cogliostro Posted November 18, 2018 Share Posted November 18, 2018 i always getting an ERR_CONNECTION_REFUSED error when i try to open the GUI Quote Link to comment
Squid Posted November 18, 2018 Share Posted November 18, 2018 3 hours ago, cogliostro said: i always getting an ERR_CONNECTION_REFUSED error when i try to open the GUI https://forums.unraid.net/topic/57181-real-docker-faq/#comment-564345 Quote Link to comment
xthursdayx Posted November 27, 2018 Share Posted November 27, 2018 For some reason my files aren't appearing in Filebot and when I open the GUI the server is shown as offline with the error message "Server disconnected (code:1006)" Any ideas? I've copied the container's log below: 27/11/2018 10:58:15 passing arg to libvncserver: -desktop 27/11/2018 10:58:15 passing arg to libvncserver: FileBot 27/11/2018 10:58:15 x11vnc version: 0.9.14 lastmod: 2015-11-14 pid: 798 27/11/2018 10:58:16 Using X display :0 27/11/2018 10:58:16 rootwin: 0x43 reswin: 0x400001 dpy: 0xd500ea00 27/11/2018 10:58:16 27/11/2018 10:58:16 ------------------ USEFUL INFORMATION ------------------ 27/11/2018 10:58:16 X DAMAGE available on display, using it for polling hints. 27/11/2018 10:58:16 To disable this behavior use: '-noxdamage' 27/11/2018 10:58:16 27/11/2018 10:58:16 Most compositing window managers like 'compiz' or 'beryl' 27/11/2018 10:58:16 cause X DAMAGE to fail, and so you may not see any screen 27/11/2018 10:58:16 updates via VNC. Either disable 'compiz' (recommended) or 27/11/2018 10:58:16 supply the x11vnc '-noxdamage' command line option. 27/11/2018 10:58:16 X COMPOSITE available on display, using it for window polling. 27/11/2018 10:58:16 To disable this behavior use: '-noxcomposite' 27/11/2018 10:58:16 27/11/2018 10:58:16 Wireframing: -wireframe mode is in effect for window moves. 27/11/2018 10:58:16 If this yields undesired behavior (poor response, painting 27/11/2018 10:58:16 errors, etc) it may be disabled: 27/11/2018 10:58:16 - use '-nowf' to disable wireframing completely. 27/11/2018 10:58:16 - use '-nowcr' to disable the Copy Rectangle after the 27/11/2018 10:58:16 moved window is released in the new position. 27/11/2018 10:58:16 Also see the -help entry for tuning parameters. 27/11/2018 10:58:16 You can press 3 Alt_L's (Left "Alt" key) in a row to 27/11/2018 10:58:16 repaint the screen, also see the -fixscreen option for 27/11/2018 10:58:16 periodic repaints. 27/11/2018 10:58:16 GrabServer control via XTEST. 27/11/2018 10:58:16 27/11/2018 10:58:16 Scroll Detection: -scrollcopyrect mode is in effect to 27/11/2018 10:58:16 use RECORD extension to try to detect scrolling windows 27/11/2018 10:58:16 (induced by either user keystroke or mouse input). 27/11/2018 10:58:16 If this yields undesired behavior (poor response, painting 27/11/2018 10:58:16 errors, etc) it may be disabled via: '-noscr' 27/11/2018 10:58:16 Also see the -help entry for tuning parameters. 27/11/2018 10:58:16 You can press 3 Alt_L's (Left "Alt" key) in a row to 27/11/2018 10:58:16 repaint the screen, also see the -fixscreen option for 27/11/2018 10:58:16 periodic repaints. 27/11/2018 10:58:16 27/11/2018 10:58:16 XKEYBOARD: number of keysyms per keycode 7 is greater 27/11/2018 10:58:16 than 4 and 51 keysyms are mapped above 4. 27/11/2018 10:58:16 Automatically switching to -xkb mode. 27/11/2018 10:58:16 If this makes the key mapping worse you can 27/11/2018 10:58:16 disable it with the "-noxkb" option. 27/11/2018 10:58:16 Also, remember "-remap DEAD" for accenting characters. 27/11/2018 10:58:16 27/11/2018 10:58:16 X FBPM extension not supported. 