Seems unraid OS sees the card, but do not appear to be able to use it via the GUI.

 

 

        <node id="network" class="network" handle="PCI:0000:02:00.0">
         <description>Ethernet controller</description>
         <product>TN9510 10GBase-T/NBASE-T Ethernet Adapter</product>
         <vendor>Tehuti Networks Ltd.</vendor>
         <physid>0</physid>
         <businfo>pci@0000:02:00.0</businfo>
         <version>00</version>
         <width units="bits">64</width>
         <clock units="Hz">33000000</clock>
         <configuration>
          <setting id="latency" value="0" />
         </configuration>
         <capabilities>
          <capability id="msi" >Message Signalled Interrupts</capability>
          <capability id="pm" >Power Management</capability>
          <capability id="pciexpress" >PCI Express</capability>
          <capability id="bus_master" >bus mastering</capability>
          <capability id="cap_list" >PCI capabilities listing</capability>
         </capabilities>
         <resources>
          <resource type="memory" value="f0100000-f010ffff" />
         </resources>
        </node>
 

        <node id="network" claimed="true" class="network" handle="PCI:0000:05:00.0">
         <description>Ethernet interface</description>
         <product>RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller</product>
         <vendor>Realtek Semiconductor Co., Ltd.</vendor>
         <physid>0</physid>
         <businfo>pci@0000:05:00.0</businfo>
         <logicalname>eth0</logicalname>
         <version>06</version>
         <serial>[REMOVED]</serial>
         <size units="bit/s">1000000000</size>
         <capacity>1000000000</capacity>
         <width units="bits">64</width>
         <clock units="Hz">33000000</clock>
         <configuration>
          <setting id="autonegotiation" value="on" />
          <setting id="broadcast" value="yes" />
          <setting id="driver" value="r8169" />
          <setting id="driverversion" value="2.3LK-NAPI" />
          <setting id="duplex" value="full" />
          <setting id="firmware" value="rtl8168e-3_0.0.4 03/27/12" />
          <setting id="latency" value="0" />
          <setting id="link" value="yes" />
          <setting id="multicast" value="yes" />
          <setting id="port" value="MII" />
          <setting id="slave" value="yes" />
          <setting id="speed" value="1Gbit/s" />
         </configuration>
         <capabilities>
          <capability id="pm" >Power Management</capability>
          <capability id="msi" >Message Signalled Interrupts</capability>
          <capability id="pciexpress" >PCI Express</capability>
          <capability id="msix" >MSI-X</capability>
          <capability id="vpd" >Vital Product Data</capability>
          <capability id="bus_master" >bus mastering</capability>
          <capability id="cap_list" >PCI capabilities listing</capability>
          <capability id="ethernet" />
          <capability id="physical" >Physical interface</capability>
          <capability id="tp" >twisted pair</capability>
          <capability id="mii" >Media Independant Interface</capability>
          <capability id="10bt" >10Mbit/s</capability>
          <capability id="10bt-fd" >10Mbit/s (full duplex)</capability>
          <capability id="100bt" >100Mbit/s</capability>
          <capability id="100bt-fd" >100Mbit/s (full duplex)</capability>
          <capability id="1000bt" >1Gbit/s</capability>
          <capability id="1000bt-fd" >1Gbit/s (full duplex)</capability>
          <capability id="autonegotiation" >Auto-negotiation</capability>
         </capabilities>
         <resources>
          <resource type="irq" value="42" />
          <resource type="ioport" value="d000(size=256)" />
          <resource type="memory" value="f0004000-f0004fff" />
          <resource type="memory" value="f0000000-f0003fff" />
         </resources>
        </node>

 

 

 

It won't work unless the appropriate driver is loaded. Is there Linux support for that model?

On 3/10/2018 at 5:34 PM, John_M said:

It won't work unless the appropriate driver is loaded. Is there Linux support for that model?

Good question I'm having a hard time finding an official answer to It seems some have got it to work.