubtitles... OK Done ヾ(@⌒ー⌒@)ノ [cont-init.d] filebot.sh: exited 0. [cont-init.d] done. [services.d] starting services [services.d] starting s6-fdholderd... [services.d] starting certsmonitor... [services.d] starting nginx... [services.d] starting xvfb... [nginx] starting... [certsmonitor] disabling service: secure connection not enabled. [xvfb] starting... [services.d] starting amc... [services.d] starting logmonitor... [services.d] starting statusmonitor... [logmonitor] no file to monitor: disabling service... [services.d] starting openbox... [statusmonitor] no file to monitor: disabling service... [openbox] starting... [amc] Changes detected in input folder. [amc] Waiting 10 seconds before proceeding... [services.d] starting x11vnc... [services.d] starting app... [x11vnc] starting... [app] starting FileBot... [services.d] done. 25/12/2021 02:07:21 passing arg to libvncserver: -rfbport 25/12/2021 02:07:21 passing arg to libvncserver: 5900 25/12/2021 02:07:21 passing arg to libvncserver: -rfbportv6 25/12/2021 02:07:21 passing arg to libvncserver: -1 25/12/2021 02:07:21 passing arg to libvncserver: -httpportv6 25/12/2021 02:07:21 passing arg to libvncserver: -1 25/12/2021 02:07:21 passing arg to libvncserver: -desktop 25/12/2021 02:07:21 passing arg to libvncserver: FileBot 25/12/2021 02:07:21 x11vnc version: 0.9.14 lastmod: 2015-11-14 pid: 963 25/12/2021 02:07:21 Using X display :0 25/12/2021 02:07:21 rootwin: 0x43 reswin: 0x400001 dpy: 0xe16f29e0 25/12/2021 02:07:21 25/12/2021 02:07:21 ------------------ USEFUL INFORMATION ------------------ 25/12/2021 02:07:21 X DAMAGE available on display, using it for polling hints. 25/12/2021 02:07:21 To disable this behavior use: '-noxdamage' 25/12/2021 02:07:21 25/12/2021 02:07:21 Most compositing window managers like 'compiz' or 'beryl' 25/12/2021 02:07:21 cause X DAMAGE to fail, and so you may not see any screen 25/12/2021 02:07:21 updates via VNC. Either disable 'compiz' (recommended) or 25/12/2021 02:07:21 supply the x11vnc '-noxdamage' command line option. 25/12/2021 02:07:21 X COMPOSITE available on display, using it for window polling. 25/12/2021 02:07:21 To disable this behavior use: '-noxcomposite' 25/12/2021 02:07:21 25/12/2021 02:07:21 Wireframing: -wireframe mode is in effect for window moves. 25/12/2021 02:07:21 If this yields undesired behavior (poor response, painting 25/12/2021 02:07:21 errors, etc) it may be disabled: 25/12/2021 02:07:21 - use '-nowf' to disable wireframing completely. 25/12/2021 02:07:21 - use '-nowcr' to disable the Copy Rectangle after the 25/12/2021 02:07:21 moved window is released in the new position. 25/12/2021 02:07:21 Also see the -help entry for tuning parameters. 25/12/2021 02:07:21 You can press 3 Alt_L's (Left "Alt" key) in a row to 25/12/2021 02:07:21 repaint the screen, also see the -fixscreen option for 25/12/2021 02:07:21 periodic repaints. 25/12/2021 02:07:21 GrabServer control via XTEST. 25/12/2021 02:07:21 25/12/2021 02:07:21 Scroll Detection: -scrollcopyrect mode is in effect to 25/12/2021 02:07:21 use RECORD extension to try to detect scrolling windows 25/12/2021 02:07:21 (induced by either user keystroke or mouse input). 25/12/2021 02:07:21 If this yields undesired behavior (poor response, painting 25/12/2021 02:07:21 errors, etc) it may be disabled via: '-noscr' 25/12/2021 02:07:21 Also see the -help entry for tuning parameters. 25/12/2021 02:07:21 You can press 3 Alt_L's (Left "Alt" key) in a row to 25/12/2021 02:07:21 repaint the screen, also see the -fixscreen option for 25/12/2021 02:07:21 periodic repaints. 25/12/2021 02:07:21 25/12/2021 02:07:21 XKEYBOARD: number of keysyms per keycode 7 is greater 25/12/2021 02:07:21 than 4 and 51 keysyms are mapped above 4. 25/12/2021 02:07:21 Automatically switching to -xkb mode. 25/12/2021 02:07:21 If this makes the key mapping worse you can 25/12/2021 02:07:21 disable it with the "-noxkb" option. 25/12/2021 02:07:21 Also, remember "-remap DEAD" for accenting characters. 25/12/2021 02:07:21 25/12/2021 02:07:21 X FBPM extension not supported. Xlib: extension "DPMS" missing on display ":0". 25/12/2021 02:07:21 X display is not capable of DPMS. 25/12/2021 02:07:21 -------------------------------------------------------- 25/12/2021 02:07:21 25/12/2021 02:07:21 Default visual ID: 0x21 25/12/2021 02:07:21 Read initial data from X display into framebuffer. 25/12/2021 02:07:21 initialize_screen: fb_depth/fb_bpp/fb_Bpl 24/32/7680 25/12/2021 02:07:21 25/12/2021 02:07:21 X display :0 is 32bpp depth=24 true color 25/12/2021 02:07:21 25/12/2021 02:07:21 Listening for VNC connections on TCP port 5900 25/12/2021 02:07:21 25/12/2021 02:07:21 Xinerama is present and active (e.g. multi-head). 