27/11/2018 10:58:16 X display is not capable of DPMS. 27/11/2018 10:58:16 -------------------------------------------------------- 27/11/2018 10:58:16 27/11/2018 10:58:16 Default visual ID: 0x21 27/11/2018 10:58:16 Read initial data from X display into framebuffer. 27/11/2018 10:58:16 initialize_screen: fb_depth/fb_bpp/fb_Bpl 24/32/5120 27/11/2018 10:58:16 27/11/2018 10:58:16 X display :0 is 32bpp depth=24 true color 27/11/2018 10:58:16 27/11/2018 10:58:16 Listening for VNC connections on TCP port 5900 27/11/2018 10:58:16 27/11/2018 10:58:16 Xinerama is present and active (e.g. multi-head). 27/11/2018 10:58:16 Xinerama: number of sub-screens: 1 27/11/2018 10:58:16 Xinerama: no blackouts needed (only one sub-screen) 27/11/2018 10:58:16 27/11/2018 10:58:16 fb read rate: 581 MB/sec 27/11/2018 10:58:16 fast read: reset -wait ms to: 10 27/11/2018 10:58:16 fast read: reset -defer ms to: 10 27/11/2018 10:58:16 The X server says there are 10 mouse buttons. 27/11/2018 10:58:16 screen setup finished. 27/11/2018 10:58:16 The VNC desktop is: 30a010d29ec4:0 0 ****************************************************************************** Have you tried the x11vnc '-ncache' VNC client-side pixel caching feature yet? The scheme stores pixel data offscreen on the VNC viewer side for faster retrieval. It should work with any VNC viewer. Try it by running: x11vnc -ncache 10 ... One can also add -ncache_cr for smooth 'copyrect' window motion. More info: http://www.karlrunge.com/x11vnc/faq.html#faq-client-caching [services.d] starting app... [services.d] done. [app] starting FileBot... FileBot 4.8.4 (r5846) JNA Native: 5.2.0 MediaInfo: 18.05 Apache Commons VFS: [zip, rar] Chromaprint: 1.4.3 Extended Attributes: OK Unicode Filesystem: OK Script Bundle: 2018-10-05 (r536) Groovy: 2.5.1 JRE: OpenJDK Runtime Environment 1.8.0_171 JVM: 64-bit OpenJDK 64-Bit Server VM CPU/MEM: 8 Core / 3 GB Max Memory / 29 MB Used Memory OS: Linux (amd64) HW: Linux 30a010d29ec4 4.18.17-unRAID #1 SMP Sun Nov 4 08:16:44 PST 2018 x86_64 Linux DATA: /config Package: DOCKER License: UNREGISTERED Done ヾ(@⌒ー⌒@)ノ Prism pipeline init order: sw Using java-based Pisces rasterizer Using dirty region optimizations Not using texture mask for primitives Not forcing power of 2 sizes for textures Using hardware CLAMP_TO_ZERO mode Opting in for HiDPI pixel scaling *** Fallback to Prism SW pipeline Prism pipeline name = com.sun.prism.sw.SWPipeline (X) Got class = class com.sun.prism.sw.SWPipeline Initialized prism pipeline: com.sun.prism.sw.SWPipeline vsync: true vpipe: false 27/11/2018 11:09:47 Got connection from client 127.0.0.1 27/11/2018 11:09:47 other clients: 27/11/2018 11:09:47 Got 'ws' WebSockets handshake 27/11/2018 11:09:47 Got protocol: binary 27/11/2018 11:09:47 - webSocketsHandshake: using binary/raw encoding 27/11/2018 11:09:47 - WebSockets client version hybi-13 27/11/2018 11:09:47 Disabled X server key autorepeat. 27/11/2018 11:09:47 to force back on run: 'xset r on' (3 times) 27/11/2018 11:09:47 incr accepted_client=1 for 127.0.0.1:46570 sock=10 27/11/2018 11:09:47 webSocketsDecodeHybi: got frame without mask 27/11/2018 11:09:47 rfbProcessClientProtocolVersion: read: I/O error Quote Link to comment
