March 26, 20188 yr If anyone can help that would be great! I am pulling what little hair I have out! Motherboard: X11SAT-F-O updated to BIOS they sent me 2.2c (I believe) CPU: E3-1275v6 RAM: 64gb DDR4 ECC 2400MHZ ram on supported list unRAID: 6.5.0 M.2 PCI Export port: Samsung EVO 960 EVO 500gb NVMe PCIE SLOT 2 Chelsio 10gbe NIC one port SFP+ PCIE SLOT 4 LSI HBA 8i card PCIE SLOT 5 LSI HBA 8i card So issues are most the times when boot the system it gets in a loop in BIO booting with CPU Initialization 32 then reboots. Sometimes if I turn off power then try it will boot. Has become a HUGE pain in the butt! I am not sure what issue is. Could it be number of PCIE lanes needed? Since CPU is 16. I am not sure what I can do if this is issue? Maybe get a 16i HBA card?
March 26, 20188 yr Community Expert 1 hour ago, rmilyard said: Could it be number of PCIE lanes needed? No, besides the 16 CPU lanes you also have PCH lanes, , looks like a hardware problem, possibly the board, does it do the same without all the addon cards?
March 26, 20188 yr Author 1 hour ago, johnnie.black said: No, besides the 16 CPU lanes you also have PCH lanes, , looks like a hardware problem, possibly the board, does it do the same without all the addon cards? So it booted without cards. Then added them back in one at a time and booted. Now getting stuck at 32. Took all cards out and back to same issue without cards! Driving me nuts!
March 27, 20188 yr Author Well after much testing things out I think it is the PSU. The 2U FSP 700watt in case might be issue. I have a 500watt ATX laying around. I plug it into just the 24pin and it boots fine! So guess need to find a new PSU for this Silverstone RM316 case.
Archived
This topic is now archived and is closed to further replies.