Strega Posted March 16, 2018 Share Posted March 16, 2018 4 hours ago, Hoopster said: FYI - for those with the Loading /bzroot...ok hanging issue when booting normally (no GUI or Safe mode) with unRAID 6.5.0 there is an apparent fix in the discussion linked below. It appears all of us with the issue so far have the ASRock C236 WSI motherboard. For two of us, the "fix" has worked and we can boot now in "normal" mode. Thanks to @gamephreak for discovering BIOS tweaks that made a difference. Make that 3 of us, the fix works for me too. Quote Link to comment
bonienl Posted March 16, 2018 Share Posted March 16, 2018 7 hours ago, Squid said: Is it by design now ( @bonienl ) that every time you go to the Plugins page a check for updates is performed, regardless of the Setting to never check automatically? Prior behavior was when set to never check, the plugin page also wouldn't check automatically. No, this is a bug Will be corrected in the next version. Quote Link to comment
DZMM Posted March 16, 2018 Share Posted March 16, 2018 @bonienl there's a bug with changing the size of VM images via the GUI Quote Link to comment
limetech Posted March 16, 2018 Author Share Posted March 16, 2018 17 minutes ago, DZMM said: @bonienl there's a bug with changing the size of VM images via the GUI @eschultz will take care of this. Quote Link to comment
theGrok Posted March 16, 2018 Share Posted March 16, 2018 (edited) I upgraded to 6.5 with no problems at first. Yesterday, my windows VM started freezing. I tried to shut it down and could not. I did a force stop and restarted my server. When it came back, my cache drive showed Unmountable: No File System. I had backups of mostly everything, so I formatted the cache, restored my appdata, libvirt, and vdisks. Everything was back up and running smoothly. This morning while updating the windows VM (the vdisk backup was quite a bit older). It froze again. I checked the log and saw call traces and btrfs errors. Fix Common problems also reports: Mar 16 05:53:34 Medserver root: Fix Common Problems: Error: Unable to write to cacheMar 16 05:53:34 Medserver root: Fix Common Problems: Error: Unable to write to Docker Image I do not know whether it is just a coincidence that it happened after the upgrade or if my SSD is going bad. SMART seems ok. Now that it has happened a second time, I thought I would post here. The first time I had the problem I posted here. My original diagnostics are attached in this thread: I have also attached my new diagnostics here. It is from after I formatted the cache drive and restored. Thank you for any assistance that you provide. medserver-diagnostics-20180316-0533.zip Edited March 16, 2018 by theGrok new infor. Quote Link to comment
EdgarWallace Posted March 16, 2018 Share Posted March 16, 2018 (edited) The update from 6.4.1 went well, however my ubuntu VM lost it's network connection (see picture). Any thoughts? Thanks a lot. Edited April 22, 2019 by EdgarWallace Quote Link to comment
yippy3000 Posted March 16, 2018 Share Posted March 16, 2018 On 3/15/2018 at 7:00 AM, michaelmcq said: I've upgraded and everything appears to be working fine, but I can't access any information about my dockers. I know they're running but when I visit the docker page I just get the spinner and eventually see this in chrome developer tools "http://192.168.1.114:8008/plugins/dynamix.docker.manager/include/DockerUpdate.php 504 (Gateway Time-out)" Tried in different browsers and the same, but not restarted the server yet (I have some maintenance to do in a few days so waiting for that, especially as the dockers are working) Plugins page works and various plugins have had updates I am having this exact same issue too. Dockers are working but I can't manage them anymore! Quote Link to comment
Cessquill Posted March 16, 2018 Share Posted March 16, 2018 7 minutes ago, yippy3000 said: I am having this exact same issue too. Dockers are working but I can't manage them anymore! Don't wish to offend, but have you restarted your server since upgrading? Quote Link to comment
bobbintb Posted March 16, 2018 Share Posted March 16, 2018 13 minutes ago, yippy3000 said: I am having this exact same issue too. Dockers are working but I can't manage them anymore! I've had similar issues with the docker and vm pages: Quote Link to comment
yippy3000 Posted March 16, 2018 Share Posted March 16, 2018 Just rebooted. It hung on reboot and dumped a diagnostic log. SSHed in and sent the reboot command and now things seem to be working but aeris-diagnostics-20180316-0936.zip Quote Link to comment
yippy3000 Posted March 16, 2018 Share Posted March 16, 2018 6 minutes ago, Cessquill said: Don't wish to offend, but have you restarted your server since upgrading? I did reboot after the upgrade. A second reboot hung but now things seem to working after I forced the reboot via SSH Quote Link to comment