Djoss Posted November 28, 2018 Author Share Posted November 28, 2018 18 hours ago, zandrsn said: For some reason my files aren't appearing in Filebot and when I open the GUI the server is shown as offline with the error message "Server disconnected (code:1006)" Any ideas? I've copied the container's log below: 27/11/2018 10:58:15 passing arg to libvncserver: -desktop 27/11/2018 10:58:15 passing arg to libvncserver: FileBot 27/11/2018 10:58:15 x11vnc version: 0.9.14 lastmod: 2015-11-14 pid: 798 27/11/2018 10:58:16 Using X display :0 27/11/2018 10:58:16 rootwin: 0x43 reswin: 0x400001 dpy: 0xd500ea00 27/11/2018 10:58:16 27/11/2018 10:58:16 ------------------ USEFUL INFORMATION ------------------ 27/11/2018 10:58:16 X DAMAGE available on display, using it for polling hints. 27/11/2018 10:58:16 To disable this behavior use: '-noxdamage' 27/11/2018 10:58:16 27/11/2018 10:58:16 Most compositing window managers like 'compiz' or 'beryl' 27/11/2018 10:58:16 cause X DAMAGE to fail, and so you may not see any screen 27/11/2018 10:58:16 updates via VNC. Either disable 'compiz' (recommended) or 27/11/2018 10:58:16 supply the x11vnc '-noxdamage' command line option. 27/11/2018 10:58:16 X COMPOSITE available on display, using it for window polling. 27/11/2018 10:58:16 To disable this behavior use: '-noxcomposite' 27/11/2018 10:58:16 27/11/2018 10:58:16 Wireframing: -wireframe mode is in effect for window moves. 27/11/2018 10:58:16 If this yields undesired behavior (poor response, painting 27/11/2018 10:58:16 errors, etc) it may be disabled: 27/11/2018 10:58:16 - use '-nowf' to disable wireframing completely. 27/11/2018 10:58:16 - use '-nowcr' to disable the Copy Rectangle after the 27/11/2018 10:58:16 moved window is released in the new position. 27/11/2018 10:58:16 Also see the -help entry for tuning parameters. 27/11/2018 10:58:16 You can press 3 Alt_L's (Left "Alt" key) in a row to 27/11/2018 10:58:16 repaint the screen, also see the -fixscreen option for 27/11/2018 10:58:16 periodic repaints. 27/11/2018 10:58:16 GrabServer control via XTEST. 27/11/2018 10:58:16 27/11/2018 10:58:16 Scroll Detection: -scrollcopyrect mode is in effect to 27/11/2018 10:58:16 use RECORD extension to try to detect scrolling windows 27/11/2018 10:58:16 (induced by either user keystroke or mouse input). 27/11/2018 10:58:16 If this yields undesired behavior (poor response, painting 27/11/2018 10:58:16 errors, etc) it may be disabled via: '-noscr' 27/11/2018 10:58:16 Also see the -help entry for tuning parameters. 27/11/2018 10:58:16 You can press 3 Alt_L's (Left "Alt" key) in a row to 27/11/2018 10:58:16 repaint the screen, also see the -fixscreen option for 27/11/2018 10:58:16 periodic repaints. 27/11/2018 10:58:16 27/11/2018 10:58:16 XKEYBOARD: number of keysyms per keycode 7 is greater 27/11/2018 10:58:16 than 4 and 51 keysyms are mapped above 4. 27/11/2018 10:58:16 Automatically switching to -xkb mode. 27/11/2018 10:58:16 If this makes the key mapping worse you can 27/11/2018 10:58:16 disable it with the "-noxkb" option. 27/11/2018 10:58:16 Also, remember "-remap DEAD" for accenting characters. 27/11/2018 10:58:16 27/11/2018 10:58:16 X FBPM extension not supported. 27/11/2018 10:58:16 X display is not capable of DPMS. 27/11/2018 10:58:16 -------------------------------------------------------- 27/11/2018 10:58:16 27/11/2018 10:58:16 Default visual ID: 0x21 27/11/2018 10:58:16 Read initial data from X display into framebuffer. 27/11/2018 10:58:16 initialize_screen: fb_depth/fb_bpp/fb_Bpl 24/32/5120 27/11/2018 10:58:16 27/11/2018 10:58:16 X display :0 is 32bpp depth=24 true color 27/11/2018 10:58:16 27/11/2018 10:58:16 Listening for VNC connections on TCP port 5900 27/11/2018 10:58:16 27/11/2018 10:58:16 Xinerama is present and active (e.g. multi-head). 27/11/2018 10:58:16 Xinerama: number of sub-screens: 1 27/11/2018 10:58:16 Xinerama: no blackouts needed (only one sub-screen) 27/11/2018 10:58:16 27/11/2018 10:58:16 fb read rate: 581 MB/sec 27/11/2018 10:58:16 fast read: reset -wait ms to: 10 27/11/2018 10:58:16 fast read: reset -defer ms to: 10 27/11/2018 10:58:16 The X server says there are 10 mouse buttons. 