bonzovt Posted April 9, 2018 Share Posted April 9, 2018 I have a 4 x 1 Gig ethernet card, BCM5709. Does anyone know if it is support? When I boot up with this plugged in, my onboard NIC isn't active. In System Devices I see that unRAID recognizes the Broadcom Limited NetXtreme II Gig Ethernet, but under network settings I don't see any new ports available. If I power down, remove card, it boots up fine with onboard Eth working properly. Quote Link to comment
JorgeB Posted April 9, 2018 Share Posted April 9, 2018 Please post the diagnostics with the NIC installed. Quote Link to comment
bonzovt Posted April 9, 2018 Author Share Posted April 9, 2018 i took the card out to get the server back up. will try again tomorrow and grab diagnostics while installed. Quote Link to comment
bonzovt Posted April 24, 2018 Author Share Posted April 24, 2018 @johnnie.black sorry it took so long, finally got around to it. attached the diagnostics. interestingly enough, it also seems like after i remove the card and boot up, i still don't have network access. it isn't until i reboot again a second time after the Intel NIC card was removed that it finally starts working again the way it was. unserver-diagnostics-20180424-1552.zip Quote Link to comment
JorgeB Posted April 25, 2018 Share Posted April 25, 2018 NIC is detected and a driver loaded, if it's not working possible a driver (or NIC) problem . Quote Link to comment
bonzovt Posted April 27, 2018 Author Share Posted April 27, 2018 @johnnie.black if a driver problem, is there a way to update the driver that unRAID uses? Quote Link to comment
JorgeB Posted April 27, 2018 Share Posted April 27, 2018 You'd need to ask LT, try another Linux distro and if it works check what driver it's using. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.