Hi Guys,

I recently migrated my unRAID to another box. The PCIe USB 3.0 Controller worked in the other box, however after migrating it, attached devices aren't seen by unRAID  under unassigned devices or in the KVM options like it used to. Here's what system devices reveals:

 

[1b73:1100] 02:00.0 USB controller: Fresco Logic FL1100 USB 3.0 Host Controller (rev 10)

 

Here is the complete IOMMU group info.

IOMMU group 12:	[8086:3a40] 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1
				[8086:3a48] 00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5
				[8086:3a4a] 00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6
				[1b73:1100] 02:00.0 USB controller: Fresco Logic FL1100 USB 3.0 Host Controller (rev 10)
				[8086:10d3] 03:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
				[8086:10d3] 04:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection

Not sure what steps need to be done to get it working. I looked around on the unRAID forums but the only threads I found were for passing through a controller. Any help is much appreciated. Thanks.

Edited April 15, 20188 yr by Joseph
Solved

The diagnostics would be the best to see if a driver is being loaded for it.

22 hours ago, Squid said:

The diagnostics would be the best to see if a driver is being loaded for it.

done... see attached

 

Edited April 15, 20188 yr by Joseph

Driver's being loaded

02:00.0 USB controller [0c03]: Fresco Logic FL1100 USB 3.0 Host Controller [1b73:1100] (rev 10)
	Subsystem: Fresco Logic FL1100 USB 3.0 Host Controller [1b73:1100]
	Kernel driver in use: xhci_hcd

Did you connect the power to the board?

8 hours ago, Squid said:

Driver's being loaded

Did you connect the power to the board?

 

Ummm..... Doh!  marking issue as solved.