27/11/2018 10:58:16 screen setup finished. 27/11/2018 10:58:16 The VNC desktop is: 30a010d29ec4:0 0 ****************************************************************************** Have you tried the x11vnc '-ncache' VNC client-side pixel caching feature yet? The scheme stores pixel data offscreen on the VNC viewer side for faster retrieval. It should work with any VNC viewer. Try it by running: x11vnc -ncache 10 ... One can also add -ncache_cr for smooth 'copyrect' window motion. More info: http://www.karlrunge.com/x11vnc/faq.html#faq-client-caching [services.d] starting app... [services.d] done. [app] starting FileBot... FileBot 4.8.4 (r5846) JNA Native: 5.2.0 MediaInfo: 18.05 Apache Commons VFS: [zip, rar] Chromaprint: 1.4.3 Extended Attributes: OK Unicode Filesystem: OK Script Bundle: 2018-10-05 (r536) Groovy: 2.5.1 JRE: OpenJDK Runtime Environment 1.8.0_171 JVM: 64-bit OpenJDK 64-Bit Server VM CPU/MEM: 8 Core / 3 GB Max Memory / 29 MB Used Memory OS: Linux (amd64) HW: Linux 30a010d29ec4 4.18.17-unRAID #1 SMP Sun Nov 4 08:16:44 PST 2018 x86_64 Linux DATA: /config Package: DOCKER License: UNREGISTERED Done ヾ(@⌒ー⌒@)ノ Prism pipeline init order: sw Using java-based Pisces rasterizer Using dirty region optimizations Not using texture mask for primitives Not forcing power of 2 sizes for textures Using hardware CLAMP_TO_ZERO mode Opting in for HiDPI pixel scaling *** Fallback to Prism SW pipeline Prism pipeline name = com.sun.prism.sw.SWPipeline (X) Got class = class com.sun.prism.sw.SWPipeline Initialized prism pipeline: com.sun.prism.sw.SWPipeline vsync: true vpipe: false 27/11/2018 11:09:47 Got connection from client 127.0.0.1 27/11/2018 11:09:47 other clients: 27/11/2018 11:09:47 Got 'ws' WebSockets handshake 27/11/2018 11:09:47 Got protocol: binary 27/11/2018 11:09:47 - webSocketsHandshake: using binary/raw encoding 27/11/2018 11:09:47 - WebSockets client version hybi-13 27/11/2018 11:09:47 Disabled X server key autorepeat. 27/11/2018 11:09:47 to force back on run: 'xset r on' (3 times) 27/11/2018 11:09:47 incr accepted_client=1 for 127.0.0.1:46570 sock=10 27/11/2018 11:09:47 webSocketsDecodeHybi: got frame without mask 27/11/2018 11:09:47 rfbProcessClientProtocolVersion: read: I/O error Can you try to clear your browser's cache? 1 Quote Link to comment
Djoss Posted December 5, 2018 Author Share Posted December 5, 2018 9 hours ago, scubieman said: The gui wont come up. http://192.168.5.180:8085/#/client/c/Filebot Had to go with port 8085 cause 8080 was used Wrong thread! For coppit's container, you should post your issue here: https://forums.lime-technology.com/topic/38720-filebot-containers/ Quote Link to comment
scubieman Posted December 5, 2018 Share Posted December 5, 2018 (edited) 2 hours ago, Djoss said: Wrong thread! For coppit's container, you should post your issue here: https://forums.lime-technology.com/topic/38720-filebot-containers/ Sorry. I deleted that. Edited December 5, 2018 by scubieman Quote Link to comment
RED-404 Posted January 5, 2019 Share Posted January 5, 2019 I don't know if I missed it, but is there a way to make the load button default to /storage/Downloads instead of /config Quote Link to comment
Djoss Posted January 6, 2019 Author Share Posted January 6, 2019 22 hours ago, RED-404 said: I don't know if I missed it, but is there a way to make the load button default to /storage/Downloads instead of /config The default could definitely be changed to "/storage" instead of "/config" and this would make more sense. But once you open a location, it should remember it next time. Quote Link to comment
