[Support] Djoss - FileBot


Recommended Posts

I recently started consolidating media that was in my watchfolder from all of my smaller drives to one large. I did that so I could replace them with bigger drives. I have updated the unraid share (which my watchfolder is pointed at) to only include the new drives where they are stored but now filebot is processing many items that have already been processed. I should note that I do have an excludes file setup and it does get updated after running. 

 

Any idea why it's starting to process old stuff a 2nd time?

Edited by ikkuranus
Link to comment

I upgraded unraid to 6.10.0-rc2 an i got this error trying to rename a file.

 

MOVE: Access Denied: /storage/Plex/Holding-for-renaming/The.Good.Doctor.S05E07.1080p.WEB.H264.mkv -> /storage/Plex/Holding-for-renaming/The Good Doctor - S05E07 - Expired [328634][1080p].mkv

 

when i went back to 6.9.2 i was able to rename files again. how can i fix this?

Link to comment
On 11/23/2021 at 2:12 AM, ikkuranus said:

I recently started consolidating media that was in my watchfolder from all of my smaller drives to one large. I did that so I could replace them with bigger drives. I have updated the unraid share (which my watchfolder is pointed at) to only include the new drives where they are stored but now filebot is processing many items that have already been processed. I should note that I do have an excludes file setup and it does get updated after running. 

 

Any idea why it's starting to process old stuff a 2nd time?

 

The AMC script invoked by the container uses /mnt/user/appdata/FileBot/amc-exlude-list.txt.

Do you see your already-processed files in it ?

Link to comment
  • 3 weeks later...

Hi,

 

I am trying to setup Filebot by first time, with AMC, but at the start of the program it gives me the following errors:

 



(process:963): dconf-CRITICAL **: 10:46:51.288: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:963): dconf-CRITICAL **: 10:46:51.289: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:963): dconf-CRITICAL **: 10:46:51.289: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:963): dconf-CRITICAL **: 10:46:51.289: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:963): dconf-CRITICAL **: 10:46:51.289: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:963): dconf-CRITICAL **: 10:46:51.289: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:963): dconf-CRITICAL **: 10:46:51.289: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:963): dconf-CRITICAL **: 10:46:51.289: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:963): dconf-CRITICAL **: 10:46:51.290: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:963): dconf-CRITICAL **: 10:46:51.290: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.
Done ヾ(@⌒ー⌒@)ノ

 

Someone knows the reason?

 

I watch this reply in page 17 about the same error but, after new clean install (remove docker, remove historic container and remove appdata folder) i can not fix it.

 

Thank you in advance

 

Edit: As said in previous posts, changing ID and group to 0 (root) fixed the error.

 

Are there any problem, from my ignorance, for staying root permits?

Edited by dellorianes
Link to comment
3 hours ago, dellorianes said:

Hi,

 

I am trying to setup Filebot by first time, with AMC, but at the start of the program it gives me the following errors:

 



(process:963): dconf-CRITICAL **: 10:46:51.288: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:963): dconf-CRITICAL **: 10:46:51.289: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:963): dconf-CRITICAL **: 10:46:51.289: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:963): dconf-CRITICAL **: 10:46:51.289: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:963): dconf-CRITICAL **: 10:46:51.289: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:963): dconf-CRITICAL **: 10:46:51.289: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:963): dconf-CRITICAL **: 10:46:51.289: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:963): dconf-CRITICAL **: 10:46:51.289: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:963): dconf-CRITICAL **: 10:46:51.290: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:963): dconf-CRITICAL **: 10:46:51.290: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.
Done ヾ(@⌒ー⌒@)ノ

 

Someone knows the reason?

 

I watch this reply in page 17 about the same error but, after new clean install (remove docker, remove historic container and remove appdata folder) i can not fix it.

 

Thank you in advance

 

Edit: As said in previous posts, changing ID and group to 0 (root) fixed the error.

 

Are there any problem, from my ignorance, for staying root permits?

 

Running as root is not a good practice.  There is no need to give too much privileges to the container.

 

When exactly are you seeing these messages?  Are they preventing FileBot to run?

Can you provide the full container log ?

 

Link to comment
On 12/17/2021 at 2:54 PM, Djoss said:

 

Running as root is not a good practice.  There is no need to give too much privileges to the container.

 

When exactly are you seeing these messages?  Are they preventing FileBot to run?

Can you provide the full container log ?

 

Thank you for your replay.

 

Find below the full container log:

 