25/12/2021 02:07:21 Xinerama: number of sub-screens: 1 25/12/2021 02:07:21 Xinerama: no blackouts needed (only one sub-screen) 25/12/2021 02:07:21 25/12/2021 02:07:21 fb read rate: 2300 MB/sec 25/12/2021 02:07:21 fast read: reset -wait ms to: 10 25/12/2021 02:07:21 fast read: reset -defer ms to: 10 25/12/2021 02:07:21 The X server says there are 10 mouse buttons. 25/12/2021 02:07:21 screen setup finished. 25/12/2021 02:07:21 The VNC desktop is: 4776ad38f83d:0 0 ****************************************************************************** Have you tried the x11vnc '-ncache' VNC client-side pixel caching feature yet? The scheme stores pixel data offscreen on the VNC viewer side for faster retrieval. It should work with any VNC viewer. Try it by running: x11vnc -ncache 10 ... One can also add -ncache_cr for smooth 'copyrect' window motion. More info: http://www.karlrunge.com/x11vnc/faq.html#faq-client-caching FileBot 4.9.4 (r8736) JDK8 JNA Native: 5.2.2 MediaInfo: 21.03 Tools: fpcalc/1.4.3 p7zip/16.02 unrar/5.61 Extended Attributes: OK Unicode Filesystem: OK Script Bundle: 2021-08-02 (r761) Groovy: 3.0.8 JRE: OpenJDK Runtime Environment 1.8.0_275 JVM: 64-bit OpenJDK 64-Bit Server VM CPU/MEM: 8 Core / 14 GB Max Memory / 60 MB Used Memory OS: Linux (amd64) HW: Linux 4776ad38f83d 5.10.28-Unraid #1 SMP Wed Apr 7 08:23:18 PDT 2021 x86_64 GNU/Linux CPU/MEM: Intel(R) Core(TM) i7-9700 CPU @ 3.00GHz [MemTotal: 67 GB | MemFree: 2.5 GB | MemAvailable: 51 GB] STORAGE: btrfs [/] @ 91 GB | fuse.shfs [/storage] @ 13 TB | fuse.shfs [/watch] @ 220 GB | fuse.shfs [/output] @ 13 TB | fuse.shfs [/config] @ 220 GB p DATA: /config Package: DOCKER License: FileBot License PX31705185 (Valid-Until: 2071-12-15) (process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. Done ヾ(@⌒ー⌒@)ノ (process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. Done ヾ(@⌒ー⌒@)ノ [amc] Invoking AMC script... [amc] ,: No Such File: /run/s6/services/amc/, [amc] Run script [fn:amc] at [Sat Dec 25 02:07:30 CET 2021] [amc] Parameter: artwork = y [amc] Parameter: music = y [amc] Parameter: clean = y [amc] Parameter: excludeList = /config/amc-exlude-list.txt [amc] Parameter: movieFormat = /output/Peliculas/{ny}/{ny} - {vf} - {vc} - {vcf} - {hdr} - {aco} [amc] Parameter: musicFormat = {plex} [amc] Parameter: seriesFormat = /output/Series/{n}/{'Season '+s}/{n} - {s00e00} - {t} - {vf} - {vc} - {vcf} - {hdr} - {aco} [amc] Parameter: animeFormat = /output/Peliculas/{ny}/{ny} - {vf} - {vc} - {vcf} - {hdr} - {aco} [amc] Parameter: subtitles = es [amc] Parameter: skipExtract = n [amc] Argument[0]: /watch [amc] Run script [fn:amc] at [Sat Dec 25 02:07:30 CET 2021] [amc] Parameter: artwork = y [amc] Parameter: music = y [amc] Parameter: clean = y [amc] Parameter: excludeList = /config/amc-exlude-list.txt [amc] Parameter: movieFormat = /output/Peliculas/{ny}/{ny} - {vf} - {vc} - {vcf} - {hdr} - {aco} [amc] Parameter: musicFormat = {plex} [amc] Parameter: seriesFormat = /output/Series/{n}/{'Season '+s}/{n} - {s00e00} - {t} - {vf} - {vc} - {vcf} - {hdr} - {aco} [amc] Parameter: animeFormat = /output/Peliculas/{ny}/{ny} - {vf} - {vc} - {vcf} - {hdr} - {aco} [amc] Parameter: subtitles = es [amc] Parameter: skipExtract = n [amc] Argument[0]: /watch [amc] Use excludes: /config/amc-exlude-list.txt (35) [amc] No files selected for processing [amc] Done ¯_(ツ)_/¯ Theese errors appear once container is starting. Container starts witout problem, but I need to restart the container to amc scripts work. I am also using the amc JDonloader 2 scripts. Thank you in advance Edited December 29, 2021 by dellorianes Quote Link to comment
mason1171 Posted December 31, 2021 Share Posted December 31, 2021 (edited) Can I get some help with streamlining my config for proper AMC moving not copying then deleting please? Docker mount points confuse me a bit Share Structure /mnt/user ├── Downloads │ ├── Drop ├── Encode_Cache ├── Media │ ├── Movies │ └── Shows ├── Misc ├── Skip_Cache ├── appdata ├── domains ├── isos ├── recovery └── system Edited December 31, 2021 by mason1171 clarification Quote Link to comment
