August 9, 201015 yr I tried replacing an old 200gb ata hdd with a 500gb WD sata drive, as soon as i start the array to let the drive rebuild from parity my server hangs, i can't refresh neither can i telnet to the server. Would it be safe to restart the server using the reset button? screenshot : http://www.imagebam.com/image/f1a42592262122
August 9, 201015 yr I tried replacing an old 200gb ata hdd with a 500gb WD sata drive, as soon as i start the array to let the drive rebuild from parity my server hangs, i can't refresh neither can i telnet to the server. Would it be safe to restart the server using the reset button? screenshot : http://www.imagebam.com/image/f1a42592262122 That would seem to be your only choice if you cannot telnet to the server.
August 9, 201015 yr Author i used my backup of my flashdrive i've made earlier today to try again without succes. So i connected my new 500gb drive to my e-sata connector on the outside of my computer using an E-SATA to SATA cable. This time it is working and the drive is being rebuild as we speak. It must've been a bad sata controller slot then.
August 9, 201015 yr i used my backup of my flashdrive i've made earlier today to try again without succes. So i connected my new 500gb drive to my e-sata connector on the outside of my computer using an E-SATA to SATA cable. This time it is working and the drive is being rebuild as we speak. It must've been a bad sata controller slot then. Or a bad/loose connection.
Archived
This topic is now archived and is closed to further replies.