[s6-init] making user provided files available at /var/run/s6/etc...exited 0.
[s6-init] ensuring user provided files have correct perms...exited 0.
[fix-attrs.d] applying ownership & permissions fixes...
[fix-attrs.d] done.
[cont-init.d] executing container initialization scripts...
[cont-init.d] 00-app-niceness.sh: executing...
[cont-init.d] 00-app-niceness.sh: exited 0.
[cont-init.d] 00-app-script.sh: executing...
[cont-init.d] 00-app-script.sh: exited 0.
[cont-init.d] 00-app-user-map.sh: executing...
[cont-init.d] 00-app-user-map.sh: exited 0.
[cont-init.d] 00-clean-logmonitor-states.sh: executing...
[cont-init.d] 00-clean-logmonitor-states.sh: exited 0.
[cont-init.d] 00-clean-tmp-dir.sh: executing...
[cont-init.d] 00-clean-tmp-dir.sh: exited 0.
[cont-init.d] 00-set-app-deps.sh: executing...
[cont-init.d] 00-set-app-deps.sh: exited 0.
[cont-init.d] 00-set-home.sh: executing...
[cont-init.d] 00-set-home.sh: exited 0.
[cont-init.d] 00-take-config-ownership.sh: executing...
[cont-init.d] 00-take-config-ownership.sh: exited 0.
[cont-init.d] 00-xdg-runtime-dir.sh: executing...
[cont-init.d] 00-xdg-runtime-dir.sh: exited 0.
[cont-init.d] 10-certs.sh: executing...
[cont-init.d] 10-certs.sh: exited 0.
[cont-init.d] 10-cjk-font.sh: executing...
[cont-init.d] 10-cjk-font.sh: exited 0.
[cont-init.d] 10-nginx.sh: executing...
[cont-init.d] 10-nginx.sh: exited 0.
[cont-init.d] 10-vnc-password.sh: executing...
[cont-init.d] 10-vnc-password.sh: exited 0.
[cont-init.d] 10-web-index.sh: executing...
[cont-init.d] 10-web-index.sh: exited 0.
[cont-init.d] filebot.sh: executing...
Enter OpenSubtitles username: Enter OpenSubtitles password: Testing OpenSubtitles... OK
Done ヾ(@⌒ー⌒@)ノ
[cont-init.d] filebot.sh: exited 0.
[cont-init.d] done.
[services.d] starting services
[services.d] starting s6-fdholderd...
[services.d] starting certsmonitor...
[services.d] starting nginx...
[services.d] starting xvfb...
[nginx] starting...
[certsmonitor] disabling service: secure connection not enabled.
[xvfb] starting...
[services.d] starting amc...
[services.d] starting logmonitor...
[services.d] starting statusmonitor...
[logmonitor] no file to monitor: disabling service...
[services.d] starting openbox...
[statusmonitor] no file to monitor: disabling service...
[openbox] starting...
[amc] Changes detected in input folder.
[amc] Waiting 10 seconds before proceeding...
[services.d] starting x11vnc...
[services.d] starting app...
[x11vnc] starting...
[app] starting FileBot...
[services.d] done.
25/12/2021 02:07:21 passing arg to libvncserver: -rfbport
25/12/2021 02:07:21 passing arg to libvncserver: 5900
25/12/2021 02:07:21 passing arg to libvncserver: -rfbportv6
25/12/2021 02:07:21 passing arg to libvncserver: -1
25/12/2021 02:07:21 passing arg to libvncserver: -httpportv6
25/12/2021 02:07:21 passing arg to libvncserver: -1
25/12/2021 02:07:21 passing arg to libvncserver: -desktop
25/12/2021 02:07:21 passing arg to libvncserver: FileBot
25/12/2021 02:07:21 x11vnc version: 0.9.14 lastmod: 2015-11-14 pid: 963
25/12/2021 02:07:21 Using X display :0
25/12/2021 02:07:21 rootwin: 0x43 reswin: 0x400001 dpy: 0xe16f29e0
25/12/2021 02:07:21
25/12/2021 02:07:21 ------------------ USEFUL INFORMATION ------------------
25/12/2021 02:07:21 X DAMAGE available on display, using it for polling hints.
25/12/2021 02:07:21 To disable this behavior use: '-noxdamage'
25/12/2021 02:07:21
25/12/2021 02:07:21 Most compositing window managers like 'compiz' or 'beryl'
25/12/2021 02:07:21 cause X DAMAGE to fail, and so you may not see any screen
25/12/2021 02:07:21 updates via VNC. Either disable 'compiz' (recommended) or
25/12/2021 02:07:21 supply the x11vnc '-noxdamage' command line option.
25/12/2021 02:07:21 X COMPOSITE available on display, using it for window polling.
25/12/2021 02:07:21 To disable this behavior use: '-noxcomposite'
25/12/2021 02:07:21
25/12/2021 02:07:21 Wireframing: -wireframe mode is in effect for window moves.
25/12/2021 02:07:21 If this yields undesired behavior (poor response, painting
25/12/2021 02:07:21 errors, etc) it may be disabled:
25/12/2021 02:07:21 - use '-nowf' to disable wireframing completely.
25/12/2021 02:07:21 - use '-nowcr' to disable the Copy Rectangle after the
25/12/2021 02:07:21 moved window is released in the new position.
25/12/2021 02:07:21 Also see the -help entry for tuning parameters.
25/12/2021 02:07:21 You can press 3 Alt_L's (Left "Alt" key) in a row to
25/12/2021 02:07:21 repaint the screen, also see the -fixscreen option for
25/12/2021 02:07:21 periodic repaints.
25/12/2021 02:07:21 GrabServer control via XTEST.
25/12/2021 02:07:21
25/12/2021 02:07:21 Scroll Detection: -scrollcopyrect mode is in effect to
25/12/2021 02:07:21 use RECORD extension to try to detect scrolling windows
25/12/2021 02:07:21 (induced by either user keystroke or mouse input).
25/12/2021 02:07:21 If this yields undesired behavior (poor response, painting
25/12/2021 02:07:21 errors, etc) it may be disabled via: '-noscr'
25/12/2021 02:07:21 Also see the -help entry for tuning parameters.
25/12/2021 02:07:21 You can press 3 Alt_L's (Left "Alt" key) in a row to
25/12/2021 02:07:21 repaint the screen, also see the -fixscreen option for
25/12/2021 02:07:21 periodic repaints.
25/12/2021 02:07:21
25/12/2021 02:07:21 XKEYBOARD: number of keysyms per keycode 7 is greater
25/12/2021 02:07:21 than 4 and 51 keysyms are mapped above 4.
25/12/2021 02:07:21 Automatically switching to -xkb mode.
25/12/2021 02:07:21 If this makes the key mapping worse you can
25/12/2021 02:07:21 disable it with the "-noxkb" option.
25/12/2021 02:07:21 Also, remember "-remap DEAD" for accenting characters.
25/12/2021 02:07:21
25/12/2021 02:07:21 X FBPM extension not supported.
Xlib: extension "DPMS" missing on display ":0".
25/12/2021 02:07:21 X display is not capable of DPMS.
25/12/2021 02:07:21 --------------------------------------------------------
25/12/2021 02:07:21
25/12/2021 02:07:21 Default visual ID: 0x21
25/12/2021 02:07:21 Read initial data from X display into framebuffer.
25/12/2021 02:07:21 initialize_screen: fb_depth/fb_bpp/fb_Bpl 24/32/7680
25/12/2021 02:07:21
25/12/2021 02:07:21 X display :0 is 32bpp depth=24 true color
25/12/2021 02:07:21
25/12/2021 02:07:21 Listening for VNC connections on TCP port 5900
25/12/2021 02:07:21
25/12/2021 02:07:21 Xinerama is present and active (e.g. multi-head).
25/12/2021 02:07:21 Xinerama: number of sub-screens: 1
25/12/2021 02:07:21 Xinerama: no blackouts needed (only one sub-screen)
25/12/2021 02:07:21
25/12/2021 02:07:21 fb read rate: 2300 MB/sec
25/12/2021 02:07:21 fast read: reset -wait ms to: 10
25/12/2021 02:07:21 fast read: reset -defer ms to: 10
25/12/2021 02:07:21 The X server says there are 10 mouse buttons.
25/12/2021 02:07:21 screen setup finished.
25/12/2021 02:07:21

The VNC desktop is: 4776ad38f83d:0

0

******************************************************************************
Have you tried the x11vnc '-ncache' VNC client-side pixel caching feature yet?

The scheme stores pixel data offscreen on the VNC viewer side for faster
retrieval. It should work with any VNC viewer. Try it by running:

x11vnc -ncache 10 ...

One can also add -ncache_cr for smooth 'copyrect' window motion.
More info: http://www.karlrunge.com/x11vnc/faq.html#faq-client-caching

FileBot 4.9.4 (r8736) JDK8
JNA Native: 5.2.2
MediaInfo: 21.03
Tools: fpcalc/1.4.3 p7zip/16.02 unrar/5.61
Extended Attributes: OK
Unicode Filesystem: OK
Script Bundle: 2021-08-02 (r761)
Groovy: 3.0.8
JRE: OpenJDK Runtime Environment 1.8.0_275
JVM: 64-bit OpenJDK 64-Bit Server VM
CPU/MEM: 8 Core / 14 GB Max Memory / 60 MB Used Memory
OS: Linux (amd64)
HW: Linux 4776ad38f83d 5.10.28-Unraid #1 SMP Wed Apr 7 08:23:18 PDT 2021 x86_64 GNU/Linux
CPU/MEM: Intel(R) Core(TM) i7-9700 CPU @ 3.00GHz [MemTotal: 67 GB | MemFree: 2.5 GB | MemAvailable: 51 GB]
STORAGE: btrfs [/] @ 91 GB | fuse.shfs [/storage] @ 13 TB | fuse.shfs [/watch] @ 220 GB | fuse.shfs [/output] @ 13 TB | fuse.shfs [/config] @ 220 GB

p
DATA: /config
Package: DOCKER
License: FileBot License PX31705185 (Valid-Until: 2071-12-15)

