August 13, 201015 yr Board Info Manufacturer: Zotac Form factor: mini-ITX Chipset: Intel H55 SATA Ports: 6 CPU Socket: LGA 1156 Memory Type: DDR3 1066/1333 Onboard LAN: 10/100/1000Mbps PCI Express x16: 1 My setup Motherboard: Zotac H55ITX-A-E CPU: Intel Core i3 530 Memory: 2GB (2x1GB) Corsair XMS3 DDR3 unRAID Drive: SanDisk Cruzer Micro 8GB unRAID Storage: Western Digital Caviar Green 1.5TB (WD15EADS) x 3 Notes Setting a flash drive as the boot device: Go to the 'Boot' screen in the bios. Select 'Hard Disk Drives' (3rd Option). Reorder the drives so that the 1st drive is your flash drive. Return to the previous screen and select 'Boot Device Priority'. The 1st boot device will now be the flash drive. If you had not completed the first steps this screen would have shown another drive and you are unable to select a boot device other than the first drive chosen on the 'Hard Disk Drives' screen. Results Data Transfer Speed (Gigabit): 20-30MB/s Parity Check Speed: 72MB/s I have just ran a parity check on this board, the syslog is attached. For those checking it I started the parity check around 22:40. syslog.txt
August 13, 201015 yr Your final Parity Check speed is not 95MB/s. It is ~ 72MB/s (72217K/s). This is taken directly from your syslog: Aug 13 06:21:35 Tower kernel: md: sync done. time=20288sec rate=72217K/sec
August 13, 201015 yr Author Your final Parity Check speed is not 95MB/s. It is ~ 72MB/s (72217K/s). This is taken directly from your syslog: Aug 13 06:21:35 Tower kernel: md: sync done. time=20288sec rate=72217K/sec Sorry I hadn't checked the syslog. I just looked at the speed at the start of the sync before letting it run over night.
Archived
This topic is now archived and is closed to further replies.