Truk.22 Posted January 28, 2019 Share Posted January 28, 2019 Thanks for the great docker. I am pretty new to unraid and everything is very foreign. I have everything installed including the license and the gui portion of the program works however I do not fully understand how to run the command line side of filebot. This is the script that I want to run: filebot -script fn:amc --action move -non-strict "/storage/media/plex data/downloadtemp/media/" --conflict skip -non-strict --log-file amc.log --def movieFormat="/storage/media/movies/{ny}/{ny}" --def seriesFormat="/storage/media/tv/{n}/{'Season '+s}/{n} - {s00e00} - {t}" --def unsorted=y music=n artwork=n --def clean=y --def excludeList=/config/amc-exclude-list.txt --def deleteAfterExtract=y I just do not know where to put it and how to run it. I have a user script that runs rclone to move files from an ftp server and I would like to run this script on move completion. I do not mind if it runs all the time as long it does not try to process half downloaded files. Thank you in advance for any help. Quote Link to comment
scubieman Posted January 28, 2019 Share Posted January 28, 2019 6 hours ago, Truk.22 said: Thanks for the great docker. I am pretty new to unraid and everything is very foreign. I have everything installed including the license and the gui portion of the program works however I do not fully understand how to run the command line side of filebot. This is the script that I want to run: filebot -script fn:amc --action move -non-strict "/storage/media/plex data/downloadtemp/media/" --conflict skip -non-strict --log-file amc.log --def movieFormat="/storage/media/movies/{ny}/{ny}" --def seriesFormat="/storage/media/tv/{n}/{'Season '+s}/{n} - {s00e00} - {t}" --def unsorted=y music=n artwork=n --def clean=y --def excludeList=/config/amc-exclude-list.txt --def deleteAfterExtract=y I just do not know where to put it and how to run it. I have a user script that runs rclone to move files from an ftp server and I would like to run this script on move completion. I do not mind if it runs all the time as long it does not try to process half downloaded files. Thank you in advance for any help. This is the one I got working. This one is based of shell. Quote Link to comment
Djoss Posted January 28, 2019 Author Share Posted January 28, 2019 7 hours ago, Truk.22 said: Thanks for the great docker. I am pretty new to unraid and everything is very foreign. I have everything installed including the license and the gui portion of the program works however I do not fully understand how to run the command line side of filebot. This is the script that I want to run: filebot -script fn:amc --action move -non-strict "/storage/media/plex data/downloadtemp/media/" --conflict skip -non-strict --log-file amc.log --def movieFormat="/storage/media/movies/{ny}/{ny}" --def seriesFormat="/storage/media/tv/{n}/{'Season '+s}/{n} - {s00e00} - {t}" --def unsorted=y music=n artwork=n --def clean=y --def excludeList=/config/amc-exclude-list.txt --def deleteAfterExtract=y I just do not know where to put it and how to run it. I have a user script that runs rclone to move files from an ftp server and I would like to run this script on move completion. I do not mind if it runs all the time as long it does not try to process half downloaded files. Thank you in advance for any help. Just add "docker exec FileBot" before your command: docker exec FileBot /opt/filebot/filebot -script fn:amc --action move -non-strict "/storage/media/plex data/downloadtemp/media/" --conflict skip -non-strict --log-file amc.log --def movieFormat="/storage/media/movies/{ny}/{ny}" --def seriesFormat="/storage/media/tv/{n}/{'Season '+s}/{n} - {s00e00} - {t}" --def unsorted=y music=n artwork=n --def clean=y --def excludeList=/config/amc-exclude-list.txt --def deleteAfterExtract=y 1 Quote Link to comment
