mrdally204 Posted February 5, 2018 Posted February 5, 2018 Good Morning, I decided to upgrade from 6.3.5 to 6.4.1 last night and following a reboot my VM and plugin tabs did not populate anything. The tabs loaded up a white page. I then tried to remote into my Windows VM only to find it didn't boot :(. I immediately rolled back to 6.3.5 as I needed the server to be running. I plan on retrying this afternoon and if I hit this scenario again, what information will I need to pull in order to troubleshoot this issue?
afoard Posted February 5, 2018 Posted February 5, 2018 I upgraded to 6.4.1 this morning as well and have no VMs. Will provide diags when I can get to them... VM Manager says VMs are enabled but the status is "Stopped"
jbear Posted February 8, 2018 Posted February 8, 2018 I have the same problem as well, long time user, ran all the beta's prior to 6.4, everything was fine under 6.4, VM status is stopped in 6.4.1.
jbear Posted February 8, 2018 Posted February 8, 2018 7 minutes ago, jbear said: I have the same problem as well, long time user, ran all the beta's prior to 6.4, everything was fine under 6.4, VM status is stopped in 6.4.1. FYI (for those interested), I was able to fix mine by tinkering with the paths, default ISO storage path was blank or incorrect.
StuMcBill Posted February 8, 2018 Posted February 8, 2018 Out of curiosity, how easy is it to downgrade in the event that something goes wrong?
afoard Posted February 8, 2018 Posted February 8, 2018 1 hour ago, StuMcBill said: Out of curiosity, how easy is it to downgrade in the event that something goes wrong? Very easy. SSH into your server and navigate to /boot/previous and move all of those files into /boot and reload your system.
afoard Posted February 8, 2018 Posted February 8, 2018 2 hours ago, jbear said: FYI (for those interested), I was able to fix mine by tinkering with the paths, default ISO storage path was blank or incorrect. Can confirm this worked for me.
ljm42 Posted February 8, 2018 Posted February 8, 2018 This post should prove helpful. Ideally you would read it before upgrading, but it can still help afterwards too
z0rn Posted February 9, 2018 Posted February 9, 2018 [SOLVED] replacing the -img File and fixing the boot loader did the job - i'm fine with that. [/SOLVED] Hello everybody, looks like I've tried too hard to fix it by myself. My VMs disappeared with the 4.6.1 Update (4.6.0 was fine). So I tried to fix paths and got the VM system working again - but with no VMs. When new VMs are created now, their disk files appear next to the old ones, so paths seem to be ok? I didn't succeed ceating new VMs and just replace the disk files with my old ones. How can I include my VMs again, please? [EDIT] ok, so far I figured out the location of the .xml files for the VMs and as I only can find the .xml of my new VM I am positive to get my old .xmls back in there again... sadly this method: seems not to be working anymore. in my backed up "domain.img" I can't find those XML parts... somebody knows where they are located now? [/EDIT]
cmer Posted February 12, 2018 Posted February 12, 2018 On 2018-02-08 at 5:41 PM, afoard said: Can confirm this worked for me. Worked for me as well. I didn't even know there was such a setting. It's under "Advanced" if you're looking for it.
mrdally204 Posted February 13, 2018 Author Posted February 13, 2018 I tried again with the same result. The odd thing about my experience that differs from the above is nothing is shown in my "VMs" tab, it is a white screen. There is not an apparent way to even make a new VM. My first instinct is the way I made the VMs. It was early in Unraid support of VMs, and I followed a forum guide that had me mount the VM drive in the go file, outside of Unraid web ui. Is this a problem? Anyways, I would appreciate a little help if someone is willing to have a look. I'm still trying to make sense of it.
ljm42 Posted February 13, 2018 Posted February 13, 2018 4 hours ago, mrdally204 said: I tried again with the same result. I have included my diagnostic output in the attached link. The odd thing about my experience that differs from the above is nothing is shown in my "VMs" tab, it is a white screen. There is not an apparent way to even make a new VM. My first instinct is the way I made the VMs. It was early in Unraid support of VMs, and I followed a forum guide that had me mount the VM drive in the go file, outside of Unraid web ui. Is this a problem? Anyways, I would appreciate a little help if someone is willing to have a look. I'm still trying to make sense of it. https://dl.orangedox.com/SelnyY go to Settings -> VM Manager, switch to Advanced View, and make sure all of the paths are valid. More details here: 4 hours ago, mrdally204 said: I followed a forum guide that had me mount the VM drive in the go file, outside of Unraid web ui. Is this a problem? I'm not sure about this part, but the paths mentioned above are definitely an issue.
mrdally204 Posted February 15, 2018 Author Posted February 15, 2018 Changing the paths under the advanced options did indeed solve the problem. I think my biggest hang up was that the VM tab was completely blank. There should really be some simple text in there to direct a user on what's going on, where to go to enable/fix, etc. A little guidance within the UI would help a lot I would expect. Thanks again for the helpful direction
Recommended Posts
Archived
This topic is now archived and is closed to further replies.