Djoss Posted January 1, 2022 Author Share Posted January 1, 2022 On 12/24/2021 at 8:21 PM, dellorianes said: Thank you for your replay. Find below the full container log: [s6-init] making user provided files available at /var/run/s6/etc...exited 0. [s6-init] ensuring user provided files have correct perms...exited 0. [fix-attrs.d] applying ownership & permissions fixes... [fix-attrs.d] done. [cont-init.d] executing container initialization scripts... [cont-init.d] 00-app-niceness.sh: executing... [cont-init.d] 00-app-niceness.sh: exited 0. [cont-init.d] 00-app-script.sh: executing... [cont-init.d] 00-app-script.sh: exited 0. [cont-init.d] 00-app-user-map.sh: executing... [cont-init.d] 00-app-user-map.sh: exited 0. [cont-init.d] 00-clean-logmonitor-states.sh: executing... [cont-init.d] 00-clean-logmonitor-states.sh: exited 0. [cont-init.d] 00-clean-tmp-dir.sh: executing... [cont-init.d] 00-clean-tmp-dir.sh: exited 0. [cont-init.d] 00-set-app-deps.sh: executing... [cont-init.d] 00-set-app-deps.sh: exited 0. [cont-init.d] 00-set-home.sh: executing... [cont-init.d] 00-set-home.sh: exited 0. [cont-init.d] 00-take-config-ownership.sh: executing... [cont-init.d] 00-take-config-ownership.sh: exited 0. [cont-init.d] 00-xdg-runtime-dir.sh: executing... [cont-init.d] 00-xdg-runtime-dir.sh: exited 0. [cont-init.d] 10-certs.sh: executing... [cont-init.d] 10-certs.sh: exited 0. [cont-init.d] 10-cjk-font.sh: executing... [cont-init.d] 10-cjk-font.sh: exited 0. [cont-init.d] 10-nginx.sh: executing... [cont-init.d] 10-nginx.sh: exited 0. [cont-init.d] 10-vnc-password.sh: executing... [cont-init.d] 10-vnc-password.sh: exited 0. [cont-init.d] 10-web-index.sh: executing... [cont-init.d] 10-web-index.sh: exited 0. [cont-init.d] filebot.sh: executing... Enter OpenSubtitles username: Enter OpenSubtitles password: Testing OpenSubtitles... OK Done ヾ(@⌒ー⌒@)ノ [cont-init.d] filebot.sh: exited 0. [cont-init.d] done. [services.d] starting services [services.d] starting s6-fdholderd... [services.d] starting certsmonitor... [services.d] starting nginx... [services.d] starting xvfb... [nginx] starting... [certsmonitor] disabling service: secure connection not enabled. [xvfb] starting... [services.d] starting amc... [services.d] starting logmonitor... [services.d] starting statusmonitor... [logmonitor] no file to monitor: disabling service... [services.d] starting openbox... [statusmonitor] no file to monitor: disabling service... [openbox] starting... [amc] Changes detected in input folder. [amc] Waiting 10 seconds before proceeding... [services.d] starting x11vnc... [services.d] starting app... [x11vnc] starting... [app] starting FileBot... [services.d] done. 25/12/2021 02:07:21 passing arg to libvncserver: -rfbport 25/12/2021 02:07:21 passing arg to libvncserver: 5900 25/12/2021 02:07:21 passing arg to libvncserver: -rfbportv6 25/12/2021 02:07:21 passing arg to libvncserver: -1 25/12/2021 02:07:21 passing arg to libvncserver: -httpportv6 25/12/2021 02:07:21 passing arg to libvncserver: -1 25/12/2021 02:07:21 passing arg to libvncserver: -desktop 25/12/2021 02:07:21 passing arg to libvncserver: FileBot 25/12/2021 02:07:21 x11vnc version: 0.9.14 lastmod: 2015-11-14 pid: 963 25/12/2021 02:07:21 Using X display :0 25/12/2021 02:07:21 rootwin: 0x43 reswin: 0x400001 dpy: 0xe16f29e0 25/12/2021 02:07:21 25/12/2021 02:07:21 ------------------ USEFUL INFORMATION ------------------ 25/12/2021 02:07:21 X DAMAGE available on display, using it for polling hints. 25/12/2021 02:07:21 To disable this behavior use: '-noxdamage' 25/12/2021 02:07:21 25/12/2021 02:07:21 Most compositing window managers like 'compiz' or 'beryl' 25/12/2021 02:07:21 cause X DAMAGE to fail, and so you may not see any screen 25/12/2021 02:07:21 updates via VNC. Either disable 'compiz' (recommended) or 25/12/2021 02:07:21 supply the x11vnc '-noxdamage' command line option. 25/12/2021 02:07:21 X COMPOSITE available on display, using it for window polling. 25/12/2021 02:07:21 To disable this behavior use: '-noxcomposite' 25/12/2021 02:07:21 25/12/2021 02:07:21 Wireframing: -wireframe mode is in effect for window moves. 25/12/2021 02:07:21 If this yields undesired behavior (poor response, painting 25/12/2021 02:07:21 errors, etc) it may be disabled: 25/12/2021 02:07:21 - use '-nowf' to disable wireframing completely. 25/12/2021 02:07:21 - use '-nowcr' to disable the Copy Rectangle after the 25/12/2021 02:07:21 moved window is released in the new position. 25/12/2021 02:07:21 Also see the -help entry for tuning parameters. 25/12/2021 02:07:21 You can press 3 Alt_L's (Left "Alt" key) in a row to 25/12/2021 02:07:21 repaint the screen, also see the -fixscreen option for 25/12/2021 02:07:21 periodic repaints. 25/12/2021 02:07:21 GrabServer control via XTEST. 25/12/2021 02:07:21 25/12/2021 02:07:21 Scroll Detection: -scrollcopyrect mode is in effect to 25/12/2021 02:07:21 use RECORD extension to try to detect scrolling windows 25/12/2021 02:07:21 (induced by either user keystroke or mouse input). 25/12/2021 02:07:21 If this yields undesired behavior (poor response, painting 25/12/2021 02:07:21 errors, etc) it may be disabled via: '-noscr' 25/12/2021 02:07:21 Also see the -help entry for tuning parameters. 