March 27, 20188 yr Hello, my system is in version 6.5 and does not start the Array anymore. I have two 2tb iron wolf HDs being one for data and one for parity and 2 300gb sas HDs for caching. It was all working more than 20 days, I ran a test of the application Ransomware Protection that worked perfectly and after restarting the system it did not start the Array anymore. I would appreciate some help. tw-nas-diagnostics-20180327-0753.zip
March 27, 20188 yr Community Expert Looks like your array is not set to auto-start. What happens when you try to start it?
March 27, 20188 yr Author 10 minutes ago, trurl said: Looks like your array is not set to auto-start. What happens when you try to start it? he don't. He start the process, but never end. I left running for 8 hours and nothing. The system don't freeze, but the "array starting" bottom message don't change. Now i start the array im secure mode and star running a parity check. When finish i repost. Edited March 27, 20188 yr by Danilo Faria
March 27, 20188 yr Community Expert Your syslog only covers a few seconds after boot. I'm not sure but it looks like you may have tried to start it in maintenance mode. Is that true?
March 27, 20188 yr Author 1 hour ago, trurl said: Your syslog only covers a few seconds after boot. I'm not sure but it looks like you may have tried to start it in maintenance mode. Is that true? yes. Just for test. This is the log from now. Stay the message "array starting mounting Disks" tw-nas-diagnostics-20180327-1224.zip
March 27, 20188 yr Author apparently is a problem on Rclone Plugin. after remove't the array star ok. Thanks for the help.
Archived
This topic is now archived and is closed to further replies.