[Support] Djoss - FileBot


Djoss

Recommended Posts

3 hours ago, Gursh said:

Hi all, im getting this issue where the files are being skipped. Below is what I see... your help is appreciated not sure how to fix this. Thanks.

by default there is a 10 min, 50 mb limit where filebot skip the files

 

--def minLengthMS=0

 

in Automated Media Center: Custom Options: should solve your issue, when your files are bigger, longer ... then prolly bad encoded as mediainfo cant read it properly.

 

you can find these things easy in the filebot forums as note.

Link to comment

I have a question about hardlinking on the AMC.

 

Could someone point me to how I need to set up my input and output directories to allow for hardlinking? Currently I'm getting the "I/O cross link" error and it resorts to copying files over.

 

My initial setup was:

input -> /mnt/user/downloads/completed

output -> /mnt/user/media

 

But after I found this .... (from https://github.com/filebot/filebot-docker#notes-on---action-move-and---action-hardlink )

image.png.5e010034e0c4e2347bc48478881ebd13.png

 

I switched to:

input -> /mnt/user/media/downloads/completed

output -> /mnt/user/media

 

And I still get the same error, which looks like this:

image.png.457708ddca0f8a5a8a91f62b6b2fde12.png

 

Could someone help me with the proper setup so as to allow AMC to hardlink?

 

Thank you so much, from an ignorant noob.

Link to comment
18 hours ago, alturismo said:

by default there is a 10 min, 50 mb limit where filebot skip the files

 

--def minLengthMS=0

 

in Automated Media Center: Custom Options: should solve your issue, when your files are bigger, longer ... then prolly bad encoded as mediainfo cant read it properly.

 

you can find these things easy in the filebot forums as note.

Thanks!

Link to comment
  • 1 month later...
On 9/21/2021 at 1:58 PM, Djoss said:

Looks like the file is corrupted ?  Did you try to see its content with a text editor ?

file could open fine in notepad++. I tried deleting it and it created it again. everything is ok. I just don't have old history but it should be ok

thanks

Link to comment
  • 2 weeks later...

Hi there, is there a guide or has someone asked about setting up filebot with jdownloader? I want to use the AMC Scripting stuff, but I have no clue what parts to edit. Is it possible to set filebot to monitor 2 folders. 1 being films, and the other being tv shows. then filebot can rename and move films and tv shows. any way to do this? please

Link to comment
2 hours ago, Goldmaster said:

filebot to monitor 2 folders. 1 being films, and the other being tv shows. then filebot can rename and move films and tv shows. any way to do this? please

filebot recognize what a film and a tvshow is ... and move them accordingly, no need to monitor 2 different instances, just where your final unpacked jdownloads are ...

 

filebot has a great tutorial, forum and a good discord (dev is pretty active there), so you should find what you looking for.

 

Tipp, there is a reason why there are these config options ... read the filebot manuals and you should know what is todo or keep it simple as {plex}

 

image.thumb.png.9639205b606deced367c0e2a273e08cf.png

Link to comment

AHA! so for the monitoring, I would just paste in the watch folder and then have how its set (so stick with plex options). but how do i them run the amc? do i need to just add after {plex} where to send files to? such as /mnt/user/Hoard/video/tv-anime/{plex} in the fields there?

Link to comment
2 hours ago, Goldmaster said:

I would just paste in the watch folder and then have how its set (so stick with plex options). but how do i them run the amc?

 

please read the infos on the variables, try it and see what happenssc...

 

tap the show more settings button as sample.