Srengr Posted March 16, 2018 Share Posted March 16, 2018 (edited) I upgraded my two servers from 6.4.1 to 6.5.0. It seemed to go fine, but when I tried to copy some files from my PC (WIn 10) to an unRAID share (public), I got the old "access denied, you need permission..." error. I changed the share from Public to Private, and then back again-- no joy. Then I re-ran 'New Permissions' from the Tools menu and that fixed it. Any idea what caused it? Thanks, srengr Edited March 16, 2018 by Srengr Quote Link to comment
daemon9th Posted March 16, 2018 Share Posted March 16, 2018 1 hour ago, EdgarWallace said: The update from 6.4.1 went well, however my ubuntu VM lost it's network connection (see picture). Any thoughts? Thanks a lot. tower-diagnostics-20180316-1407.zip Hi, I had the same issue with an Ubuntu 16.04 VM. The interface I defined in /etc/network/interface had changed its name. Try "ip link show" command and then check configuration set in /etc/network/interfaces. I just had to modify the name, and reload network service (or reboot). 1 Quote Link to comment
michaelmcq Posted March 16, 2018 Share Posted March 16, 2018 1 hour ago, Cessquill said: Don't wish to offend, but have you restarted your server since upgrading? No offence taken :-). I rebooted, the docker and also "App Store" tabs worked after a reboot, they're now back to not working though. It flows through to the Dashboard too as I don't see my dockers or VMs under there (VM tab does load) I wonder if it's to do with checking for updates. (Although my Plugins page does work and shows updates) Quote Link to comment
trurl Posted March 16, 2018 Share Posted March 16, 2018 On 3/15/2018 at 8:00 AM, michaelmcq said: I've upgraded What version did you upgrade from? Quote Link to comment
michaelmcq Posted March 16, 2018 Share Posted March 16, 2018 1 minute ago, trurl said: What version did you upgrade from? 6.4 Quote Link to comment
cybrnook Posted March 16, 2018 Share Posted March 16, 2018 Loving the new NoVnc, very nice. Quote Link to comment
trurl Posted March 16, 2018 Share Posted March 16, 2018 29 minutes ago, michaelmcq said: 6.4 Do you have Fix Common Problems plugin? Quote Link to comment
bonienl Posted March 16, 2018 Share Posted March 16, 2018 43 minutes ago, michaelmcq said: No offence taken :-). I rebooted, the docker and also "App Store" tabs worked after a reboot, they're now back to not working though. It flows through to the Dashboard too as I don't see my dockers or VMs under there (VM tab does load) I wonder if it's to do with checking for updates. (Although my Plugins page does work and shows updates) Can you show a screenshot of the part which is not working? Quote Link to comment
local.bin Posted March 16, 2018 Share Posted March 16, 2018 I am in the same boat, I cannot see all my dockers in the docker containers area. Its just the ciicle, circling and nothing shows, even though dockers are running. Quote Link to comment
bonienl Posted March 16, 2018 Share Posted March 16, 2018 4 hours ago, EdgarWallace said: The update from 6.4.1 went well, however my ubuntu VM lost it's network connection (see picture). Any thoughts? Thanks a lot. tower-diagnostics-20180316-1407.zip Did not find anything specific. I compared your log with mine and there are no "real" differences. Does your VM settings still have br0 as selected network? Quote Link to comment
bonienl Posted March 16, 2018 Share Posted March 16, 2018 6 minutes ago, local.bin said: I am in the same boat, I cannot see all my dockers in the docker containers area. Its just the ciicle, circling and nothing shows, even though dockers are running. Do you have "advanced buttons" plugin installed? Quote Link to comment
local.bin Posted March 16, 2018 Share Posted March 16, 2018 Just now, bonienl said: Do you have "advanced buttons" plugin installed? No as the fix common problems plugins recommended removing it, which I did before upgrading. Quote Link to comment
bonienl Posted March 16, 2018 Share Posted March 16, 2018 9 minutes ago, local.bin said: No as the fix common problems plugins recommended removing it, which I did before upgrading. Check your internet connection. The loading may "appear" to hang when there is no internet connection. Quote Link to comment
local.bin Posted March 16, 2018 Share Posted March 16, 2018 (edited) 1 hour ago, bonienl said: Check your internet connection. The loading may "appear" to hang when there is no internet connection. Internet is fine and its the one window that lists the dockers that doesn't update for me, everyhting else looks fine. I am about to catch a flight, so downgraded to 6.4.1 for now until I have more time to debug. Great feature being able to downgrade not that i need it often, upgrades usually go without a hitch for me @bonienlCould it be my dual bonded lan if something has changed with networking? Edited March 16, 2018 by local.bin Question: Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.