(process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.
Done ヾ(@⌒ー⌒@)ノ

(process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.
Done ヾ(@⌒ー⌒@)ノ
[amc] Invoking AMC script...
[amc] ,: No Such File: /run/s6/services/amc/,
[amc] Run script [fn:amc] at [Sat Dec 25 02:07:30 CET 2021]
[amc] Parameter: artwork = y
[amc] Parameter: music = y
[amc] Parameter: clean = y
[amc] Parameter: excludeList = /config/amc-exlude-list.txt
[amc] Parameter: movieFormat = /output/Peliculas/{ny}/{ny} - {vf} - {vc} - {vcf} - {hdr} - {aco}
[amc] Parameter: musicFormat = {plex}
[amc] Parameter: seriesFormat = /output/Series/{n}/{'Season '+s}/{n} - {s00e00} - {t} - {vf} - {vc} - {vcf} - {hdr} - {aco}
[amc] Parameter: animeFormat = /output/Peliculas/{ny}/{ny} - {vf} - {vc} - {vcf} - {hdr} - {aco}
[amc] Parameter: subtitles = es
[amc] Parameter: skipExtract = n
[amc] Argument[0]: /watch
[amc] Run script [fn:amc] at [Sat Dec 25 02:07:30 CET 2021]
[amc] Parameter: artwork = y
[amc] Parameter: music = y
[amc] Parameter: clean = y
[amc] Parameter: excludeList = /config/amc-exlude-list.txt
[amc] Parameter: movieFormat = /output/Peliculas/{ny}/{ny} - {vf} - {vc} - {vcf} - {hdr} - {aco}
[amc] Parameter: musicFormat = {plex}
[amc] Parameter: seriesFormat = /output/Series/{n}/{'Season '+s}/{n} - {s00e00} - {t} - {vf} - {vc} - {vcf} - {hdr} - {aco}
[amc] Parameter: animeFormat = /output/Peliculas/{ny}/{ny} - {vf} - {vc} - {vcf} - {hdr} - {aco}
[amc] Parameter: subtitles = es
[amc] Parameter: skipExtract = n
[amc] Argument[0]: /watch
[amc] Use excludes: /config/amc-exlude-list.txt (35)
[amc] No files selected for processing
[amc] Done ¯_(ツ)_/¯

 

Theese errors appear once container is starting. Container starts witout problem, but I need to restart the container to amc scripts work.

I am also using the amc JDonloader 2 scripts.

 

Thank you in advance

Edited by dellorianes
Link to comment

BPgazbg.pngCan I get some help with streamlining my config for proper AMC moving not copying then deleting please? Docker mount points confuse me a bit 
Share Structure
/mnt/user
    ├── Downloads
    │   ├── Drop
    ├── Encode_Cache
    ├── Media
    │   ├── Movies
    │   └── Shows
    ├── Misc
    ├── Skip_Cache
    ├── appdata
    ├── domains
    ├── isos
    ├── recovery
    └── system

Edited by mason1171
clarification
Link to comment
On 12/24/2021 at 8:21 PM, dellorianes said:

Thank you for your replay.

 

Find below the full container log:

 