 

image.thumb.png.4d3a07d90ec7327f9a1df2f56d1d6c17.png

 

while /storage was configured at the beginning

 

image.thumb.png.e946745651b8ae8b60f977280858b00f.png

Link to comment

Ok so I have got everything setup with test. I did get i/o error read write in the logs. I did see a solution was to add --def minLengthMS=0 into the advanced parameters. but it seams that file-bot isnt moving tv shows even though they are there and is set correctly. I just get

[amc] Invoking AMC script...
[amc] Run script [fn:amc] at [Mon Oct 11 11:39:15 BST 2021]
[amc] Parameter: artwork = n
[amc] Parameter: music = n
[amc] Parameter: clean = y
[amc] Parameter: excludeList = /config/amc-exlude-list.txt
[amc] Parameter: movieFormat = /mnt/user/Hoard/video/movies/{plex}
[amc] Parameter: musicFormat = {plex}
[amc] Parameter: seriesFormat = /mnt/user/Hoard/video/tv-shows/{plex}
[amc] Parameter: animeFormat = /mnt/user/Hoard/video/tv-anime/{plex}
[amc] Parameter: minLengthMS = 0
[amc] Argument[0]: /watch
[amc] Use excludes: /config/amc-exlude-list.txt (15)
[amc] No files selected for processing
[amc] Done ¯_(ツ)_/¯

 

But there are files, so move them. I have tried restarting and setting the wait time from 1800 seconds to 60 and that made no difference. @alturismo

Link to comment

Hello everone,

 

I have installed the Filebot container yesterday with default parameters (except the opensubtitles credentials) and when I start it, I cannot connect via the web GUI, there's a red cross on the top left of the web screen with error "Server disconnected (code 1006)". I have no clue on where to start fixing this. Here's the log of the container:

 

[s6-init] making user provided files available at /var/run/s6/etc...exited 0.
[s6-init] ensuring user provided files have correct perms...exited 0.
[fix-attrs.d] applying ownership & permissions fixes...
[fix-attrs.d] done.
[cont-init.d] executing container initialization scripts...
[cont-init.d] 00-app-niceness.sh: executing...
[cont-init.d] 00-app-niceness.sh: exited 0.
[cont-init.d] 00-app-script.sh: executing...
[cont-init.d] 00-app-script.sh: exited 0.
[cont-init.d] 00-app-user-map.sh: executing...
[cont-init.d] 00-app-user-map.sh: exited 0.
[cont-init.d] 00-clean-logmonitor-states.sh: executing...
[cont-init.d] 00-clean-logmonitor-states.sh: exited 0.
[cont-init.d] 00-clean-tmp-dir.sh: executing...
[cont-init.d] 00-clean-tmp-dir.sh: exited 0.
[cont-init.d] 00-set-app-deps.sh: executing...
[cont-init.d] 00-set-app-deps.sh: exited 0.
[cont-init.d] 00-set-home.sh: executing...
[cont-init.d] 00-set-home.sh: exited 0.
[cont-init.d] 00-take-config-ownership.sh: executing...
[cont-init.d] 00-take-config-ownership.sh: exited 0.
[cont-init.d] 00-xdg-runtime-dir.sh: executing...
[cont-init.d] 00-xdg-runtime-dir.sh: exited 0.
[cont-init.d] 10-certs.sh: executing...
[cont-init.d] 10-certs.sh: exited 0.
[cont-init.d] 10-cjk-font.sh: executing...
[cont-init.d] 10-cjk-font.sh: exited 0.
[cont-init.d] 10-nginx.sh: executing...
[cont-init.d] 10-nginx.sh: exited 0.
[cont-init.d] 10-vnc-password.sh: executing...
[cont-init.d] 10-vnc-password.sh: exited 0.
[cont-init.d] 10-web-index.sh: executing...
[cont-init.d] 10-web-index.sh: exited 0.
[cont-init.d] filebot.sh: executing...
Enter OpenSubtitles username: Enter OpenSubtitles password: Testing OpenSubtitles... OK
Done ヾ(@⌒ー⌒@)ノ
[cont-init.d] filebot.sh: exited 0.
[cont-init.d] done.
[services.d] starting services
[services.d] starting s6-fdholderd...
[services.d] starting certsmonitor...
[services.d] starting nginx...
[services.d] starting xvfb...
[nginx] starting...
[certsmonitor] disabling service: secure connection not enabled.
[xvfb] starting...
[services.d] starting amc...
[services.d] starting logmonitor...
[services.d] starting statusmonitor...
[logmonitor] no file to monitor: disabling service...
[services.d] starting openbox...
[statusmonitor] no file to monitor: disabling service...
[openbox] starting...
[services.d] starting x11vnc...
[services.d] starting app...
[x11vnc] starting...
[app] starting FileBot...
15/10/2021 09:06:21 passing arg to libvncserver: -rfbport
15/10/2021 09:06:21 passing arg to libvncserver: 5900
15/10/2021 09:06:21 passing arg to libvncserver: -rfbportv6
15/10/2021 09:06:21 passing arg to libvncserver: -1
15/10/2021 09:06:21 passing arg to libvncserver: -httpportv6
15/10/2021 09:06:21 passing arg to libvncserver: -1
15/10/2021 09:06:21 passing arg to libvncserver: -desktop
15/10/2021 09:06:21 passing arg to libvncserver: FileBot
15/10/2021 09:06:21 x11vnc version: 0.9.14 lastmod: 2015-11-14 pid: 936

