Joseph Posted April 14, 2018 Share Posted April 14, 2018 (edited) Hi Guys, I recently migrated my unRAID to another box. The PCIe USB 3.0 Controller worked in the other box, however after migrating it, attached devices aren't seen by unRAID under unassigned devices or in the KVM options like it used to. Here's what system devices reveals: [1b73:1100] 02:00.0 USB controller: Fresco Logic FL1100 USB 3.0 Host Controller (rev 10) Here is the complete IOMMU group info. IOMMU group 12: [8086:3a40] 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 [8086:3a48] 00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 [8086:3a4a] 00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 [1b73:1100] 02:00.0 USB controller: Fresco Logic FL1100 USB 3.0 Host Controller (rev 10) [8086:10d3] 03:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection [8086:10d3] 04:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection Not sure what steps need to be done to get it working. I looked around on the unRAID forums but the only threads I found were for passing through a controller. Any help is much appreciated. Thanks. Edited April 15, 2018 by Joseph Solved Quote Link to comment
Squid Posted April 14, 2018 Share Posted April 14, 2018 The diagnostics would be the best to see if a driver is being loaded for it. Quote Link to comment
Joseph Posted April 15, 2018 Author Share Posted April 15, 2018 (edited) 22 hours ago, Squid said: The diagnostics would be the best to see if a driver is being loaded for it. done... see attached Edited April 15, 2018 by Joseph Quote Link to comment
Squid Posted April 15, 2018 Share Posted April 15, 2018 Driver's being loaded 02:00.0 USB controller [0c03]: Fresco Logic FL1100 USB 3.0 Host Controller [1b73:1100] (rev 10) Subsystem: Fresco Logic FL1100 USB 3.0 Host Controller [1b73:1100] Kernel driver in use: xhci_hcd Did you connect the power to the board? Quote Link to comment
Joseph Posted April 15, 2018 Author Share Posted April 15, 2018 8 hours ago, Squid said: Driver's being loaded Did you connect the power to the board? Ummm..... Doh! marking issue as solved. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.