Truk.22 Posted January 28, 2019 Share Posted January 28, 2019 5 hours ago, Djoss said: Just add "docker exec FileBot" before your command: docker exec FileBot /opt/filebot/filebot -script fn:amc --action move -non-strict "/storage/media/plex data/downloadtemp/media/" --conflict skip -non-strict --log-file amc.log --def movieFormat="/storage/media/movies/{ny}/{ny}" --def seriesFormat="/storage/media/tv/{n}/{'Season '+s}/{n} - {s00e00} - {t}" --def unsorted=y music=n artwork=n --def clean=y --def excludeList=/config/amc-exclude-list.txt --def deleteAfterExtract=y Thank you very much, works perfectly Quote Link to comment
Truk.22 Posted January 28, 2019 Share Posted January 28, 2019 Now on to something more fancy! I tried running a script that was essentially: rclone move ftp to local & docker exec filebot. Although it did work, the filebot script ran first or they both ran at the same time. Is there a way to make the filebot script wait for rclone to finish? Thanks again, I owe you a beer Djoss! Quote Link to comment
Djoss Posted January 29, 2019 Author Share Posted January 29, 2019 3 hours ago, Truk.22 said: Now on to something more fancy! I tried running a script that was essentially: rclone move ftp to local & docker exec filebot. Although it did work, the filebot script ran first or they both ran at the same time. Is there a way to make the filebot script wait for rclone to finish? Thanks again, I owe you a beer Djoss! You need to use "&&" between your commands: rclone move ftp to local && docker exec filebot Quote Link to comment
Truk.22 Posted January 31, 2019 Share Posted January 31, 2019 Thanks for that Djoss, everything is working on that side. Another little issue has popped up though. Any file moved by Filebot has been giving ownership and group root root instead of users and I am unable to manipulate the file through windows shares. Do you know how I would fix that both retrospective and prospective? Thanks once again Quote Link to comment
Truk.22 Posted January 31, 2019 Share Posted January 31, 2019 On further investigation, it is rclone setting the user and group ids, not filebot. Will have to try and fix it there. Quote Link to comment
alturismo Posted February 6, 2019 Share Posted February 6, 2019 may a question, do i read this correctly that this docker does not run automatically and watch the directory for changes etc ... needs to be manually triggered ? Quote Link to comment
Djoss Posted February 6, 2019 Author Share Posted February 6, 2019 1 hour ago, alturismo said: may a question, do i read this correctly that this docker does not run automatically and watch the directory for changes etc ... needs to be manually triggered ? Correct. Currently, you need to use the UI. Quote Link to comment
alturismo Posted February 6, 2019 Share Posted February 6, 2019 ok, thanks for the info. Quote Link to comment
cybrnook Posted February 22, 2019 Share Posted February 22, 2019 (edited) Java Java Java Java Java Java Java Java Java Java Java Java Java Java Java Java 🙂 @Djoss Getting this when trying to do even a single episode fetch and rename: [services.d] starting app... [app] starting FileBot... [services.d] done. FileBot 4.8.4 (r5846) JNA Native: 5.2.0 MediaInfo: 18.05 Apache Commons VFS: [zip, rar] Chromaprint: 1.4.3 Extended Attributes: OK Unicode Filesystem: OK Script Bundle: 2019-02-20 (r548) Groovy: 2.5.1 JRE: OpenJDK Runtime Environment 1.8.0_181 JVM: 64-bit OpenJDK 64-Bit Server VM CPU/MEM: 0 Core / 15 GB Max Memory / 53 MB