[s6-init] making user provided files available at /var/run/s6/etc...exited 0.
[s6-init] ensuring user provided files have correct perms...exited 0.
[fix-attrs.d] applying ownership & permissions fixes...
[fix-attrs.d] done.
[cont-init.d] executing container initialization scripts...
[cont-init.d] 00-app-niceness.sh: executing...
[cont-init.d] 00-app-niceness.sh: exited 0.
[cont-init.d] 00-app-script.sh: executing...
[cont-init.d] 00-app-script.sh: exited 0.
[cont-init.d] 00-app-user-map.sh: executing...
[cont-init.d] 00-app-user-map.sh: exited 0.
[cont-init.d] 00-clean-logmonitor-states.sh: executing...
[cont-init.d] 00-clean-logmonitor-states.sh: exited 0.
[cont-init.d] 00-clean-tmp-dir.sh: executing...
[cont-init.d] 00-clean-tmp-dir.sh: exited 0.
[cont-init.d] 00-set-app-deps.sh: executing...
[cont-init.d] 00-set-app-deps.sh: exited 0.
[cont-init.d] 00-set-home.sh: executing...
[cont-init.d] 00-set-home.sh: exited 0.
[cont-init.d] 00-take-config-ownership.sh: executing...
[cont-init.d] 00-take-config-ownership.sh: exited 0.
[cont-init.d] 00-xdg-runtime-dir.sh: executing...
[cont-init.d] 00-xdg-runtime-dir.sh: exited 0.
[cont-init.d] 10-certs.sh: executing...
[cont-init.d] 10-certs.sh: exited 0.
[cont-init.d] 10-cjk-font.sh: executing...
[cont-init.d] 10-cjk-font.sh: exited 0.
[cont-init.d] 10-nginx.sh: executing...
[cont-init.d] 10-nginx.sh: exited 0.
[cont-init.d] 10-vnc-password.sh: executing...
[cont-init.d] 10-vnc-password.sh: exited 0.
[cont-init.d] 10-web-index.sh: executing...
[cont-init.d] 10-web-index.sh: exited 0.
[cont-init.d] filebot.sh: executing...
Enter OpenSubtitles username: Enter OpenSubtitles password: Testing OpenSubtitles... OK
Done ヾ(@⌒ー⌒@)ノ
[cont-init.d] filebot.sh: exited 0.
[cont-init.d] done.
[services.d] starting services
[services.d] starting s6-fdholderd...
[services.d] starting certsmonitor...
[services.d] starting nginx...
[services.d] starting xvfb...
[nginx] starting...
[certsmonitor] disabling service: secure connection not enabled.
[xvfb] starting...
[services.d] starting amc...
[services.d] starting logmonitor...
[services.d] starting statusmonitor...
[logmonitor] no file to monitor: disabling service...
[services.d] starting openbox...
[statusmonitor] no file to monitor: disabling service...
[openbox] starting...
[amc] Changes detected in input folder.
[amc] Waiting 10 seconds before proceeding...
[services.d] starting x11vnc...
[services.d] starting app...
[x11vnc] starting...
[app] starting FileBot...
[services.d] done.
25/12/2021 02:07:21 passing arg to libvncserver: -rfbport
25/12/2021 02:07:21 passing arg to libvncserver: 5900
25/12/2021 02:07:21 passing arg to libvncserver: -rfbportv6
25/12/2021 02:07:21 passing arg to libvncserver: -1
25/12/2021 02:07:21 passing arg to libvncserver: -httpportv6
25/12/2021 02:07:21 passing arg to libvncserver: -1
25/12/2021 02:07:21 passing arg to libvncserver: -desktop
25/12/2021 02:07:21 passing arg to libvncserver: FileBot
25/12/2021 02:07:21 x11vnc version: 0.9.14 lastmod: 2015-11-14 pid: 963
25/12/2021 02:07:21 Using X display :0
25/12/2021 02:07:21 rootwin: 0x43 reswin: 0x400001 dpy: 0xe16f29e0
25/12/2021 02:07:21
25/12/2021 02:07:21 ------------------ USEFUL INFORMATION ------------------
25/12/2021 02:07:21 X DAMAGE available on display, using it for polling hints.
25/12/2021 02:07:21 To disable this behavior use: '-noxdamage'
25/12/2021 02:07:21
25/12/2021 02:07:21 Most compositing window managers like 'compiz' or 'beryl'
25/12/2021 02:07:21 cause X DAMAGE to fail, and so you may not see any screen
25/12/2021 02:07:21 updates via VNC. Either disable 'compiz' (recommended) or
25/12/2021 02:07:21 supply the x11vnc '-noxdamage' command line option.
25/12/2021 02:07:21 X COMPOSITE available on display, using it for window polling.
25/12/2021 02:07:21 To disable this behavior use: '-noxcomposite'
25/12/2021 02:07:21
25/12/2021 02:07:21 Wireframing: -wireframe mode is in effect for window moves.
25/12/2021 02:07:21 If this yields undesired behavior (poor response, painting
25/12/2021 02:07:21 errors, etc) it may be disabled:
25/12/2021 02:07:21 - use '-nowf' to disable wireframing completely.
25/12/2021 02:07:21 - use '-nowcr' to disable the Copy Rectangle after the
25/12/2021 02:07:21 moved window is released in the new position.
25/12/2021 02:07:21 Also see the -help entry for tuning parameters.
25/12/2021 02:07:21 You can press 3 Alt_L's (Left "Alt" key) in a row to
25/12/2021 02:07:21 repaint the screen, also see the -fixscreen option for
25/12/2021 02:07:21 periodic repaints.
25/12/2021 02:07:21 GrabServer control via XTEST.
25/12/2021 02:07:21
25/12/2021 02:07:21 Scroll Detection: -scrollcopyrect mode is in effect to
25/12/2021 02:07:21 use RECORD extension to try to detect scrolling windows
25/12/2021 02:07:21 (induced by either user keystroke or mouse input).
25/12/2021 02:07:21 If this yields undesired behavior (poor response, painting
25/12/2021 02:07:21 errors, etc) it may be disabled via: '-noscr'
25/12/2021 02:07:21 Also see the -help entry for tuning parameters.
25/12/2021 02:07:21 You can press 3 Alt_L's (Left "Alt" key) in a row to
25/12/2021 02:07:21 repaint the screen, also see the -fixscreen option for
25/12/2021 02:07:21 periodic repaints.
25/12/2021 02:07:21
25/12/2021 02:07:21 XKEYBOARD: number of keysyms per keycode 7 is greater
25/12/2021 02:07:21 than 4 and 51 keysyms are mapped above 4.
25/12/2021 02:07:21 Automatically switching to -xkb mode.
25/12/2021 02:07:21 If this makes the key mapping worse you can
25/12/2021 02:07:21 disable it with the "-noxkb" option.
25/12/2021 02:07:21 Also, remember "-remap DEAD" for accenting characters.
25/12/2021 02:07:21
25/12/2021 02:07:21 X FBPM extension not supported.
Xlib: extension "DPMS" missing on display ":0".
25/12/2021 02:07:21 X display is not capable of DPMS.
25/12/2021 02:07:21 --------------------------------------------------------
25/12/2021 02:07:21
25/12/2021 02:07:21 Default visual ID: 0x21
25/12/2021 02:07:21 Read initial data from X display into framebuffer.
25/12/2021 02:07:21 initialize_screen: fb_depth/fb_bpp/fb_Bpl 24/32/7680
25/12/2021 02:07:21
25/12/2021 02:07:21 X display :0 is 32bpp depth=24 true color
25/12/2021 02:07:21
25/12/2021 02:07:21 Listening for VNC connections on TCP port 5900
25/12/2021 02:07:21
25/12/2021 02:07:21 Xinerama is present and active (e.g. multi-head).
25/12/2021 02:07:21 Xinerama: number of sub-screens: 1
25/12/2021 02:07:21 Xinerama: no blackouts needed (only one sub-screen)
25/12/2021 02:07:21
25/12/2021 02:07:21 fb read rate: 2300 MB/sec
25/12/2021 02:07:21 fast read: reset -wait ms to: 10
25/12/2021 02:07:21 fast read: reset -defer ms to: 10
25/12/2021 02:07:21 The X server says there are 10 mouse buttons.
25/12/2021 02:07:21 screen setup finished.
25/12/2021 02:07:21

The VNC desktop is: 4776ad38f83d:0

0

******************************************************************************
Have you tried the x11vnc '-ncache' VNC client-side pixel caching feature yet?

The scheme stores pixel data offscreen on the VNC viewer side for faster
retrieval. It should work with any VNC viewer. Try it by running:

x11vnc -ncache 10 ...

One can also add -ncache_cr for smooth 'copyrect' window motion.
More info: http://www.karlrunge.com/x11vnc/faq.html#faq-client-caching

FileBot 4.9.4 (r8736) JDK8
JNA Native: 5.2.2
MediaInfo: 21.03
Tools: fpcalc/1.4.3 p7zip/16.02 unrar/5.61
Extended Attributes: OK
Unicode Filesystem: OK
Script Bundle: 2021-08-02 (r761)
Groovy: 3.0.8
JRE: OpenJDK Runtime Environment 1.8.0_275
JVM: 64-bit OpenJDK 64-Bit Server VM
CPU/MEM: 8 Core / 14 GB Max Memory / 60 MB Used Memory
OS: Linux (amd64)
HW: Linux 4776ad38f83d 5.10.28-Unraid #1 SMP Wed Apr 7 08:23:18 PDT 2021 x86_64 GNU/Linux
CPU/MEM: Intel(R) Core(TM) i7-9700 CPU @ 3.00GHz [MemTotal: 67 GB | MemFree: 2.5 GB | MemAvailable: 51 GB]
STORAGE: btrfs [/] @ 91 GB | fuse.shfs [/storage] @ 13 TB | fuse.shfs [/watch] @ 220 GB | fuse.shfs [/output] @ 13 TB | fuse.shfs [/config] @ 220 GB

p
DATA: /config
Package: DOCKER
License: FileBot License PX31705185 (Valid-Until: 2071-12-15)

