ledfortr Posted February 14, 2018 Share Posted February 14, 2018 Hi All - I have an r710 and my 6 drive bays are full. I wanted to also use the onboard SATA to get another drive hooked up. So my plan is to get an optical caddy and a gp703 cable and tie it into the motherboard. The optical caddy only fits 2.5" drives and the only 2.5 inch drive I have is my cache SSD. Will the system recognize the move to the new port and not have to be reconfigured or will i have to rebuild the system? The cache drive is currently connect to an h200 controller. Thanks for the help! Quote Link to comment
Frank1940 Posted February 14, 2018 Share Posted February 14, 2018 It should work properly as unRAID tracks disks by the manufacturer's serial number. (I seem to recall that there are a VERY few SATA HBA cards that do not report the serial numbers correctly and that would give you a problem.) Quote Link to comment
rilles Posted February 14, 2018 Share Posted February 14, 2018 yes. I moved to a new case - i didn't track what was plugged into what - when I started unraid from the new box it recognized all drives for that they should be. Quote Link to comment
ledfortr Posted February 14, 2018 Author Share Posted February 14, 2018 Cool, thanks all! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.