JohnO Posted February 15, 2018 Share Posted February 15, 2018 1 hour ago, wgstarks said: Really. I’ll have to test mine again. All I got was a blank screen the last time I tested the terminal window. Do your cpu loads also display correctly in the dashboard tab? Yes -- both looked fine. See attached. Link to comment
ljm42 Posted February 15, 2018 Share Posted February 15, 2018 20 minutes ago, JohnO said: Yes -- both looked fine. See attached. I'm guessing you haven't set a root password? Safari has issues with authenticated websockets, which means if you have a root password set you probably won't see the CPU load Link to comment
wgstarks Posted February 15, 2018 Share Posted February 15, 2018 31 minutes ago, ljm42 said: I'm guessing you haven't set a root password? Safari has issues with authenticated websockets, which means if you have a root password set you probably won't see the CPU load Yeah. I just checked mine. Same version of Safari but no Terminal or cpu load (as expected). Link to comment
Jeronyson Posted February 16, 2018 Share Posted February 16, 2018 Any devs reaction on this? Link to comment
JohnO Posted February 16, 2018 Share Posted February 16, 2018 17 hours ago, ljm42 said: I'm guessing you haven't set a root password? Safari has issues with authenticated websockets, which means if you have a root password set you probably won't see the CPU load Interesting. You are correct. Root is disabled on this Mac. I guess I haven't found anything I need to do on this Mac that I can't do with sudo. Link to comment
wgstarks Posted February 16, 2018 Share Posted February 16, 2018 15 minutes ago, JohnO said: Interesting. You are correct. Root is disabled on this Mac. I guess I haven't found anything I need to do on this Mac that I can't do with sudo. I think he means your unRAID server. Link to comment
trurl Posted February 16, 2018 Share Posted February 16, 2018 1 hour ago, wgstarks said: I think he means your unRAID server. Yes he definitely means the root password on your unRAID server. Link to comment
JohnO Posted February 16, 2018 Share Posted February 16, 2018 (edited) 1 hour ago, wgstarks said: I think he means your unRAID server. I need to have coffee before responding. But yes, also true, no root password in my unRAID server either. That caused me to look at the installation process. I don't recall a step requesting me to set root password. My initial unRAID installation was a few years ago, and I've been upgrading ever since. So now I'm unsure if setting a password, or disabling root would cause a problem or not. Edited February 16, 2018 by JohnO Link to comment
trurl Posted February 16, 2018 Share Posted February 16, 2018 2 minutes ago, JohnO said: I need to have coffee before responding. But yes, also true, no root password in my unRAID server either. That caused me to look at the installation process. I don't recall a step requesting me to set root password. My initial unRAID installation was a few years ago, and I've been upgrading ever since. So now I'm unsure if setting a password, or disabling root would cause a problem or not. You don't want to disable root. If you set a root password, the main difference you will notice is you will have to supply the username and password when logging into the webUI or to the command line. Link to comment
JonathanM Posted February 16, 2018 Share Posted February 16, 2018 33 minutes ago, trurl said: You don't want to disable root. If you set a root password, the main difference you will notice is you will have to supply the username and password when logging into the webUI or to the command line. and you will also notice 19 hours ago, ljm42 said: Safari has issues with authenticated websockets, which means if you have a root password set you probably won't see the CPU load Link to comment
IamSpartacus Posted February 21, 2018 Share Posted February 21, 2018 Is there still an issue with the temperature readings from NVMe drives not being detected?Sent from my SM-G955U using Tapatalk Link to comment
JorgeB Posted February 21, 2018 Share Posted February 21, 2018 6 hours ago, IamSpartacus said: Is there still an issue with the temperature readings from NVMe drives not being detected? Not that I know of, it was fixed on v6.4 and haven't seen anyone complain it didn't work since, if yours doesn't can you post the output of: smartctl -a /dev/nvme0 Link to comment
