sch1308 Posted April 20, 2018 Share Posted April 20, 2018 (edited) I'm getting an "exited with preempt_count 1" error on my ipmi card. it will boot to the dashboard if I have it to not mount array on startup but as soon as I select to start the array I get the message. I am using an ssd for a cache drive. thanks. Edited April 20, 2018 by sch1308 Quote Link to comment
JorgeB Posted April 20, 2018 Share Posted April 20, 2018 Are you using a SAT2-MV8 controller? They are known to crash with more recent kernels and some disks. Quote Link to comment
sch1308 Posted April 20, 2018 Author Share Posted April 20, 2018 Here is the ebay listing for the box, according to the seller it has sat2-mv8 cards in it. Funny because it's worked fine for a year up until yesterday. eBay listing.pdf Quote Link to comment
JorgeB Posted April 20, 2018 Share Posted April 20, 2018 Any hardware or software change (like an unRAID update) can trigger the issue, you can try disconnecting some devices to try and identify the culprit, and if it's just a few connect those on the onboards ports instead, but best option for the future would be an upgrade. Quote Link to comment
sch1308 Posted April 20, 2018 Author Share Posted April 20, 2018 would the h310's from dell be compatible with my motherboard or should I be looking for a new mobo/cpu/ram combo upgrade? Also I'll try to downgrade to 6.4 and see if that helps. Thanks for the tips. Quote Link to comment
JorgeB Posted April 20, 2018 Share Posted April 20, 2018 6 minutes ago, sch1308 said: would the h310's from dell be compatible with my motherboard If it's enough it *should* support two. Quote Link to comment
sch1308 Posted April 22, 2018 Author Share Posted April 22, 2018 ran the troubleshooting mode on fix common problems and attached them. ill disconnect all three sata cards and see it if will boot with just the 6 onboard drives. unraid-diagnostics-20180421-1845.zipFCPsyslog_tail.txt Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.