snake382 Posted April 8, 2018 Share Posted April 8, 2018 Hey all, I will go to change my material soon (M/B + CPU etc..) and is there anything special to do before with unraid? Or if I just put my usb stick with unraid on my new tower? Thanks for your help. Quote Link to comment
JorgeB Posted April 8, 2018 Share Posted April 8, 2018 Usually it's plug'n play. Quote Link to comment
snake382 Posted April 8, 2018 Author Share Posted April 8, 2018 ok may be just a change of ip address on my box saw that currently I am ip fixed and suddenly I would not have the same address mac? Quote Link to comment
JorgeB Posted April 8, 2018 Share Posted April 8, 2018 That would depend on your lan config if any adjustments need to be made, you can use the same IP. Quote Link to comment
BRiT Posted April 8, 2018 Share Posted April 8, 2018 Nothing special required but it is always a good idea to do the following first: Perform a Parity Check on old system to ensure state of array Print out configuration of array drives on old system to use as reference shoukd anything go wrong Perform SMART short tests on drives to have known state before moving of drives After above steps complete do a controlled shutdown of array. Quote Link to comment
snake382 Posted April 8, 2018 Author Share Posted April 8, 2018 2 hours ago, BRiT said: Nothing special required but it is always a good idea to do the following first: Perform a Parity Check on old system to ensure state of array Print out configuration of array drives on old system to use as reference shoukd anything go wrong Perform SMART short tests on drives to have known state before moving of drives After above steps complete do a controlled shutdown of array. OK thanks for you recommandations Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.