IamSpartacus Posted February 21, 2018 Share Posted February 21, 2018 (edited) 7 hours ago, johnnie.black said: Not that I know of, it was fixed on v6.4 and haven't seen anyone complain it didn't work since, if yours doesn't can you post the output of: smartctl -a /dev/nvme0 Yup, that command shows the temperature is 28C. But it will not display in the webgui whether I have the UD plugin installed or not. Edited February 21, 2018 by IamSpartacus Link to comment
limetech Posted February 21, 2018 Author Share Posted February 21, 2018 2 hours ago, IamSpartacus said: Yup, that command shows the temperature is 28C. But it will not display in the webgui whether I have the UD plugin installed or not. Need diagnostics.zip Link to comment
IamSpartacus Posted February 21, 2018 Share Posted February 21, 2018 15 minutes ago, limetech said: Need diagnostics.zip Here you go. spe-unraid01-diagnostics-20180221-1222.zip Link to comment
limetech Posted February 21, 2018 Author Share Posted February 21, 2018 1 hour ago, IamSpartacus said: Here you go. spe-unraid01-diagnostics-20180221-1222.zip Thanks, sorry, please also post output of this command: smartctl -A /dev/nvme0 Link to comment
IamSpartacus Posted February 21, 2018 Share Posted February 21, 2018 10 minutes ago, limetech said: Thanks, sorry, please also post output of this command: smartctl -A /dev/nvme0 === START OF SMART DATA SECTION === SMART/Health Information (NVMe Log 0x02, NSID 0xffffffff) Critical Warning: 0x00 Temperature: 30 Celsius Available Spare: 100% Available Spare Threshold: 50% Percentage Used: 1% Data Units Read: 5,283,815 [2.70 TB] Data Units Written: 9,113,217 [4.66 TB] Host Read Commands: 78,167,693 Host Write Commands: 94,579,880 Controller Busy Time: 1,076 Power Cycles: 477 Power On Hours: 3,532 Unsafe Shutdowns: 53 Media and Data Integrity Errors: 0 Error Information Log Entries: 1,138 Link to comment
limetech Posted February 21, 2018 Author Share Posted February 21, 2018 7 hours ago, IamSpartacus said: Yup, that command shows the temperature is 28C. But it will not display in the webgui whether I have the UD plugin installed or not. It should work if that device is configured as part of the cache pool or assigned to array. As unassigned device, still looking into it. In general, unRAID OS does not do anything with unassigned devices, meaning temperature not monitored, etc., (so as not to interfere with other s/w possibly using those devices, eg, VM's) though later webGui changes seem to break this rule. Guess we need to rethink this. Link to comment
nexusmaniac Posted February 22, 2018 Share Posted February 22, 2018 Call trace and completely locked up server (tried physically attaching too) No ability to run commands, etc. Latest version, HW in signature. ~6 days of uptime. I thought this was a stable release Hahaha Link to comment
trurl Posted February 22, 2018 Share Posted February 22, 2018 2 minutes ago, nexusmaniac said: ~6 days of uptime. So are you saying that it ran that long before it locked up? If so, then you might give us your diagnostics after a reboot. Also, of course, you might try a memtest and SAFE mode. Link to comment
nexusmaniac Posted February 22, 2018 Share Posted February 22, 2018 3 minutes ago, trurl said: So are you saying that it ran that long before it locked up? If so, then you might give us your diagnostics after a reboot. Also, of course, you might try a memtest and SAFE mode. Yes, 6 days of uptime. I went to work this morning trying to VPN back home for a moment but I've dropped in on lunch and found my server to be locked up with a call trace on screen Memtest runs perfectly for 48hrs, I did a run after a 'spring clean' of my server a couple of weeks ago. Safe mode has made no diff. in the past, I'm confident it's not a Container or Plugin causing the issue. Diagnostic attached (after the reboot) raptor-diagnostics-20180222-1330.zip Link to comment
nexusmaniac Posted February 22, 2018 Share Posted February 22, 2018 Server died at 06:18am today (22nd Feb) If that's of any use. This is based on the last pingtime recorded by SmokePing Link to comment