(process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.
Done ヾ(@⌒ー⌒@)ノ

(process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:993): dconf-CRITICAL **: 02:07:23.001: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.
Done ヾ(@⌒ー⌒@)ノ
[amc] Invoking AMC script...
[amc] ,: No Such File: /run/s6/services/amc/,
[amc] Run script [fn:amc] at [Sat Dec 25 02:07:30 CET 2021]
[amc] Parameter: artwork = y
[amc] Parameter: music = y
[amc] Parameter: clean = y
[amc] Parameter: excludeList = /config/amc-exlude-list.txt
[amc] Parameter: movieFormat = /output/Peliculas/{ny}/{ny} - {vf} - {vc} - {vcf} - {hdr} - {aco}
[amc] Parameter: musicFormat = {plex}
[amc] Parameter: seriesFormat = /output/Series/{n}/{'Season '+s}/{n} - {s00e00} - {t} - {vf} - {vc} - {vcf} - {hdr} - {aco}
[amc] Parameter: animeFormat = /output/Peliculas/{ny}/{ny} - {vf} - {vc} - {vcf} - {hdr} - {aco}
[amc] Parameter: subtitles = es
[amc] Parameter: skipExtract = n
[amc] Argument[0]: /watch
[amc] Run script [fn:amc] at [Sat Dec 25 02:07:30 CET 2021]
[amc] Parameter: artwork = y
[amc] Parameter: music = y
[amc] Parameter: clean = y
[amc] Parameter: excludeList = /config/amc-exlude-list.txt
[amc] Parameter: movieFormat = /output/Peliculas/{ny}/{ny} - {vf} - {vc} - {vcf} - {hdr} - {aco}
[amc] Parameter: musicFormat = {plex}
[amc] Parameter: seriesFormat = /output/Series/{n}/{'Season '+s}/{n} - {s00e00} - {t} - {vf} - {vc} - {vcf} - {hdr} - {aco}
[amc] Parameter: animeFormat = /output/Peliculas/{ny}/{ny} - {vf} - {vc} - {vcf} - {hdr} - {aco}
[amc] Parameter: subtitles = es
[amc] Parameter: skipExtract = n
[amc] Argument[0]: /watch
[amc] Use excludes: /config/amc-exlude-list.txt (35)
[amc] No files selected for processing
[amc] Done ¯_(ツ)_/¯

 

Theese errors appear once container is starting. Container starts witout problem, but I need to restart the container to amc scripts work.

I am also using the amc JDonloader 2 scripts.

 

Thank you in advance

 

Can you share the full config of the container, by providing the output of "docker inspect FileBot" ?  The problem may come from the value of one of the environment variable.

Link to comment
4 hours ago, mason1171 said:

BPgazbg.pngCan I get some help with streamlining my config for proper AMC moving not copying then deleting please? Docker mount points confuse me a bit 
Share Structure
/mnt/user
    ├── Downloads
    │   ├── Drop
    ├── Encode_Cache
    ├── Media
    │   ├── Movies
    │   └── Shows
    ├── Misc
    ├── Skip_Cache
    ├── appdata
    ├── domains
    ├── isos
    ├── recovery
    └── system

 

You need to make sure that you use a single mount point.  So I would add a new "Path", where you map /mnt/user to /workdir in the container.  Then set:

  • "Automated Media Center: Input Directory" --> /workdir/Downloads/Drop
  • "Automated Media Center: Movie Format" --> /workdir/media/Movies/...
  • "Automated Media Center: TV Series Format" --> /workdir/media/Shows/...
  • Like 2
Link to comment
1 minute ago, Djoss said:

 

You need to make sure that you use a single mount point.  So I would add a new "Path", where you map /mnt/user to /workdir in the container.  Then set:

  • "Automated Media Center: Input Directory" --> /workdir/Downloads/Drop
  • "Automated Media Center: Movie Format" --> /workdir/media/Movies/...
  • "Automated Media Center: TV Series Format" --> /workdir/media/Shows/...

I'll check it out. Thank you very much

Link to comment
 
You need to make sure that you use a single mount point.  So I would add a new "Path", where you map /mnt/user to /workdir in the container.  Then set:
  • "Automated Media Center: Input Directory" --> /workdir/Downloads/Drop
  • "Automated Media Center: Movie Format" --> /workdir/media/Movies/...
  • "Automated Media Center: TV Series Format" --> /workdir/media/Shows/...

Actually, im confused. What’s different between creating the workdir variable and using the storage variable?
Link to comment
1 hour ago, Grzegorz Std said:

How to disable amc-exlude-list ?

 

 

better question, why would you act like this ?

 

may as note, once you disable it a fail move wil fail over and over and over ... again without exlusion.

 

as this is a app related question, may as tipp, filebot dev is very active either in his forum and in his discord channel, may take a look there.

 

in terms you really want todo something manually, filebot has a postprocess feature, so you could manually wipe, edit, ... the amc file maybe ... but again, i wouldnt recommend it ;)

Link to comment
17 hours ago, mason1171 said:

Actually, im confused. What’s different between creating the workdir variable and using the storage variable?

 

Both will do the same thing.  If you prefer to re-use the storage setting, just make sure to change its access mode to read/write.  By default it's read-only.

Link to comment
On 1/1/2022 at 4:00 AM, Djoss said:

 

Can you share the full config of the container, by providing the output of "docker inspect FileBot" ?  The problem may come from the value of one of the environment variable.

Find below complete "docker inspect Filebot":

 