25/12/2021 02:07:21 You can press 3 Alt_L's (Left "Alt" key) in a row to 25/12/2021 02:07:21 repaint the screen, also see the -fixscreen option for 25/12/2021 02:07:21 periodic repaints. 25/12/2021 02:07:21 25/12/2021 02:07:21 XKEYBOARD: number of keysyms per keycode 7 is greater 25/12/2021 02:07:21 than 4 and 51 keysyms are mapped above 4. 25/12/2021 02:07:21 Automatically switching to -xkb mode. 25/12/2021 02:07:21 If this makes the key mapping worse you can 25/12/2021 02:07:21 disable it with the "-noxkb" option. 25/12/2021 02:07:21 Also, remember "-remap DEAD" for accenting characters. 25/12/2021 02:07:21 25/12/2021 02:07:21 X FBPM extension not supported. Xlib: extension "DPMS" missing on display ":0". 25/12/2021 02:07:21 X display is not capable of DPMS. 25/12/2021 02:07:21 -------------------------------------------------------- 25/12/2021 02:07:21 25/12/2021 02:07:21 Default visual ID: 0x21 25/12/2021 02:07:21 Read initial data from X display into framebuffer. 25/12/2021 02:07:21 initialize_screen: fb_depth/fb_bpp/fb_Bpl 24/32/7680 25/12/2021 02:07:21 25/12/2021 02:07:21 X display :0 is 32bpp depth=24 true color 25/12/2021 02:07:21 25/12/2021 02:07:21 Listening for VNC connections on TCP port 5900 25/12/2021 02:07:21 25/12/2021 02:07:21 Xinerama is present and active (e.g. multi-head). 25/12/2021 02:07:21 Xinerama: number of sub-screens: 1 25/12/2021 02:07:21 Xinerama: no blackouts needed (only one sub-screen) 25/12/2021 02:07:21 25/12/2021 02:07:21 fb read rate: 2300 MB/sec 25/12/2021 02:07:21 fast read: reset -wait ms to: 10 25/12/2021 02:07:21 fast read: reset -defer ms to: 10 25/12/2021 02:07:21 The X server says there are 10 mouse buttons. 25/12/2021 02:07:21 screen setup finished. 25/12/2021 02:07:21 The VNC desktop is: 4776ad38f83d:0 0 ****************************************************************************** Have you tried the x11vnc '-ncache' VNC client-side pixel caching feature yet? The scheme stores pixel data offscreen on the VNC viewer side for faster retrieval. It should work with any VNC viewer. Try it by running: x11vnc -ncache 10 ... One can also add -ncache_cr for smooth 'copyrect' window motion. More info: http://www.karlrunge.com/x11vnc/faq.html#faq-client-caching FileBot 4.9.4 (r8736) JDK8 JNA Native: 5.2.2 MediaInfo: 21.03 Tools: fpcalc/1.4.3 p7zip/16.02 unrar/5.61 Extended Attributes: OK Unicode Filesystem: OK Script Bundle: 2021-08-02 (r761) Groovy: 3.0.8 JRE: OpenJDK Runtime Environment 1.8.0_275 JVM: 64-bit OpenJDK 64-Bit Server VM CPU/MEM: 8 Core / 14 GB Max Memory / 60 MB Used Memory OS: Linux (amd64) HW: Linux 4776ad38f83d 5.10.28-Unraid #1 SMP Wed Apr 7 08:23:18 PDT 2021 x86_64 GNU/Linux CPU/MEM: Intel(R) Core(TM) i7-9700 CPU @ 3.00GHz [MemTotal: 67 GB | MemFree: 2.5 GB | MemAvailable: 51 GB] STORAGE: btrfs [/] @ 91 GB | fuse.shfs [/storage] @ 13 TB | fuse.shfs [/watch] @ 220 GB | fuse.shfs [/output] @ 13 TB | fuse.shfs [/config] @ 220 GB p DATA: /config Package: DOCKER License: FileBot License PX31705185 (Valid-Until: 2071-12-15) (process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. Done ヾ(@⌒ー⌒@)ノ (process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. (process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly. Done ヾ(@⌒ー⌒@)ノ [amc] Invoking AMC script... [amc] ,: No Such File: /run/s6/services/amc/, [amc] Run script [fn:amc] at [Sat Dec 25 02:07:30 CET 2021] [amc] Parameter: artwork = y [amc] Parameter: music = y [amc] Parameter: clean = y [amc] Parameter: excludeList = /config/amc-exlude-list.txt [amc] Parameter: movieFormat = /output/Peliculas/{ny}/{ny} - {vf} - {vc} - {vcf} - {hdr} - {aco} [amc] Parameter: musicFormat = {plex} [amc] Parameter: seriesFormat = /output/Series/{n}/{'Season '+s}/{n} - {s00e00} - {t} - {vf} - {vc} - {vcf} - {hdr} - {aco} [amc] Parameter: animeFormat = /output/Peliculas/{ny}/{ny} - {vf} - {vc} - {vcf} - {hdr} - {aco} [amc] Parameter: subtitles = es [amc] Parameter: skipExtract = n [amc] Argument[0]: /watch [amc] Run script [fn:amc] at [Sat Dec 25 02:07:30 CET 2021] [amc] Parameter: artwork = y [amc] Parameter: music = y [amc] Parameter: clean = y [amc] Parameter: excludeList = /config/amc-exlude-list.txt [amc] Parameter: movieFormat = /output/Peliculas/{ny}/{ny} - {vf} - {vc} - {vcf} - {hdr} - {aco} [amc] Parameter: musicFormat = {plex} [amc] Parameter: seriesFormat = /output/Series/{n}/{'Season '+s}/{n} - {s00e00} - {t} - {vf} - {vc} - {vcf} - {hdr} - {aco} [amc] Parameter: animeFormat = /output/Peliculas/{ny}/{ny} - {vf} - {vc} - {vcf} - {hdr} - {aco} [amc] Parameter: subtitles = es [amc] Parameter: skipExtract = n [amc] Argument[0]: /watch [amc] Use excludes: /config/amc-exlude-list.txt (35) [amc] No files selected for processing [amc] Done ¯_(ツ)_/¯ Theese errors appear once container is starting. Container starts witout problem, but I need to restart the container to amc scripts work. I am also using the amc JDonloader 2 scripts. Thank you in advance Can you share the full config of the container, by providing the output of "docker inspect FileBot" ? The problem may come from the value of one of the environment variable. Quote Link to comment
