(Solved) Devices won't mount on PCIe USB 3.0 Controller after migration


Recommended Posts

Hi Guys,

I recently migrated my unRAID to another box. The PCIe USB 3.0 Controller worked in the other box, however after migrating it, attached devices aren't seen by unRAID  under unassigned devices or in the KVM options like it used to. Here's what system devices reveals:

 

[1b73:1100] 02:00.0 USB controller: Fresco Logic FL1100 USB 3.0 Host Controller (rev 10)

 

Here is the complete IOMMU group info.

IOMMU group 12:	[8086:3a40] 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1
				[8086:3a48] 00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5
				[8086:3a4a] 00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6
				[1b73:1100] 02:00.0 USB controller: Fresco Logic FL1100 USB 3.0 Host Controller (rev 10)
				[8086:10d3] 03:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
				[8086:10d3] 04:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection

Not sure what steps need to be done to get it working. I looked around on the unRAID forums but the only threads I found were for passing through a controller. Any help is much appreciated. Thanks.

Edited by Joseph
Solved
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.