hatemjaber Posted February 23, 2018 Share Posted February 23, 2018 First of all, forgive me for my lack of experience and knowledge of unRaid. Is it safe at this point to run AMD Thread ripper without running into stability issues? I am interested in a system with multiple GPU's and wanted to make sure before I purchase hardware that I will be able to run a machine without freezing issues. I will be building 2 separate builds; one for me and the other for a friend of mine. I have read quite a few posts but did not really feel 100% whether or not it was safe at this point to take the plunge. I looked at the Intel chips and to get something remotely powerful enough we would have to spend quite a bit more than purchasing AMD. If thread ripper is not ready for prime time on unRaid, what are the other options that will work that have a 8 or more cores and 16 threads? Link to comment
GreenDolphin Posted February 24, 2018 Share Posted February 24, 2018 4 hours ago, hatemjaber said: First of all, forgive me for my lack of experience and knowledge of unRaid. Is it safe at this point to run AMD Thread ripper without running into stability issues? I am interested in a system with multiple GPU's and wanted to make sure before I purchase hardware that I will be able to run a machine without freezing issues. I will be building 2 separate builds; one for me and the other for a friend of mine. I have read quite a few posts but did not really feel 100% whether or not it was safe at this point to take the plunge. I looked at the Intel chips and to get something remotely powerful enough we would have to spend quite a bit more than purchasing AMD. If thread ripper is not ready for prime time on unRaid, what are the other options that will work that have a 8 or more cores and 16 threads? Opinions will vary on this... First, I would personally not use any Threadripper CPU on a production server. The product line is far too new (<6 months since launch) for software written for it to be considered stable, which is a prime goal of any server implementation. Ditto for that matter for any other Ryzen CPU -- the architecture is too new. Second, which you may or may not care about is ECC support. Threadripper, officially supports ECC, but from discussions I've seen, apparently not all ThreadRipper motherboards do, and for some that explicitly say "ECC" in their specs, there are no ECC memory modules in their QVL. I don't know what that means in practice (I've seen conflicting reports), but I wouldn't bank on a non-officially-supported data-integrity feature. That said, ECC isn't mandatory for UnRAID (some folks here use it, some don't) although personally I think the extra protection, even for rare events, is worthwhile for the relatively low extra cost. For any actual issues with Ryzen , search the forum for "Ryzen", for example here -- there are a bunch for issues, although they are gradually being fixed. Some of the issues apparently require changes/fixes to the Linux kernel, which isn't up to Lime Tech, and although I'm sure this'll happen, I don't consider Ryzen a "prime time" product yet. Alternatives: If you're willing to consider "pre-owned" CPUs, an older (1st-gen) Intel X5-2xxx Xeon might work for you. These are 8 core / 16 thread CPUs, see for example here (Intel ARK specs), usable in single- or dual-CPU configs. Originally selling for $1400-$1500 each, a bunch of large datacenters got rid of a huge amount about 2 years ago, and their price on the open market went <$100 . Even after several years of server farm use, they should still be good for quite a few years of UnRAID use. The price has gone up a bit since then, but they're still available at <$150 on eBay and other places; I'm running an E5-2665 I bought here using a new AsRock mobo. There's a really long thread on the forum on them. Link to comment
tjb_altf4 Posted February 24, 2018 Share Posted February 24, 2018 I'm running Threadripper 1950x on an ASRock Taichi mobo, on latest unRAID + mobo drivers I have had no stability issues and no issues with VM passthrough on Windows or Linux based OS. TR is picky with its RAM, but I seem to have it right and I'm currently running 64GB of 3200Mhz C14 on out of the box XMP profiles. Link to comment
Recommended Posts