Djoss Posted January 1, 2022 Author Share Posted January 1, 2022 4 hours ago, mason1171 said: Can I get some help with streamlining my config for proper AMC moving not copying then deleting please? Docker mount points confuse me a bit Share Structure /mnt/user ├── Downloads │ ├── Drop ├── Encode_Cache ├── Media │ ├── Movies │ └── Shows ├── Misc ├── Skip_Cache ├── appdata ├── domains ├── isos ├── recovery └── system You need to make sure that you use a single mount point. So I would add a new "Path", where you map /mnt/user to /workdir in the container. Then set: "Automated Media Center: Input Directory" --> /workdir/Downloads/Drop "Automated Media Center: Movie Format" --> /workdir/media/Movies/... "Automated Media Center: TV Series Format" --> /workdir/media/Shows/... 2 Quote Link to comment
mason1171 Posted January 1, 2022 Share Posted January 1, 2022 1 minute ago, Djoss said: You need to make sure that you use a single mount point. So I would add a new "Path", where you map /mnt/user to /workdir in the container. Then set: "Automated Media Center: Input Directory" --> /workdir/Downloads/Drop "Automated Media Center: Movie Format" --> /workdir/media/Movies/... "Automated Media Center: TV Series Format" --> /workdir/media/Shows/... I'll check it out. Thank you very much Quote Link to comment
mason1171 Posted January 1, 2022 Share Posted January 1, 2022 You need to make sure that you use a single mount point. So I would add a new "Path", where you map /mnt/user to /workdir in the container. Then set: "Automated Media Center: Input Directory" --> /workdir/Downloads/Drop "Automated Media Center: Movie Format" --> /workdir/media/Movies/... "Automated Media Center: TV Series Format" --> /workdir/media/Shows/... Actually, im confused. What’s different between creating the workdir variable and using the storage variable? Quote Link to comment
Grzegorz Std Posted January 1, 2022 Share Posted January 1, 2022 Hi How to disable amc-exlude-list ? Quote Link to comment
alturismo Posted January 1, 2022 Share Posted January 1, 2022 1 hour ago, Grzegorz Std said: How to disable amc-exlude-list ? better question, why would you act like this ? may as note, once you disable it a fail move wil fail over and over and over ... again without exlusion. as this is a app related question, may as tipp, filebot dev is very active either in his forum and in his discord channel, may take a look there. in terms you really want todo something manually, filebot has a postprocess feature, so you could manually wipe, edit, ... the amc file maybe ... but again, i wouldnt recommend it Quote Link to comment
Djoss Posted January 1, 2022 Author Share Posted January 1, 2022 17 hours ago, mason1171 said: Actually, im confused. What’s different between creating the workdir variable and using the storage variable? Both will do the same thing. If you prefer to re-use the storage setting, just make sure to change its access mode to read/write. By default it's read-only. Quote Link to comment
dellorianes Posted January 4, 2022 Share Posted January 4, 2022 On 1/1/2022 at 4:00 AM, Djoss said: Can you share the full config of the container, by providing the output of "docker inspect FileBot" ? The problem may come from the value of one of the environment variable. Find below complete "docker inspect Filebot": root@NASDiego:~# docker inspect FileBot [ { "Id": "ece6ad3e4dc1f4715929b484c73d380ffe8fa1be452ba4403075d13a92d10c9e", "Created": "2021-12-29T14:53:32.161791181Z", "Path": "/init", "Args": [], "State": { "Status": "running", "Running": true, "Paused": false, "Restarting": false, "OOMKilled": false, "Dead": false, "Pid": 24316, "ExitCode": 0, "Error": "", "StartedAt": "2022-01-04T06:25:47.937909308Z", "FinishedAt": "2022-01-04T05:49:52.026513317Z" }, "Image": "sha256:7fb0bdde56aaad3942e268b1e4cd743627ebdd3801fe1df0999855cce1dc3d5d", "ResolvConfPath": "/var/lib/docker/containers/ece6ad3e4dc1f4715929b484c73d380ffe8fa1be452ba4403075d13a92d10c9e/resolv.conf", "HostnamePath": "/var/lib/docker/containers/ece6ad3e4dc1f4715929b484c73d380ffe8fa1be452ba4403075d13a92d10c9e/hostname", "HostsPath": "/var/lib/docker/containers/ece6ad3e4dc1f4715929b484c73d380ffe8fa1be452ba4403075d13a92d10c9e/hosts", "LogPath": "/var/lib/docker/containers/ece6ad3e4dc1f4715929b484c73d380ffe8fa1be452ba4403075d13a92d10c9e/ece6ad3e4dc1f4715929b484c73d380ffe8fa1be452ba4403075d13a92d10c9e-json.log", "Name": "/FileBot", "RestartCount": 