Hi, I am not sure what happened but recently I find that all my VMs are getting the wrong IP address from another domain. My home network is 192.168.1.XX (DHCP server is my router = 192.168.1.1). But the VMs are getting address range like 192.168.122.XX sometimes 192.168.128.XX.

 

In network Settings -> routing table I have these:

IPV4    default    192.168.1.1 via br0

IPV4    192.168.1.0/24    br0

IPV4    192.168.122.0/24    virbr0

 

I think the virbr0 could be the problem but when i click the delete icon, it just won't let me.

 

Could someone please kindly assist.

 

Edit: added the network settings screenshots.

 

Thanks

 

Edit: 

Edited May 6, 20188 yr by fliptoback

Choose br0 in the network Bridge setting in the VM template and you should get an IP from your router. 

6 minutes ago, saarg said:

Choose br0 in the network Bridge setting in the VM template and you should get an IP from your router. 

 

Thanks Saarg. I already have br0 enabled in the VM settings but it is still getting the wrong IP address.

 

 

Try to re-apply the settings of your VMs.

9 hours ago, bonienl said:

Try to re-apply the settings of your VMs.

 

Thanks for reply. I have done that and even rebooted unraid to no avail. :(

I am having some of the same things here. With a bad address. 192.168.1.1/255 is the main address pole .

But on my vm thats running windows 10 and it keeps getting address 192 168.122.216. Anythoughs of fixing this

 

Thanks Again John

2 hours ago, John Graham said:

on my vm thats running windows 10 and it keeps getting address 192 168.122.216.

 

On 5/6/2018 at 5:53 AM, saarg said:

Choose br0 in the network Bridge setting in the VM template and you should get an IP from your router. 

 

thanks but i dont have that here ... i will show you what i have ....  any help here i would love ... need to get me VM back in the same address set

 

Is "enable bridging" set to yes in your network settings as shown in the first post?

I have it all a mess now ... i would like to give each there own ip address. how should  it be setup i always have problems with some programs use the servers address and a port number and others gete a address with not problems ... our playong around in the setting after asking for help they are sll on the same (server address) any thoughs 

 

thanks again