Used Memory OS: Linux (amd64) HW: Linux 140206e3df26 4.19.23-Unraid #1 SMP Fri Feb 15 10:41:44 PST 2019 x86_64 Linux DATA: /config Package: DOCKER License: FileBot License JAVAJAVAJAVA (Valid-Until: 2019-07-30) Done ヾ(@⌒ー⌒@)ノ Prism pipeline init order: sw Using java-based Pisces rasterizer Using dirty region optimizations Not using texture mask for primitives Not forcing power of 2 sizes for textures Using hardware CLAMP_TO_ZERO mode Opting in for HiDPI pixel scaling *** Fallback to Prism SW pipeline Prism pipeline name = com.sun.prism.sw.SWPipeline (X) Got class = class com.sun.prism.sw.SWPipeline Initialized prism pipeline: com.sun.prism.sw.SWPipeline vsync: true vpipe: false 22/02/2019 08:35:16 client 1 network rate 1240.4 KB/sec (139270.1 eff KB/sec) 22/02/2019 08:35:16 client 1 latency: 0.5 ms 22/02/2019 08:35:16 dt1: 0.0059, dt2: 0.0226 dt3: 0.0005 bytes: 35027 22/02/2019 08:35:16 link_rate: LR_LAN - 1 ms, 1240 KB/s 22/02/2019 08:35:16 copy_tiles: allocating first_line at size 41 22/02/2019 08:35:19 created selwin: 0x20002d 22/02/2019 08:35:19 called initialize_xfixes() IllegalArgumentException java.util.concurrent.ExecutionException: java.lang.IllegalArgumentException at net.filebot.ui.rename.RenamePanel$AutoCompleteAction$1.done(RenamePanel.java:936) Caused by: java.lang.IllegalArgumentException at net.filebot.ui.rename.EpisodeListMatcher.match(EpisodeListMatcher.java:85) at net.filebot.ui.rename.RenamePanel$AutoCompleteAction$1.doInBackground(RenamePanel.java:921) at net.filebot.ui.rename.RenamePanel$AutoCompleteAction$1.doInBackground(RenamePanel.java:917) So checked the usual suspect, and found: /tmp # which java /usr/bin/java /tmp # cd /usr/bin /usr/bin # ldd java /lib/ld-musl-x86_64.so.1 (0x14b8fee8b000) Error loading shared library libjli.so: No such file or directory (needed by java) libc.musl-x86_64.so.1 => /lib/ld-musl-x86_64.so.1 (0x14b8fee8b000) Error relocating java: JLI_Launch: symbol not found /usr/bin # EDIT: ALSO!!! Beta 4.8.5 is out 🙂 https://www.filebot.net/forums/viewtopic.php?t=9535 Edited February 22, 2019 by cybrnook Quote Link to comment
Djoss Posted February 24, 2019 Author Share Posted February 24, 2019 On 2/22/2019 at 8:40 AM, cybrnook said: Java Java Java Java Java Java Java Java Java Java Java Java Java Java Java Java 🙂 @Djoss Getting this when trying to do even a single episode fetch and rename: [services.d] starting app... [app] starting FileBot... [services.d] done. FileBot 4.8.4 (r5846) JNA Native: 5.2.0 MediaInfo: 18.05 Apache Commons VFS: [zip, rar] Chromaprint: 1.4.3 Extended Attributes: OK Unicode Filesystem: OK Script Bundle: 2019-02-20 (r548) Groovy: 2.5.1 JRE: OpenJDK Runtime Environment 1.8.0_181 JVM: 64-bit OpenJDK 64-Bit Server VM CPU/MEM: 0 Core / 15 GB Max Memory / 53 MB Used Memory OS: Linux (amd64) HW: Linux 140206e3df26 4.19.23-Unraid #1 SMP Fri Feb 15 10:41:44 PST 2019 x86_64 Linux DATA: /config Package: DOCKER License: FileBot License JAVAJAVAJAVA (Valid-Until: 2019-07-30) Done ヾ(@⌒ー⌒@)ノ Prism pipeline init order: sw Using java-based Pisces rasterizer Using dirty region optimizations Not using texture mask for primitives Not forcing power of 2 sizes for textures Using hardware CLAMP_TO_ZERO mode Opting in for HiDPI pixel scaling *** Fallback to Prism SW pipeline Prism pipeline name = com.sun.prism.sw.SWPipeline (X) Got class = class com.sun.prism.sw.SWPipeline Initialized prism pipeline: com.sun.prism.sw.SWPipeline vsync: true vpipe: false 22/02/2019 08:35:16 client 1 network rate 1240.4 KB/sec (139270.1 eff KB/sec) 22/02/2019 08:35:16 client 1 latency: 0.5 ms 22/02/2019 08:35:16 dt1: 0.0059, dt2: 0.0226 dt3: 0.0005 bytes: 35027 