0, "Driver": "btrfs", "Platform": "linux", "MountLabel": "", "ProcessLabel": "", "AppArmorProfile": "", "ExecIDs": null, "HostConfig": { "Binds": [ "/mnt/user:/storage:rw", "/mnt/user/appdata/JDownloader2/Descargas/:/watch:rw", "/mnt/user/:/output:rw", "/mnt/user/appdata/FileBot:/config:rw" ], "ContainerIDFile": "", "LogConfig": { "Type": "json-file", "Config": { "max-file": "1", "max-size": "50m" } }, "NetworkMode": "diegonas", "PortBindings": { "5800/tcp": [ { "HostIp": "", "HostPort": "5800" } ], "5900/tcp": [ { "HostIp": "", "HostPort": "5900" } ] }, "RestartPolicy": { "Name": "no", "MaximumRetryCount": 0 }, "AutoRemove": false, "VolumeDriver": "", "VolumesFrom": null, "CapAdd": null, "CapDrop": null, "CgroupnsMode": "host", "Dns": [], "DnsOptions": [], "DnsSearch": [], "ExtraHosts": null, "GroupAdd": null, "IpcMode": "private", "Cgroup": "", "Links": null, "OomScoreAdj": 0, "PidMode": "", "Privileged": false, "PublishAllPorts": false, "ReadonlyRootfs": false, "SecurityOpt": null, "UTSMode": "", "UsernsMode": "", "ShmSize": 67108864, "Runtime": "runc", "ConsoleSize": [ 0, 0 ], "Isolation": "", "CpuShares": 0, "Memory": 0, "NanoCpus": 0, "CgroupParent": "", "BlkioWeight": 0, "BlkioWeightDevice": [], "BlkioDeviceReadBps": null, "BlkioDeviceWriteBps": null, "BlkioDeviceReadIOps": null, "BlkioDeviceWriteIOps": null, "CpuPeriod": 0, "CpuQuota": 0, "CpuRealtimePeriod": 0, "CpuRealtimeRuntime": 0, "CpusetCpus": "", "CpusetMems": "", "Devices": [], "DeviceCgroupRules": null, "DeviceRequests": null, "KernelMemory": 0, "KernelMemoryTCP": 0, "MemoryReservation": 0, "MemorySwap": 0, "MemorySwappiness": null, "OomKillDisable": false, "PidsLimit": null, "Ulimits": null, "CpuCount": 0, "CpuPercent": 0, "IOMaximumIOps": 0, "IOMaximumBandwidth": 0, "MaskedPaths": [ "/proc/asound", "/proc/acpi", "/proc/kcore", "/proc/keys", "/proc/latency_stats", "/proc/timer_list", "/proc/timer_stats", "/proc/sched_debug", "/proc/scsi", "/sys/firmware" ], "ReadonlyPaths": [ "/proc/bus", "/proc/fs", "/proc/irq", "/proc/sys", "/proc/sysrq-trigger" ] }, "GraphDriver": { "Data": null, "Name": "btrfs" }, "Mounts": [ { "Type": "bind", "Source": "/mnt/user/appdata/JDownloader2/Descargas", "Destination": "/watch", "Mode": "rw", "RW": true, "Propagation": "rprivate" }, { "Type": "bind", "Source": "/mnt/user/appdata/FileBot", "Destination": "/config", "Mode": "rw", "RW": true, "Propagation": "rprivate" }, { "Type": "bind", "Source": "/mnt/user", "Destination": "/output", "Mode": "rw", "RW": true, "Propagation": "rprivate" }, { "Type": "bind", "Source": "/mnt/user", "Destination": "/storage", "Mode": "rw", "RW": true, "Propagation": "rprivate" } ], "Config": { "Hostname": "ece6ad3e4dc1", "Domainname": "", "User": "", "AttachStdin": false, "AttachStdout": false, "AttachStderr": false, "ExposedPorts": { "5800/tcp": {}, "5900/tcp": {} }, "Tty": false, "OpenStdin": false, "StdinOnce": false, "Env": [ "AMC_ANIME_FORMAT=/output/Peliculas/{ny}/{ny} - {vc} - {vcf} - {hdr} - {vf} ", "UMASK=000", "SECURE_CONNECTION=0", "AMC_OUTPUT_DIR=/output", "AMC_INTERVAL=1800", "AMC_INPUT_STABLE_TIME=10", "AMC_CONFLICT=auto", "AMC_MOVIE_FORMAT=/output/Peliculas/{ny.upperInitial()}/{ny.upperInitial()} - {vc} - {vcf} - {hdr} - {vf}", "FILEBOT_CUSTOM_OPTIONS=", "AMC_INSTALL_PKGS=", "AMC_SERIES_FORMAT=/output/Series/{n.upperInitial()}/{'Season '+s}/{n.upperInitial()} - {s00e00} - {t.upperInitial()} - {vc} - {vcf} - {hdr} - {vf}", "GROUP_ID=100", "DISPLAY_WIDTH=1920", "AMC_CUSTOM_OPTIONS=--def skipExtract=n , --lang es", "TZ=Europe/Paris", "AMC_MATCH_MODE=opportunistic", "AMC_INPUT_DIR=/watch", "OPENSUBTITLES_PASSWORD=**********, "AMC_ACTION=move", "AMC_SUBTITLE_LANG=es", "USER_ID=99", "OPENSUBTITLES_USERNAME=*********", "HOST_OS=Unraid", "AMC_PROCESS_MUSIC=y", "APP_NICENESS=", "X11VNC_EXTRA_OPTS=", "AMC_ARTWORK=y", "AMC_MUSIC_FORMAT={plex}", "DISPLAY_HEIGHT=1080", "PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin", "LANG=en_US.UTF-8", "S6_BEHAVIOUR_IF_STAGE2_FAILS=3", "S6_SERVICE_DEPS=1", "APP_NAME=FileBot", "APP_USER=app", "XDG_DATA_HOME=/config/xdg/data", "XDG_CONFIG_HOME=/config/xdg/config", "XDG_CACHE_HOME=/config/xdg/cache", "XDG_RUNTIME_DIR=/tmp/run/user/app", "DISPLAY=:0" ], "Cmd": [ "/init" ], "Image": "jlesage/filebot", "Volumes": { "/config": {}, "/output": {}, "/storage": {}, "/watch": {} }, "WorkingDir": "/tmp", "Entrypoint": null, "OnBuild": null, "Labels": { "org.label-schema.description": "Docker container for