15/10/2021 09:06:21 Using X display :0
15/10/2021 09:06:21 rootwin: 0x43 reswin: 0x400001 dpy: 0x139709e0
15/10/2021 09:06:21
15/10/2021 09:06:21 ------------------ USEFUL INFORMATION ------------------
[services.d] done.
15/10/2021 09:06:21 X DAMAGE available on display, using it for polling hints.
15/10/2021 09:06:21 To disable this behavior use: '-noxdamage'
15/10/2021 09:06:21
15/10/2021 09:06:21 Most compositing window managers like 'compiz' or 'beryl'
15/10/2021 09:06:21 cause X DAMAGE to fail, and so you may not see any screen
15/10/2021 09:06:21 updates via VNC. Either disable 'compiz' (recommended) or
15/10/2021 09:06:21 supply the x11vnc '-noxdamage' command line option.
15/10/2021 09:06:21 X COMPOSITE available on display, using it for window polling.
15/10/2021 09:06:21 To disable this behavior use: '-noxcomposite'
15/10/2021 09:06:21
15/10/2021 09:06:21 Wireframing: -wireframe mode is in effect for window moves.
15/10/2021 09:06:21 If this yields undesired behavior (poor response, painting
15/10/2021 09:06:21 errors, etc) it may be disabled:
15/10/2021 09:06:21 - use '-nowf' to disable wireframing completely.
15/10/2021 09:06:21 - use '-nowcr' to disable the Copy Rectangle after the
15/10/2021 09:06:21 moved window is released in the new position.
15/10/2021 09:06:21 Also see the -help entry for tuning parameters.
15/10/2021 09:06:21 You can press 3 Alt_L's (Left "Alt" key) in a row to
15/10/2021 09:06:21 repaint the screen, also see the -fixscreen option for
15/10/2021 09:06:21 periodic repaints.
15/10/2021 09:06:21 GrabServer control via XTEST.
15/10/2021 09:06:21
15/10/2021 09:06:21 Scroll Detection: -scrollcopyrect mode is in effect to
15/10/2021 09:06:21 use RECORD extension to try to detect scrolling windows
15/10/2021 09:06:21 (induced by either user keystroke or mouse input).

