[Solved] No device found for nic


Recommended Posts

Long story short I replaced a cache drive that went into read only mode not sure why I think it filled 100% and unraid killed all dockers, burned up a flash drive stupidly by inserting a internal usb header into the wrong port on the board and replaced it. Got everything up and running overnight 100% recreated configs and dockers and rebuilt plex library all worked great and then the server was unreachable today. Restart the server, its still unreachable no ip, reboot everything modem router and all switches, take switch out of loop, new Ethernet cable no luck. So I move the flash drive to different port, recreate flash drive, recreate new flash drive I bought, set manual ip, no luck. Tried not copying configs just simple basic unraid same issue. Now when I ifconfig eth0 it says no device found, this was not an issue before just no ip, a few times it got a internet ip but was not view able in the router nor accessible via http://tower/. Verified bios settings, all normal, turned off VT-D as I read something in the logs about imouu causing instability and I have no setting for imouu and still no change. So I pulled diags and am lost beyond it cant obtain ip address, and doesnt see the onboard nic. I ordered a new intel Pro\1000 as Im betting my onboard nic died but curious if im just dumb.

 

Hardware

Motherboard: Asus Sabertooth x58

Nic: Realtek 8110sc

CPU: I7 960

Ram: 18gb ddr3 1600

Drives: 6 WD RED 8tb

Cache: Sandisk 960gb ultra 2, Sandisk 240gb ultra 3

Nic:realtek 8110sc

PSU: Corsair 850 

USB Drive: multiple flash drives tried and ports all usb 2.0 as this board wont boot off 3.0

 

Thanks for any insight

tower-smart-20180207-0110.zip

tower-diagnostics-20180208-0054.zip

 

Turns out it was a failed ethernet port, something tells me my usb header fried it, intel 2 port 1000 fired right up with an Ip and im up and running!

 

FYI a Dlink 830T does not have a working driver in Unraid 6.4.1.

 

Thanks Johnnie for your support.

Edited by Oreonipples
Whoops forgot diags...
Link to comment

The onboard NIC is detected but it can't get an IP address and it's spamming the log with link down/up messages, so probably failing:


 

Feb  8 16:17:41 Tower dhcpcd[1631]: br0: carrier lost
Feb  8 16:17:41 Tower kernel: r8169 0000:07:01.0 eth0: link down
Feb  8 16:17:41 Tower kernel: r8169 0000:07:01.0 eth0: link down
Feb  8 16:17:41 Tower kernel: r8169 0000:07:01.0 eth0: link down
Feb  8 16:17:41 Tower kernel: r8169 0000:07:01.0 eth0: link down
Feb  8 16:17:41 Tower kernel: r8169 0000:07:01.0 eth0: link down
Feb  8 16:17:41 Tower kernel: r8169 0000:07:01.0 eth0: link down
Feb  8 16:17:41 Tower kernel: r8169 0000:07:01.0 eth0: link down
Feb  8 16:17:41 Tower kernel: r8169 0000:07:01.0 eth0: link down
Feb  8 16:17:42 Tower kernel: r8169 0000:07:01.0 eth0: link down
Feb  8 16:17:42 Tower kernel: r8169 0000:07:01.0 eth0: link down
Feb  8 16:17:42 Tower kernel: r8169 0000:07:01.0 eth0: link down
Feb  8 16:17:42 Tower kernel: r8169 0000:07:01.0 eth0: link down
Feb  8 16:17:42 Tower kernel: r8169 0000:07:01.0 eth0: link down
Feb  8 16:17:42 Tower kernel: r8169 0000:07:01.0 eth0: link down
Feb  8 16:17:42 Tower kernel: r8169 0000:07:01.0 eth0: link down
Feb  8 16:17:42 Tower kernel: r8169 0000:07:01.0 eth0: link down
Feb  8 16:17:42 Tower kernel: r8169 0000:07:01.0 eth0: link down
Feb  8 16:17:42 Tower kernel: r8169 0000:07:01.0 eth0: link down
Feb  8 16:17:42 Tower kernel: r8169 0000:07:01.0 eth0: link down
Feb  8 16:17:42 Tower kernel: r8169 0000:07:01.0 eth0: link down
Feb  8 16:17:42 Tower kernel: r8169 0000:07:01.0 eth0: link down
Feb  8 16:17:42 Tower kernel: r8169 0000:07:01.0 eth0: link down
Feb  8 16:17:42 Tower kernel: r8169 0000:07:01.0 eth0: link down
Feb  8 16:17:42 Tower kernel: r8169 0000:07:01.0 eth0: link down
Feb  8 16:17:42 Tower kernel: r8169 0000:07:01.0 eth0: link down
Feb  8 16:17:42 Tower kernel: r8169 0000:07:01.0 eth0: link down
Feb  8 16:17:42 Tower kernel: r8169 0000:07:01.0 eth0: link down