FileBot", "org.label-schema.name": "filebot", "org.label-schema.schema-version": "1.0", "org.label-schema.vcs-url": "https://github.com/jlesage/docker-filebot", "org.label-schema.version": "1.12.0", "org.opencontainers.image.created": "2021-10-15T12:00:22Z", "org.opencontainers.image.revision": "a096c06c010fa890bc702e6ebd8ef8dd77923ceb", "org.opencontainers.image.source": "https://github.com/jlesage/docker-filebot.git", "org.opencontainers.image.url": "https://github.com/jlesage/docker-filebot" } }, "NetworkSettings": { "Bridge": "", "SandboxID": "73764e51a93e5cdfe22cdb7b7687ebd79d2d29f9965953ea00dccc5231da4be7", "HairpinMode": false, "LinkLocalIPv6Address": "", "LinkLocalIPv6PrefixLen": 0, "Ports": { "5800/tcp": [ { "HostIp": "0.0.0.0", "HostPort": "5800" } ], "5900/tcp": [ { "HostIp": "0.0.0.0", "HostPort": "5900" } ] }, "SandboxKey": "/var/run/docker/netns/73764e51a93e", "SecondaryIPAddresses": null, "SecondaryIPv6Addresses": null, "EndpointID": "", "Gateway": "", "GlobalIPv6Address": "", "GlobalIPv6PrefixLen": 0, "IPAddress": "", "IPPrefixLen": 0, "IPv6Gateway": "", "MacAddress": "", "Networks": { "diegonas": { "IPAMConfig": null, "Links": null, "Aliases": [ "ece6ad3e4dc1" ], "NetworkID": "bdd804195968a41b718d7cff82229eac4ad24c0b966ba66eea3893b8e6be98bd", "EndpointID": "5d27ae1a046b344bb3e4577df7cb47b419806dd647d0fa75470162960da4f686", "Gateway": "172.18.0.1", "IPAddress": "172.18.0.3", "IPPrefixLen": 16, "IPv6Gateway": "", "GlobalIPv6Address": "", "GlobalIPv6PrefixLen": 0, "MacAddress": "02:42:ac:12:00:03", "DriverOpts": null } } } } ] Thank you again Quote Link to comment
Djoss Posted January 5, 2022 Author Share Posted January 5, 2022 16 hours ago, dellorianes said: Find below complete "docker inspect Filebot": root@NASDiego:~# docker inspect FileBot [ { "Id": "ece6ad3e4dc1f4715929b484c73d380ffe8fa1be452ba4403075d13a92d10c9e", "Created": "2021-12-29T14:53:32.161791181Z", "Path": "/init", "Args": [], "State": { "Status": "running", "Running": true, "Paused": false, "Restarting": false, "OOMKilled": false, "Dead": false, "Pid": 24316, "ExitCode": 0, "Error": "", "StartedAt": "2022-01-04T06:25:47.937909308Z", "FinishedAt": "2022-01-04T05:49:52.026513317Z" }, "Image": "sha256:7fb0bdde56aaad3942e268b1e4cd743627ebdd3801fe1df0999855cce1dc3d5d", "ResolvConfPath": "/var/lib/docker/containers/ece6ad3e4dc1f4715929b484c73d380ffe8fa1be452ba4403075d13a92d10c9e/resolv.conf", "HostnamePath": "/var/lib/docker/containers/ece6ad3e4dc1f4715929b484c73d380ffe8fa1be452ba4403075d13a92d10c9e/hostname", "HostsPath": "/var/lib/docker/containers/ece6ad3e4dc1f4715929b484c73d380ffe8fa1be452ba4403075d13a92d10c9e/hosts", "LogPath": "/var/lib/docker/containers/ece6ad3e4dc1f4715929b484c73d380ffe8fa1be452ba4403075d13a92d10c9e/ece6ad3e4dc1f4715929b484c73d380ffe8fa1be452ba4403075d13a92d10c9e-json.log", "Name": "/FileBot", "RestartCount": 0, "Driver": "btrfs", "Platform": "linux", "MountLabel": "", "ProcessLabel": "", "AppArmorProfile": "", "ExecIDs": null, "HostConfig": { "Binds": [ "/mnt/user:/storage:rw", "/mnt/user/appdata/JDownloader2/Descargas/:/watch:rw", "/mnt/user/:/output:rw", "/mnt/user/appdata/FileBot:/config:rw" ], "ContainerIDFile": "", "LogConfig": { "Type": "json-file", "Config": { "max-file": "1", "max-size": "50m" } }, "NetworkMode": "diegonas", "PortBindings": { "5800/tcp": [ { "HostIp": "", "HostPort": "5800" } ], "5900/tcp": [ { "HostIp": "", "HostPort": "5900" } ] }, "RestartPolicy": { "Name": "no", "MaximumRetryCount": 0 }, "AutoRemove": false, "VolumeDriver": "", "VolumesFrom": null, "CapAdd": null, "CapDrop": null, "CgroupnsMode": "host", "Dns": [], "DnsOptions": [], "DnsSearch": [], "ExtraHosts": null, "GroupAdd": null, "IpcMode": "private", "Cgroup": "", "Links": null, "OomScoreAdj": 0, "PidMode": "", "Privileged": false, "PublishAllPorts": false, "ReadonlyRootfs": false, "SecurityOpt": null, "UTSMode": "", "UsernsMode": "", "ShmSize": 67108864, "Runtime": "runc", "ConsoleSize": [ 0, 0 ], "Isolation": "", "CpuShares": 0, "Memory": 0, "NanoCpus": 0, "CgroupParent": "", "BlkioWeight": 0, "BlkioWeightDevice": [], "BlkioDeviceReadBps": null, "BlkioDeviceWriteBps": null, "BlkioDeviceReadIOps": null, "BlkioDeviceWriteIOps": null, "CpuPeriod": 0, "CpuQuota": 0, "CpuRealtimePeriod": 0, "CpuRealtimeRuntime": 0, "CpusetCpus": "", "CpusetMems": "", "Devices": [], "DeviceCgroupRules": null, "DeviceRequests": null, "KernelMemory": 0, "KernelMemoryTCP": 0, "MemoryReservation": 0, "MemorySwap": 0, "MemorySwappiness": null, "OomKillDisable": false, "PidsLimit": null, "Ulimits": null, "CpuCount": 0, "CpuPercent": 0, "IOMaximumIOps": 0, "IOMaximumBandwidth": 0, "MaskedPaths": [ "/proc/asound", "/proc/acpi", "/proc/kcore", "/proc/keys", "/proc/latency_stats", "/proc/timer_list", "/proc/timer_stats", "/proc/sched_debug", "/proc/scsi", "/sys/firmware" ], "ReadonlyPaths": [ "/proc/bus", "/proc/fs", "/proc/irq", "/proc/sys", "/proc/sysrq-trigger" ] }, "GraphDriver": { "Data": null, "Name": "btrfs" }, "Mounts": [ { "Type": "bind", "Source": "/mnt/user/appdata/JDownloader2/Descargas", "Destination": "/watch", "Mode": "rw", "RW": true, "Propagation": "rprivate" }, { "Type": "bind", "Source": "/mnt/user/appdata/FileBot", "Destination": "/config", "Mode": "rw", "RW": true, "Propagation": "rprivate" }, { "Type": "bind", "Source": "/mnt/user", "Destination": "/output", "Mode": "rw", "RW": true, "Propagation": "rprivate" }, { "Type": "bind", "Source": "/mnt/user", "Destination": "/storage", "Mode": "rw", "RW": true, "Propagation": "rprivate" } ], "Config": { "Hostname": "ece6ad3e4dc1", "Domainname": "", "User": "", "AttachStdin": false, "AttachStdout": false, "AttachStderr": false, "ExposedPorts": { "5800/tcp": {}, "5900/tcp": {} }, "Tty": false, "OpenStdin": false, "StdinOnce": false, "Env": [ "AMC_ANIME_FORMAT=/output/Peliculas/{ny}/{ny} - {vc} - {vcf} - {hdr} - {vf} ", "UMASK=000", "SECURE_CONNECTION=0", "AMC_OUTPUT_DIR=/output", "AMC_INTERVAL=1800", "AMC_INPUT_STABLE_TIME=10", "AMC_CONFLICT=auto", "AMC_MOVIE_FORMAT=/output/Peliculas/{ny.upperInitial()}/{ny.upperInitial()} - {vc} - {vcf} - {hdr} - {vf}", "FILEBOT_CUSTOM_OPTIONS=", "AMC_INSTALL_PKGS=", "AMC_SERIES_FORMAT=/output/Series/{n.upperInitial()}/{'Season '+s}/{n.upperInitial()} - {s00e00} - {t.upperInitial()} - {vc} - {vcf} - {hdr} - {vf}", "GROUP_ID=100", "DISPLAY_WIDTH=1920", "AMC_CUSTOM_OPTIONS=--def skipExtract=n , --lang es", "TZ=Europe/Paris", "AMC_MATCH_MODE=opportunistic", "AMC_INPUT_DIR=/watch", "OPENSUBTITLES_PASSWORD=**********, "AMC_ACTION=move", "AMC_SUBTITLE_LANG=es", "USER_ID=99", "OPENSUBTITLES_USERNAME=*********", "HOST_OS=Unraid", "AMC_PROCESS_MUSIC=y", "APP_NICENESS=", "X11VNC_EXTRA_OPTS=", "AMC_ARTWORK=y", "AMC_MUSIC_FORMAT={plex}", "DISPLAY_HEIGHT=1080", "PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin", "LANG=en_US.UTF-8", "S6_BEHAVIOUR_IF_STAGE2_FAILS=3", "S6_SERVICE_DEPS=1", "APP_NAME=FileBot", "APP_USER=app", "XDG_DATA_HOME=/config/xdg/data", "XDG_CONFIG_HOME=/config/xdg/config", "XDG_CACHE_HOME=/config/xdg/cache", "XDG_RUNTIME_DIR=/tmp/run/user/app", "DISPLAY=:0" ], "Cmd": [ "/init" ], "Image": "jlesage/filebot", "Volumes": { "/config": {}, "/output": {}, "/storage": {}, "/watch": {} }, "WorkingDir": "/tmp", "Entrypoint": null, "OnBuild": null, "Labels": { "org.label-schema.description": "Docker container for FileBot", "org.label-schema.name": "filebot", "org.label-schema.schema-version": "1.0", "org.label-schema.vcs-url": "https://github.com/jlesage/docker-filebot", "org.label-schema.version": "1.12.0", "org.opencontainers.image.created": "2021-10-15T12:00:22Z", "org.opencontainers.image.revision": "a096c06c010fa890bc702e6ebd8ef8dd77923ceb", "org.opencontainers.image.source": "https://github.com/jlesage/docker-filebot.git", "org.opencontainers.image.url": "https://github.com/jlesage/docker-filebot" } }, "NetworkSettings": { "Bridge": "", "SandboxID": "73764e51a93e5cdfe22cdb7b7687ebd79d2d29f9965953ea00dccc5231da4be7", "HairpinMode": false, "LinkLocalIPv6Address": "", "LinkLocalIPv6PrefixLen": 0, "Ports": { "5800/tcp": [ { "HostIp": "0.0.0.0", "HostPort": "5800" } ], "5900/tcp": [ { "HostIp": "0.0.0.0", "HostPort": "5900" } ] }, "SandboxKey": "/var/run/docker/netns/73764e51a93e", "SecondaryIPAddresses": null, "SecondaryIPv6Addresses": null, "EndpointID": "", "Gateway": "", "GlobalIPv6Address": "", "GlobalIPv6PrefixLen": 0, "IPAddress": "", "IPPrefixLen": 0, "IPv6Gateway": "", "MacAddress": "", "Networks": { "diegonas": { "IPAMConfig": null, "Links": null, "Aliases": [ "ece6ad3e4dc1" ], "NetworkID": "bdd804195968a41b718d7cff82229eac4ad24c0b966ba66eea3893b8e6be98bd", "EndpointID": "5d27ae1a046b344bb3e4577df7cb47b419806dd647d0fa75470162960da4f686", "Gateway": "172.18.0.1", "IPAddress": "172.18.0.3", "IPPrefixLen": 16, "IPv6Gateway": "", "GlobalIPv6Address": "", "GlobalIPv6PrefixLen": 0, "MacAddress": "02:42:ac:12:00:03", "DriverOpts": null } } } } ] Thank you again Can you try to remove the comma from your AMC_CUSTOM_OPTIONS, like this: --def skipExtract=n --lang es Quote Link to comment
dellorianes Posted January 8, 2022 Share Posted January 8, 2022 On 1/5/2022 at 2:16 AM, Djoss said: Can you try to remove the comma from your AMC_CUSTOM_OPTIONS, like this: --def skipExtract=n --lang es Removing "comma", continues the same. As posted before, this error ((process:993): dconf-CRITICAL) dessapears if I change the ID and group to root (0). The problem then is that Filebot UI does not work (with root ID). Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.