22/02/2019 08:35:16 link_rate: LR_LAN - 1 ms, 1240 KB/s 22/02/2019 08:35:16 copy_tiles: allocating first_line at size 41 22/02/2019 08:35:19 created selwin: 0x20002d 22/02/2019 08:35:19 called initialize_xfixes() IllegalArgumentException java.util.concurrent.ExecutionException: java.lang.IllegalArgumentException at net.filebot.ui.rename.RenamePanel$AutoCompleteAction$1.done(RenamePanel.java:936) Caused by: java.lang.IllegalArgumentException at net.filebot.ui.rename.EpisodeListMatcher.match(EpisodeListMatcher.java:85) at net.filebot.ui.rename.RenamePanel$AutoCompleteAction$1.doInBackground(RenamePanel.java:921) at net.filebot.ui.rename.RenamePanel$AutoCompleteAction$1.doInBackground(RenamePanel.java:917) So checked the usual suspect, and found: /tmp # which java /usr/bin/java /tmp # cd /usr/bin /usr/bin # ldd java /lib/ld-musl-x86_64.so.1 (0x14b8fee8b000) Error loading shared library libjli.so: No such file or directory (needed by java) libc.musl-x86_64.so.1 => /lib/ld-musl-x86_64.so.1 (0x14b8fee8b000) Error relocating java: JLI_Launch: symbol not found /usr/bin # EDIT: ALSO!!! Beta 4.8.5 is out 🙂 https://www.filebot.net/forums/viewtopic.php?t=9535 Thanks for reporting. I will update container to the latest version and we will see if it fixes the issue. 1 Quote Link to comment
Djoss Posted February 25, 2019 Author Share Posted February 25, 2019 The container image has been updated with the latest FileBot version. For ldd complaining about missing library: The java binary has the proper rpath to find the library: /tmp # patchelf --print-rpath /usr/bin/java $ORIGIN/../lib/amd64/jli:$ORIGIN/../lib/amd64 So it seems that ldd doesn't use this information when showing the dependencies... Quote Link to comment
cybrnook Posted February 25, 2019 Share Posted February 25, 2019 (edited) Unfortunately, still the same issue when trying to search for a name match😞 IllegalArgumentException java.util.concurrent.ExecutionException: java.lang.IllegalArgumentException at net.filebot.ui.rename.RenamePanel$AutoCompleteAction$1.done(RenamePanel.java:940) Caused by: java.lang.IllegalArgumentException at net.filebot.ui.rename.EpisodeListMatcher.match(EpisodeListMatcher.java:83) at net.filebot.ui.rename.RenamePanel$AutoCompleteAction$1.doInBackground(RenamePanel.java:922) at net.filebot.ui.rename.RenamePanel$AutoCompleteAction$1.doInBackground(RenamePanel.java:918) Edited February 25, 2019 by cybrnook Quote Link to comment
Djoss Posted February 25, 2019 Author Share Posted February 25, 2019 16 hours ago, cybrnook said: Unfortunately, still the same issue when trying to search for a name match😞 IllegalArgumentException java.util.concurrent.ExecutionException: java.lang.IllegalArgumentException at net.filebot.ui.rename.RenamePanel$AutoCompleteAction$1.done(RenamePanel.java:940) Caused by: java.lang.IllegalArgumentException at net.filebot.ui.rename.EpisodeListMatcher.match(EpisodeListMatcher.java:83) at net.filebot.ui.rename.RenamePanel$AutoCompleteAction$1.doInBackground(RenamePanel.java:922) at net.filebot.ui.rename.RenamePanel$AutoCompleteAction$1.doInBackground(RenamePanel.java:918) What are you doing exactly? I will try to reproduce... Quote Link to comment
cybrnook Posted February 25, 2019 Share Posted February 25, 2019 (edited) 3 hours ago, Djoss said: What are you doing exactly? I will try to reproduce... Load an episode into your queue, right click "Match" in the middle to choose your source, choose the TV DB one at the top (I assume any one would work as it happens as soon as you click) and then the error appears. Edited February 25, 2019 by cybrnook Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.