....

Feb  8 16:17:58 Tower kernel: r8169 0000:07:01.0 eth0: link up
Feb  8 16:17:58 Tower kernel: r8169 0000:07:01.0 eth0: link up
Feb  8 16:17:58 Tower kernel: r8169 0000:07:01.0 eth0: link up
Feb  8 16:17:58 Tower kernel: r8169 0000:07:01.0 eth0: link up
Feb  8 16:17:58 Tower kernel: r8169 0000:07:01.0 eth0: link up
Feb  8 16:17:58 Tower kernel: r8169 0000:07:01.0 eth0: link up
Feb  8 16:17:59 Tower kernel: r8169 0000:07:01.0 eth0: link up
Feb  8 16:17:59 Tower kernel: r8169 0000:07:01.0 eth0: link up
Feb  8 16:17:59 Tower kernel: r8169 0000:07:01.0 eth0: link up
Feb  8 16:17:59 Tower kernel: r8169 0000:07:01.0 eth0: link up
Feb  8 16:18:03 Tower kernel: net_ratelimit: 507 callbacks suppressed
Feb  8 16:18:03 Tower kernel: r8169 0000:07:01.0 eth0: link up
Feb  8 16:18:03 Tower kernel: r8169 0000:07:01.0 eth0: link up
Feb  8 16:18:03 Tower kernel: r8169 0000:07:01.0 eth0: link up
Feb  8 16:18:03 Tower kernel: r8169 0000:07:01.0 eth0: link up
Feb  8 16:18:03 Tower kernel: r8169 0000:07:01.0 eth0: link up
Feb  8 16:18:04 Tower kernel: r8169 0000:07:01.0 eth0: link up
Feb  8 16:18:04 Tower kernel: r8169 0000:07:01.0 eth0: link up
Feb  8 16:18:04 Tower kernel: r8169 0000:07:01.0 eth0: link up
Feb  8 16:18:04 Tower kernel: r8169 0000:07:01.0 eth0: link up
Feb  8 16:18:04 Tower kernel: r8169 0000:07:01.0 eth0: link up
Feb  8 16:18:08 Tower kernel: net_ratelimit: 500 callbacks suppressed
Feb  8 16:18:08 Tower kernel: r8169 0000:07:01.0 eth0: link up
Feb  8 16:18:08 Tower kernel: r8169 0000:07:01.0 eth0: link up
Feb  8 16:18:08 Tower kernel: r8169 0000:07:01.0 eth0: link up
Feb  8 16:18:08 Tower kernel: r8169 0000:07:01.0 eth0: link up
Feb  8 16:18:09 Tower kernel: r8169 0000:07:01.0 eth0: link up
Feb  8 16:18:09 Tower kernel: r8169 0000:07:01.0 eth0: link up
Feb  8 16:18:09 Tower kernel: r8169 0000:07:01.0 eth0: link up
Feb  8 16:18:09 Tower kernel: r8169 0000:07:01.0 eth0: link up
Feb  8 16:18:09 Tower kernel: r8169 0000:07:01.0 eth0: link up
Feb  8 16:18:09 Tower kernel: r8169 0000:07:01.0 eth0: link up
Feb  8 16:18:13 Tower kernel: net_ratelimit: 497 callbacks suppressed

 

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.