root@NASDiego:~# docker inspect FileBot
[
    {
        "Id": "ece6ad3e4dc1f4715929b484c73d380ffe8fa1be452ba4403075d13a92d10c9e",
        "Created": "2021-12-29T14:53:32.161791181Z",
        "Path": "/init",
        "Args": [],
        "State": {
            "Status": "running",
            "Running": true,
            "Paused": false,
            "Restarting": false,
            "OOMKilled": false,
            "Dead": false,
            "Pid": 24316,
            "ExitCode": 0,
            "Error": "",
            "StartedAt": "2022-01-04T06:25:47.937909308Z",
            "FinishedAt": "2022-01-04T05:49:52.026513317Z"
        },
        "Image": "sha256:7fb0bdde56aaad3942e268b1e4cd743627ebdd3801fe1df0999855cce1dc3d5d",
        "ResolvConfPath": "/var/lib/docker/containers/ece6ad3e4dc1f4715929b484c73d380ffe8fa1be452ba4403075d13a92d10c9e/resolv.conf",
        "HostnamePath": "/var/lib/docker/containers/ece6ad3e4dc1f4715929b484c73d380ffe8fa1be452ba4403075d13a92d10c9e/hostname",
        "HostsPath": "/var/lib/docker/containers/ece6ad3e4dc1f4715929b484c73d380ffe8fa1be452ba4403075d13a92d10c9e/hosts",
        "LogPath": "/var/lib/docker/containers/ece6ad3e4dc1f4715929b484c73d380ffe8fa1be452ba4403075d13a92d10c9e/ece6ad3e4dc1f4715929b484c73d380ffe8fa1be452ba4403075d13a92d10c9e-json.log",
        "Name": "/FileBot",
        "RestartCount": 0,
        "Driver": "btrfs",
        "Platform": "linux",
        "MountLabel": "",
        "ProcessLabel": "",
        "AppArmorProfile": "",
        "ExecIDs": null,
        "HostConfig": {
            "Binds": [
                "/mnt/user:/storage:rw",
                "/mnt/user/appdata/JDownloader2/Descargas/:/watch:rw",
                "/mnt/user/:/output:rw",
                "/mnt/user/appdata/FileBot:/config:rw"
            ],
            "ContainerIDFile": "",
            "LogConfig": {
                "Type": "json-file",
                "Config": {
                    "max-file": "1",
                    "max-size": "50m"
                }
            },
            "NetworkMode": "diegonas",
            "PortBindings": {
                "5800/tcp": [
                    {
                        "HostIp": "",
                        "HostPort": "5800"
                    }
                ],
                "5900/tcp": [
                    {
                        "HostIp": "",
                        "HostPort": "5900"
                    }
                ]
            },
            "RestartPolicy": {
                "Name": "no",
                "MaximumRetryCount": 0
            },
            "AutoRemove": false,
            "VolumeDriver": "",
            "VolumesFrom": null,
            "CapAdd": null,
            "CapDrop": null,
            "CgroupnsMode": "host",
            "Dns": [],
            "DnsOptions": [],
            "DnsSearch": [],
            "ExtraHosts": null,
            "GroupAdd": null,
            "IpcMode": "private",
            "Cgroup": "",
            "Links": null,
            "OomScoreAdj": 0,
            "PidMode": "",
            "Privileged": false,
            "PublishAllPorts": false,
            "ReadonlyRootfs": false,
            "SecurityOpt": null,
            "UTSMode": "",
            "UsernsMode": "",
            "ShmSize": 67108864,
            "Runtime": "runc",
            "ConsoleSize": [
                0,
                0
            ],
            "Isolation": "",
            "CpuShares": 0,
            "Memory": 0,
            "NanoCpus": 0,
            "CgroupParent": "",
            "BlkioWeight": 0,
            "BlkioWeightDevice": [],
            "BlkioDeviceReadBps": null,
            "BlkioDeviceWriteBps": null,
            "BlkioDeviceReadIOps": null,
            "BlkioDeviceWriteIOps": null,
            "CpuPeriod": 0,
            "CpuQuota": 0,
            "CpuRealtimePeriod": 0,
            "CpuRealtimeRuntime": 0,
            "CpusetCpus": "",
            "CpusetMems": "",
            "Devices": [],
            "DeviceCgroupRules": null,
            "DeviceRequests": null,
            "KernelMemory": 0,
            "KernelMemoryTCP": 0,
            "MemoryReservation": 0,
            "MemorySwap": 0,
            "MemorySwappiness": null,
            "OomKillDisable": false,
            "PidsLimit": null,
            "Ulimits": null,
            "CpuCount": 0,
            "CpuPercent": 0,
            "IOMaximumIOps": 0,
            "IOMaximumBandwidth": 0,
            "MaskedPaths": [
                "/proc/asound",
                "/proc/acpi",
                "/proc/kcore",
                "/proc/keys",
                "/proc/latency_stats",
                "/proc/timer_list",
                "/proc/timer_stats",
                "/proc/sched_debug",
                "/proc/scsi",
                "/sys/firmware"
            ],
            "ReadonlyPaths": [
                "/proc/bus",
                "/proc/fs",
                "/proc/irq",
                "/proc/sys",
                "/proc/sysrq-trigger"
            ]
        },
        "GraphDriver": {
            "Data": null,
            "Name": "btrfs"
        },
        "Mounts": [
            {
                "Type": "bind",
                "Source": "/mnt/user/appdata/JDownloader2/Descargas",
                "Destination": "/watch",
                "Mode": "rw",
                "RW": true,
                "Propagation": "rprivate"
            },
            {
                "Type": "bind",
                "Source": "/mnt/user/appdata/FileBot",
                "Destination": "/config",
                "Mode": "rw",
                "RW": true,
                "Propagation": "rprivate"
            },
            {
                "Type": "bind",
                "Source": "/mnt/user",
                "Destination": "/output",
                "Mode": "rw",
                "RW": true,
                "Propagation": "rprivate"
            },
            {
                "Type": "bind",
                "Source": "/mnt/user",
                "Destination": "/storage",
                "Mode": "rw",
                "RW": true,
                "Propagation": "rprivate"
            }
        ],
        "Config": {
            "Hostname": "ece6ad3e4dc1",
            "Domainname": "",
            "User": "",
            "AttachStdin": false,
            "AttachStdout": false,
            "AttachStderr": false,
            "ExposedPorts": {
                "5800/tcp": {},
                "5900/tcp": {}
            },
            "Tty": false,
            "OpenStdin": false,
            "StdinOnce": false,
            "Env": [
                "AMC_ANIME_FORMAT=/output/Peliculas/{ny}/{ny} - {vc} - {vcf} - {hdr} - {vf} ",
                "UMASK=000",
                "SECURE_CONNECTION=0",
                "AMC_OUTPUT_DIR=/output",
                "AMC_INTERVAL=1800",
                "AMC_INPUT_STABLE_TIME=10",
                "AMC_CONFLICT=auto",
                "AMC_MOVIE_FORMAT=/output/Peliculas/{ny.upperInitial()}/{ny.upperInitial()} - {vc} - {vcf} - {hdr} - {vf}",
                "FILEBOT_CUSTOM_OPTIONS=",
                "AMC_INSTALL_PKGS=",
                "AMC_SERIES_FORMAT=/output/Series/{n.upperInitial()}/{'Season '+s}/{n.upperInitial()} - {s00e00} - {t.upperInitial()} - {vc} - {vcf} - {hdr} - {vf}",
                "GROUP_ID=100",
                "DISPLAY_WIDTH=1920",
                "AMC_CUSTOM_OPTIONS=--def skipExtract=n , --lang es",
                "TZ=Europe/Paris",
                "AMC_MATCH_MODE=opportunistic",
                "AMC_INPUT_DIR=/watch",
                "OPENSUBTITLES_PASSWORD=**********,
                "AMC_ACTION=move",
                "AMC_SUBTITLE_LANG=es",
                "USER_ID=99",
                "OPENSUBTITLES_USERNAME=*********",
                "HOST_OS=Unraid",
                "AMC_PROCESS_MUSIC=y",
                "APP_NICENESS=",
                "X11VNC_EXTRA_OPTS=",
                "AMC_ARTWORK=y",
                "AMC_MUSIC_FORMAT={plex}",
                "DISPLAY_HEIGHT=1080",
                "PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin",
                "LANG=en_US.UTF-8",
                "S6_BEHAVIOUR_IF_STAGE2_FAILS=3",
                "S6_SERVICE_DEPS=1",
                "APP_NAME=FileBot",
                "APP_USER=app",
                "XDG_DATA_HOME=/config/xdg/data",
                "XDG_CONFIG_HOME=/config/xdg/config",
                "XDG_CACHE_HOME=/config/xdg/cache",
                "XDG_RUNTIME_DIR=/tmp/run/user/app",
                "DISPLAY=:0"
            ],
            "Cmd": [
                "/init"
            ],
            "Image": "jlesage/filebot",
            "Volumes": {
                "/config": {},
                "/output": {},
                "/storage": {},
                "/watch": {}
            },
            "WorkingDir": "/tmp",
            "Entrypoint": null,
            "OnBuild": null,
            "Labels": {
                "org.label-schema.description": "Docker container for FileBot",
                "org.label-schema.name": "filebot",
                "org.label-schema.schema-version": "1.0",
                "org.label-schema.vcs-url": "https://github.com/jlesage/docker-filebot",
                "org.label-schema.version": "1.12.0",
                "org.opencontainers.image.created": "2021-10-15T12:00:22Z",
                "org.opencontainers.image.revision": "a096c06c010fa890bc702e6ebd8ef8dd77923ceb",
                "org.opencontainers.image.source": "https://github.com/jlesage/docker-filebot.git",
                "org.opencontainers.image.url": "https://github.com/jlesage/docker-filebot"
            }
        },
        "NetworkSettings": {
            "Bridge": "",
            "SandboxID": "73764e51a93e5cdfe22cdb7b7687ebd79d2d29f9965953ea00dccc5231da4be7",
            "HairpinMode": false,
            "LinkLocalIPv6Address": "",
            "LinkLocalIPv6PrefixLen": 0,
            "Ports": {
                "5800/tcp": [
                    {
                        "HostIp": "0.0.0.0",
                        "HostPort": "5800"
                    }
                ],
                "5900/tcp": [
                    {
                        "HostIp": "0.0.0.0",
                        "HostPort": "5900"
                    }
                ]
            },
            "SandboxKey": "/var/run/docker/netns/73764e51a93e",
            "SecondaryIPAddresses": null,
            "SecondaryIPv6Addresses": null,
            "EndpointID": "",
            "Gateway": "",
            "GlobalIPv6Address": "",
            "GlobalIPv6PrefixLen": 0,
            "IPAddress": "",
            "IPPrefixLen": 0,
            "IPv6Gateway": "",
            "MacAddress": "",
            "Networks": {
                "diegonas": {
                    "IPAMConfig": null,
                    "Links": null,
                    "Aliases": [
                        "ece6ad3e4dc1"
                    ],
                    "NetworkID": "bdd804195968a41b718d7cff82229eac4ad24c0b966ba66eea3893b8e6be98bd",
                    "EndpointID": "5d27ae1a046b344bb3e4577df7cb47b419806dd647d0fa75470162960da4f686",
                    "Gateway": "172.18.0.1",
                    "IPAddress": "172.18.0.3",
                    "IPPrefixLen": 16,
                    "IPv6Gateway": "",
                    "GlobalIPv6Address": "",
                    "GlobalIPv6PrefixLen": 0,
                    "MacAddress": "02:42:ac:12:00:03",
                    "DriverOpts": null
                }
            }
        }
    }
]

