February 19, 20188 yr EDIT: This is apparently solved for some reason. I installed unRaid 6.3.5 and it booted without issue. I then upgraded to 6.4.1 and it still booted no problem. Not sure what the issue was. Hello all, I picked up an ML350e G8 and am working to get it setup, however I am having a few issues even getting started. This may just be a hardware compatibility issue, but I would like to try to confirm that before going out and purchasing more hardware. I was hoping the hardware had been around long enough that it would be supported. The issue I am having is I simply cannot get the network up on the server. I have tried setting up the USB both with DHCP and Static IP, however the br0 interface still comes up with a 169.254 address. Additionally, when booting into GUI mode, I cannot connect to the web interface when attempting to browse to localhost or 127.0.0.1 despite being able to ping the IP address from the server. I tried to check the network configuration under/boot/config, however the only folder there is ssh. I have tried to build the USB stick on two different computers using two different USB sticks, so I'm not sure why I'm only seeing this one folder. I ran the diagnostics and found the following lines in lspci.txt: 06:00.0 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521] (rev 01) Subsystem: Hewlett-Packard Company Ethernet 1Gb 2-port 361i Adapter [103c:337f] 06:00.1 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521] (rev 01) Subsystem: Hewlett-Packard Company Ethernet 1Gb 2-port 361i Adapter [103c:337f] I'm not seeing a kernel driver in use for those two items, so I'm assuming the issue is the unsupported NICs. Any input would be appreciated. Thanks Edited February 20, 20188 yr by SMLLR
Archived
This topic is now archived and is closed to further replies.