February 24, 20188 yr Hey all I am concerned because I have replaced all cabling to correct this problem I also replaced the drive and am going out today to get a new drive controller the only other thing it could be. I am attaching A Diag and a system log please tell me what you think. I have read that it could be a problem with the kernel. the errors are toward the end of the system log. movies-syslog-20180224-1602.zip movies-diagnostics-20180224-1601.zip
February 24, 20188 yr Community Expert 9 out of 10 times it's a bad SATA cable, but if you've already replaced it could be a port/controller problem. P.S. change your onboard controller from IDE to SATA/AHCI mode.
February 24, 20188 yr Author I have no such setting in my bios. I have a Asus m3n78 pro if you want to check and see what settings I do have. I have a new sata controller card I am going to Install tonight. Hope that solves the problem.
February 25, 20188 yr Community Expert 39 minutes ago, megna22 said: I have no such setting in my bios. What's this then?
February 25, 20188 yr Author 7 minutes ago, megna22 said: Not sure where this came from but I have no such setting
February 25, 20188 yr Community Expert I'd be surprised if that setting is missing from any bios release including the first one: Advanced -> Onboard Device Configuration -> MCP Storage Config Edited February 25, 20188 yr by johnnie.black
Archived
This topic is now archived and is closed to further replies.