 

Thank you again

Link to comment
16 hours ago, dellorianes said:

Find below complete "docker inspect Filebot":

 

root@NASDiego:~# docker inspect FileBot
[
    {
        "Id": "ece6ad3e4dc1f4715929b484c73d380ffe8fa1be452ba4403075d13a92d10c9e",
        "Created": "2021-12-29T14:53:32.161791181Z",
        "Path": "/init",
        "Args": [],
        "State": {
            "Status": "running",
            "Running": true,
            "Paused": false,
            "Restarting": false,
            "OOMKilled": false,
            "Dead": false,
            "Pid": 24316,
            "ExitCode": 0,
            "Error": "",
            "StartedAt": "2022-01-04T06:25:47.937909308Z",
            "FinishedAt": "2022-01-04T05:49:52.026513317Z"
        },
        "Image": "sha256:7fb0bdde56aaad3942e268b1e4cd743627ebdd3801fe1df0999855cce1dc3d5d",
        "ResolvConfPath": "/var/lib/docker/containers/ece6ad3e4dc1f4715929b484c73d380ffe8fa1be452ba4403075d13a92d10c9e/resolv.conf",
        "HostnamePath": "/var/lib/docker/containers/ece6ad3e4dc1f4715929b484c73d380ffe8fa1be452ba4403075d13a92d10c9e/hostname",
        "HostsPath": "/var/lib/docker/containers/ece6ad3e4dc1f4715929b484c73d380ffe8fa1be452ba4403075d13a92d10c9e/hosts",
        "LogPath": "/var/lib/docker/containers/ece6ad3e4dc1f4715929b484c73d380ffe8fa1be452ba4403075d13a92d10c9e/ece6ad3e4dc1f4715929b484c73d380ffe8fa1be452ba4403075d13a92d10c9e-json.log",
        "Name": "/FileBot",
        "RestartCount": 0,
        "Driver": "btrfs",
        "Platform": "linux",
        "MountLabel": "",
        "ProcessLabel": "",
        "AppArmorProfile": "",
        "ExecIDs": null,
        "HostConfig": {
            "Binds": [
                "/mnt/user:/storage:rw",
                "/mnt/user/appdata/JDownloader2/Descargas/:/watch:rw",
                "/mnt/user/:/output:rw",
                "/mnt/user/appdata/FileBot:/config:rw"
            ],
            "ContainerIDFile": "",
            "LogConfig": {
                "Type": "json-file",
                "Config": {
                    "max-file": "1",
                    "max-size": "50m"
                }
            },
            "NetworkMode": "diegonas",
            "PortBindings": {
                "5800/tcp": [
                    {
                        "HostIp": "",
                        "HostPort": "5800"
                    }
                ],
                "5900/tcp": [
                    {
                        "HostIp": "",
                        "HostPort": "5900"
                    }
                ]
            },
            "RestartPolicy": {
                "Name": "no",
                "MaximumRetryCount": 0
            },
            "AutoRemove": false,
            "VolumeDriver": "",
            "VolumesFrom": null,
            "CapAdd": null,
            "CapDrop": null,
            "CgroupnsMode": "host",
            "Dns": [],
            "DnsOptions": [],
            "DnsSearch": [],
            "ExtraHosts": null,
            "GroupAdd": null,
            "IpcMode": "private",
            "Cgroup": "",
            "Links": null,
            "OomScoreAdj": 0,
            "PidMode": "",
            "Privileged": false,
            "PublishAllPorts": false,
            "ReadonlyRootfs": false,
            "SecurityOpt": null,
            "UTSMode": "",
            "UsernsMode": "",
            "ShmSize": 67108864,
            "Runtime": "runc",
            "ConsoleSize": [
                0,
                0
            ],
            "Isolation": "",
            "CpuShares": 0,
            "Memory": 0,
            "NanoCpus": 0,
            "CgroupParent": "",
            "BlkioWeight": 0,
            "BlkioWeightDevice": [],
            "BlkioDeviceReadBps": null,
            "BlkioDeviceWriteBps": null,
            "BlkioDeviceReadIOps": null,
            "BlkioDeviceWriteIOps": null,
            "CpuPeriod": 0,
            "CpuQuota": 0,
            "CpuRealtimePeriod": 0,
            "CpuRealtimeRuntime": 0,
            "CpusetCpus": "",
            "CpusetMems": "",
            "Devices": [],
            "DeviceCgroupRules": null,
            "DeviceRequests": null,
            "KernelMemory": 0,
            "KernelMemoryTCP": 0,
            "MemoryReservation": 0,
            "MemorySwap": 0,
            "MemorySwappiness": null,
            "OomKillDisable": false,
            "PidsLimit": null,
            "Ulimits": null,
            "CpuCount": 0,
            "CpuPercent": 0,
            "IOMaximumIOps": 0,
            "IOMaximumBandwidth": 0,
            "MaskedPaths": [
                "/proc/asound",
                "/proc/acpi",
                "/proc/kcore",
                "/proc/keys",
                "/proc/latency_stats",
                "/proc/timer_list",
                "/proc/timer_stats",
                "/proc/sched_debug",
                "/proc/scsi",
                "/sys/firmware"
            ],
            "ReadonlyPaths": [
                "/proc/bus",
                "/proc/fs",
                "/proc/irq",
                "/proc/sys",
                "/proc/sysrq-trigger"
            ]
        },
        "GraphDriver": {
            "Data": null,
            "Name": "btrfs"
        },
        "Mounts": [
            {
                "Type": "bind",
                "Source": "/mnt/user/appdata/JDownloader2/Descargas",
                "Destination": "/watch",
                "Mode": "rw",
                "RW": true,
                "Propagation": "rprivate"
            },
            {
                "Type": "bind",
                "Source": "/mnt/user/appdata/FileBot",
                "Destination": "/config",
                "Mode": "rw",
                "RW": true,
                "Propagation": "rprivate"
            },
            {
                "Type": "bind",
                "Source": "/mnt/user",
                "Destination": "/output",
                "Mode": "rw",
                "RW": true,
                "Propagation": "rprivate"
            },
            {
                "Type": "bind",
                "Source": "/mnt/user",
