Hello,

 

I found a few older topics about it, but i dont fully understand how to read te logs to pin point wich drive is failing. So i can sent it for a RMA.

 

Feb 6 23:36:02 Tower kernel: ata10.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6 frozen
Feb 6 23:36:02 Tower kernel: ata10.00: irq_stat 0x08000000, interface fatal error
Feb 6 23:36:02 Tower kernel: ata10: SError: { UnrecovData Handshk }
Feb 6 23:36:02 Tower kernel: ata10.00: failed command: WRITE DMA EXT
Feb 6 23:36:02 Tower kernel: ata10.00: cmd 35/00:40:b8:b9:90/00:05:08:00:00/e0 tag 1 dma 688128 out
Feb 6 23:36:02 Tower kernel: res 50/00:00:b8:b9:90/00:00:08:00:00/e0 Emask 0x10 (ATA bus error)
Feb 6 23:36:02 Tower kernel: ata10.00: status: { DRDY }
Feb 6 23:36:02 Tower kernel: ata10: hard resetting link
Feb 6 23:36:02 Tower kernel: ata10: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Feb 6 23:36:02 Tower kernel: ata10.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
Feb 6 23:36:02 Tower kernel: ata10.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
Feb 6 23:36:02 Tower kernel: ata10.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
Feb 6 23:36:02 Tower kernel: ata10.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
Feb 6 23:36:02 Tower kernel: ata10.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
Feb 6 23:36:02 Tower kernel: ata10.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out

 

 

I included my log. Thanks in advance

tower-diagnostics-20180207-0933.zip

Edited February 7, 20188 yr by McKentin

Looks more like a cable problem, replace the SATA cable and see if they go away.

1 hour ago, johnnie.black said:

Looks more like a cable problem, replace the SATA cable and see if they go away.

New motherboard, and all brand new cables. Still need to know wich HDD to look for.

3 hours ago, McKentin said:

Still need to know wich HDD to look for.

Parity