February 18, 20188 yr Guys I updated to fresh 6.4.1 and now it is not detecting my second network port (eth1), what should I do? This is my network file: # Generated settings: IFNAME[0]="br0" BONDNAME[0]="bond0" BONDING_MIIMON[0]="100" BRNAME[0]="br0" BRSTP[0]="no" BRFD[0]="0" BONDING_MODE[0]="1" BONDNICS[0]="eth0" BRNICS[0]="bond0" DESCRIPTION[0]="" USE_DHCP[0]="no" IPADDR[0]="192.168.1.100" NETMASK[0]="255.255.255.0" GATEWAY="192.168.1.1" DHCP_KEEPRESOLV="yes" DNS_SERVER1="192.168.1.1" DNS_SERVER2="" DNS_SERVER3="" MTU[0]="" IFNAME[1]="br1" BRNAME[1]="br1" BRNICS[1]="eth1" BRSTP[1]="no" BRFD[1]="0" DESCRIPTION[1]="" USE_DHCP[1]="no" IPADDR[1]="100.100.100.30" NETMASK[1]="255.255.255.0" MTU[1]="" SYSNICS="2" Edited February 18, 20188 yr by Albahttiti
February 18, 20188 yr Community Expert You will need to provide a few more details. A list of the hardware involved-- MB, Network cards, etc. And the diagnostics file. Tools >> Diagnostics Attached this file with your next post.
February 18, 20188 yr Author I am using a Lenovo ThinkServer RD650 E5-2609 v4, 16GB DDR4, 720ix+1GB, 1100W PSU 4x 8TB WD Red Pro Drives + 1Tb Samsung Evo SSD Network: LENOVO ThinkServer 4XC0F28741 INTEL X540-T2 ANYFABRIC 10GB 2 PORT Ethernet r1-diagnostics-20180218-0648.zip Edited February 18, 20188 yr by Albahttiti
March 31, 20188 yr Author I updated to 6.5 and still the eth1 is not shown but after 5 to 10 reboots it shows but the interface not showing any cpu processes and any reboot cause the issue to happen over and over.
March 31, 20188 yr No NICs are being detected. Have you tried reseating the card or trying it in a different PCIe slot?
Archived
This topic is now archived and is closed to further replies.