15/10/2021 09:06:21 If this yields undesired behavior (poor response, painting
15/10/2021 09:06:21 errors, etc) it may be disabled via: '-noscr'
15/10/2021 09:06:21 Also see the -help entry for tuning parameters.
15/10/2021 09:06:21 You can press 3 Alt_L's (Left "Alt" key) in a row to
15/10/2021 09:06:21 repaint the screen, also see the -fixscreen option for
15/10/2021 09:06:21 periodic repaints.
15/10/2021 09:06:21
15/10/2021 09:06:21 XKEYBOARD: number of keysyms per keycode 7 is greater
15/10/2021 09:06:21 than 4 and 51 keysyms are mapped above 4.
15/10/2021 09:06:21 Automatically switching to -xkb mode.
15/10/2021 09:06:21 If this makes the key mapping worse you can
15/10/2021 09:06:21 disable it with the "-noxkb" option.
15/10/2021 09:06:21 Also, remember "-remap DEAD" for accenting characters.
15/10/2021 09:06:21
15/10/2021 09:06:21 X FBPM extension not supported.
Xlib: extension "DPMS" missing on display ":0".
15/10/2021 09:06:21 X display is not capable of DPMS.
15/10/2021 09:06:21 --------------------------------------------------------
15/10/2021 09:06:21
15/10/2021 09:06:21 Default visual ID: 0x21
15/10/2021 09:06:21 Read initial data from X display into framebuffer.
15/10/2021 09:06:21 initialize_screen: fb_depth/fb_bpp/fb_Bpl 24/32/5120
15/10/2021 09:06:21
15/10/2021 09:06:21 X display :0 is 32bpp depth=24 true color
15/10/2021 09:06:21
15/10/2021 09:06:21 Listening for VNC connections on TCP port 5900
15/10/2021 09:06:21
15/10/2021 09:06:21 Xinerama is present and active (e.g. multi-head).
15/10/2021 09:06:21 Xinerama: number of sub-screens: 1
15/10/2021 09:06:21 Xinerama: no blackouts needed (only one sub-screen)
15/10/2021 09:06:21
15/10/2021 09:06:21 fb read rate: 1978 MB/sec
15/10/2021 09:06:21 fast read: reset -wait ms to: 10
15/10/2021 09:06:21 fast read: reset -defer ms to: 10
15/10/2021 09:06:21 The X server says there are 10 mouse buttons.

15/10/2021 09:06:21 screen setup finished.
15/10/2021 09:06:21

The VNC desktop is: 918b09174638:0

0

******************************************************************************
Have you tried the x11vnc '-ncache' VNC client-side pixel caching feature yet?

The scheme stores pixel data offscreen on the VNC viewer side for faster
retrieval. It should work with any VNC viewer. Try it by running:

x11vnc -ncache 10 ...

One can also add -ncache_cr for smooth 'copyrect' window motion.
More info: http://www.karlrunge.com/x11vnc/faq.html#faq-client-caching

FileBot 4.9.3 (r8340) JDK8
JNA Native: 5.2.2
MediaInfo: 21.03
Tools: fpcalc/1.4.3 p7zip/16.02 unrar/5.61
Extended Attributes: OK
Unicode Filesystem: OK
Script Bundle: 2021-08-02 (r761)
Groovy: 3.0.7
JRE: OpenJDK Runtime Environment 1.8.0_275
JVM: 64-bit OpenJDK 64-Bit Server VM
CPU/MEM: 8 Core / 3.7 GB Max Memory / 52 MB Used Memory
OS: Linux (amd64)
HW: Linux 918b09174638 5.10.28-Unraid #1 SMP Wed Apr 7 08:23:18 PDT 2021 x86_64 GNU/Linux
CPU/MEM: Intel(R) Core(TM) i5-10210U CPU @ 1.60GHz [MemTotal: 16 GB | MemFree: 2.3 GB | MemAvailable: 13 GB]
STORAGE: btrfs [/] @ 11 GB | btrfs [/watch] @ 11 GB | btrfs [/:/output:rw] @ 11 GB | btrfs [/:/watch:rw] @ 11 GB | fuse.shfs [/storage] @ 8 TB | fuse.shfs [/config] @ 914 GB | btrfs [/output] @ 11 GB

p
DATA: /config
Package: DOCKER
License: UNREGISTERED


(process:965): dconf-CRITICAL **: 09:06:23.780: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:965): dconf-CRITICAL **: 09:06:23.780: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:965): dconf-CRITICAL **: 09:06:23.780: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:965): dconf-CRITICAL **: 09:06:23.780: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:965): dconf-CRITICAL **: 09:06:23.780: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:965): dconf-CRITICAL **: 09:06:23.780: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:965): dconf-CRITICAL **: 09:06:23.781: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:965): dconf-CRITICAL **: 09:06:23.781: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:965): dconf-CRITICAL **: 09:06:23.781: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

(process:965): dconf-CRITICAL **: 09:06:23.781: unable to create file '/tmp/run/user/app/dconf/user': Permission denied. dconf will not work properly.

------------------- UPDATE AVAILABLE: FileBot 4.9.4 (r8735) --------------------

Done ヾ(@⌒ー⌒@)ノ

 

Any help greatly appreciated!

 

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.