                "Destination": "/storage",
                "Mode": "rw",
                "RW": true,
                "Propagation": "rprivate"
            }
        ],
        "Config": {
            "Hostname": "ece6ad3e4dc1",
            "Domainname": "",
            "User": "",
            "AttachStdin": false,
            "AttachStdout": false,
            "AttachStderr": false,
            "ExposedPorts": {
                "5800/tcp": {},
                "5900/tcp": {}
            },
            "Tty": false,
            "OpenStdin": false,
            "StdinOnce": false,
            "Env": [
                "AMC_ANIME_FORMAT=/output/Peliculas/{ny}/{ny} - {vc} - {vcf} - {hdr} - {vf} ",
                "UMASK=000",
                "SECURE_CONNECTION=0",
                "AMC_OUTPUT_DIR=/output",
                "AMC_INTERVAL=1800",
                "AMC_INPUT_STABLE_TIME=10",
                "AMC_CONFLICT=auto",
                "AMC_MOVIE_FORMAT=/output/Peliculas/{ny.upperInitial()}/{ny.upperInitial()} - {vc} - {vcf} - {hdr} - {vf}",
                "FILEBOT_CUSTOM_OPTIONS=",
                "AMC_INSTALL_PKGS=",
                "AMC_SERIES_FORMAT=/output/Series/{n.upperInitial()}/{'Season '+s}/{n.upperInitial()} - {s00e00} - {t.upperInitial()} - {vc} - {vcf} - {hdr} - {vf}",
                "GROUP_ID=100",
                "DISPLAY_WIDTH=1920",
                "AMC_CUSTOM_OPTIONS=--def skipExtract=n , --lang es",
                "TZ=Europe/Paris",
                "AMC_MATCH_MODE=opportunistic",
                "AMC_INPUT_DIR=/watch",
                "OPENSUBTITLES_PASSWORD=**********,
                "AMC_ACTION=move",
                "AMC_SUBTITLE_LANG=es",
                "USER_ID=99",
                "OPENSUBTITLES_USERNAME=*********",
                "HOST_OS=Unraid",
                "AMC_PROCESS_MUSIC=y",
                "APP_NICENESS=",
                "X11VNC_EXTRA_OPTS=",
                "AMC_ARTWORK=y",
                "AMC_MUSIC_FORMAT={plex}",
                "DISPLAY_HEIGHT=1080",
                "PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin",
                "LANG=en_US.UTF-8",
                "S6_BEHAVIOUR_IF_STAGE2_FAILS=3",
                "S6_SERVICE_DEPS=1",
                "APP_NAME=FileBot",
                "APP_USER=app",
                "XDG_DATA_HOME=/config/xdg/data",
                "XDG_CONFIG_HOME=/config/xdg/config",
                "XDG_CACHE_HOME=/config/xdg/cache",
                "XDG_RUNTIME_DIR=/tmp/run/user/app",
                "DISPLAY=:0"
            ],
            "Cmd": [
                "/init"
            ],
            "Image": "jlesage/filebot",
            "Volumes": {
                "/config": {},
                "/output": {},
                "/storage": {},
                "/watch": {}
            },
            "WorkingDir": "/tmp",
            "Entrypoint": null,
            "OnBuild": null,
            "Labels": {
                "org.label-schema.description": "Docker container for FileBot",
                "org.label-schema.name": "filebot",
                "org.label-schema.schema-version": "1.0",
                "org.label-schema.vcs-url": "https://github.com/jlesage/docker-filebot",
                "org.label-schema.version": "1.12.0",
                "org.opencontainers.image.created": "2021-10-15T12:00:22Z",
                "org.opencontainers.image.revision": "a096c06c010fa890bc702e6ebd8ef8dd77923ceb",
                "org.opencontainers.image.source": "https://github.com/jlesage/docker-filebot.git",
                "org.opencontainers.image.url": "https://github.com/jlesage/docker-filebot"
            }
        },
        "NetworkSettings": {
            "Bridge": "",
            "SandboxID": "73764e51a93e5cdfe22cdb7b7687ebd79d2d29f9965953ea00dccc5231da4be7",
            "HairpinMode": false,
            "LinkLocalIPv6Address": "",
            "LinkLocalIPv6PrefixLen": 0,
            "Ports": {
                "5800/tcp": [
                    {
                        "HostIp": "0.0.0.0",
                        "HostPort": "5800"
                    }
                ],
                "5900/tcp": [
                    {
                        "HostIp": "0.0.0.0",
                        "HostPort": "5900"
                    }
                ]
            },
            "SandboxKey": "/var/run/docker/netns/73764e51a93e",
            "SecondaryIPAddresses": null,
            "SecondaryIPv6Addresses": null,
            "EndpointID": "",
            "Gateway": "",
            "GlobalIPv6Address": "",
            "GlobalIPv6PrefixLen": 0,
            "IPAddress": "",
            "IPPrefixLen": 0,
            "IPv6Gateway": "",
            "MacAddress": "",
            "Networks": {
                "diegonas": {
                    "IPAMConfig": null,
                    "Links": null,
                    "Aliases": [
                        "ece6ad3e4dc1"
                    ],
                    "NetworkID": "bdd804195968a41b718d7cff82229eac4ad24c0b966ba66eea3893b8e6be98bd",
                    "EndpointID": "5d27ae1a046b344bb3e4577df7cb47b419806dd647d0fa75470162960da4f686",
                    "Gateway": "172.18.0.1",
                    "IPAddress": "172.18.0.3",
                    "IPPrefixLen": 16,
                    "IPv6Gateway": "",
                    "GlobalIPv6Address": "",
                    "GlobalIPv6PrefixLen": 0,
                    "MacAddress": "02:42:ac:12:00:03",
                    "DriverOpts": null
                }
            }
        }
    }
]

 

Thank you again

Can you try to remove the comma from your AMC_CUSTOM_OPTIONS, like this:

--def skipExtract=n --lang es

 

Link to comment
On 1/5/2022 at 2:16 AM, Djoss said:

Can you try to remove the comma from your AMC_CUSTOM_OPTIONS, like this:

--def skipExtract=n --lang es

 

Removing "comma", continues the same.

 

As posted before, this error ((process:993): dconf-CRITICAL) dessapears if I change the ID and group to root (0).

The problem then is that Filebot UI does not work (with root ID).

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.