dynamix s3 sleep Wait for device inactivity

[samtex]

Since unRAID 6.4 "Wait for array inactivity" doesn't work properly so I am back to relying on the "Wait for device inactivity" setting.  My values are "192.168.1.102,192.168.1.134" but the plugin only seems to wait until the first ip address is unreachable but not the second. Here is the log:

 

Feb 16 09:20:22 Tower s3_sleep: ----------------------------------------------
Feb 16 09:20:22 Tower s3_sleep: command-args=-C 1 -m 20 -e eth0 -N 0 -i 192.168.1.102 -i 192.168.1.134 -D 2
Feb 16 09:20:22 Tower s3_sleep: action mode=sleep
Feb 16 09:20:22 Tower s3_sleep: check disks status=no
Feb 16 09:20:22 Tower s3_sleep: check network activity=no
Feb 16 09:20:22 Tower s3_sleep: check active devices=192.168.1.102 192.168.1.134
Feb 16 09:20:22 Tower s3_sleep: check local login=no
Feb 16 09:20:22 Tower s3_sleep: check remote login=no
Feb 16 09:20:22 Tower s3_sleep: version=3.0.6
Feb 16 09:20:22 Tower s3_sleep: ----------------------------------------------
Feb 16 09:20:22 Tower s3_sleep: included disks=sdb sdc sdd sde sdf
Feb 16 09:20:22 Tower s3_sleep: excluded disks=sda
Feb 16 09:20:22 Tower s3_sleep: ----------------------------------------------
Feb 16 09:20:22 Tower s3_sleep: s3_sleep process ID 27807 started, To terminate it, type: s3_sleep -q
Feb 16 09:20:22 Tower s3_sleep: All monitored HDDs are spun down
Feb 16 09:20:22 Tower s3_sleep: Extra delay period running: 20 minute(s)
Feb 16 09:21:22 Tower s3_sleep: All monitored HDDs are spun down
Feb 16 09:21:22 Tower s3_sleep: Extra delay period running: 19 minute(s)
Feb 16 09:22:22 Tower s3_sleep: All monitored HDDs are spun down

Any ideas how to make the plugin wait for BOTH ip addresses to be unavailable?

[drcos]

Array activity seems to be fixed with 6.4.1 (works for me)

 

 

[samtex]

Does your configuration wait for two different ip adresses or just one? Because mine is set to wait for two but it just waits for the first to be unavailable but ignores the second.