[Support] binhex - Krusader


Recommended Posts

On 1/10/2020 at 5:26 PM, rragu said:

I checked the entry for each bookmark and made sure the checkbox in the screenshot above is UNchecked. And I have Lock Toolbar Positions turned on.

 

Still no luck. Every time I restart the docker, I go back to having only a row of folder icons with no text.

 

Did this get solved or does anyone have a solution? I am having the exact same problem described by these two users and so far I have tried those steps.

Link to comment
  • 2 weeks later...

Hello, I am unable to use this to delete an sql database that was left behind when I deleted nextcloud and mariadb. I have tried to find a solution and just cant figure it out. It says only "nobody" has the authority.

Any help would be wonderful. running 6.9.2. 

Pretty newbie too.

Link to comment
1 hour ago, Asteel said:

Hello, I am unable to use this to delete an sql database that was left behind when I deleted nextcloud and mariadb. I have tried to find a solution and just cant figure it out.

 

See the Recommended Post at the top of this page.  That will allow you to delete any file on the system since you will than have root privileges.

  • Thanks 1
Link to comment
1 minute ago, Frank1940 said:

 

See the Recommended Post at the top of this page.  That will allow you to delete any file on the system since you will than have root privileges.

kk thank you I will look again.

Link to comment
On 10/12/2019 at 3:04 PM, Frank1940 said:

The problem was that in 6.8.0-rc1  I could not access the the Flash Drive ( boot drive) from Krusader.   The reason being that Limetech has changed the permission to the flash drive when it is mounted in the version.  The only way in this version (and all future versions) to access the drive is through SMB or as user 'root'.  (Understand that they are insistent that they are not going to change.)  Currently, Krusader is being run as user 'nobody'.

 

For anyone else looking for an answer, the answer is "YES".  All you have to do is edit the Krusader Docker and change the PUID and PGID to that for the 'root' user.  It is currently set for the 'nobody' user.   On my system, the 'root' PUID is 0 and PGID is 0.  

 

I did run some tests and I did not find any problems after making the changes.

 

OMG hours..... You are my hero lol! Thank you so much. I didnt even notice this at the top until @Frank1940suggested. Thank you both!

Link to comment
  • 2 weeks later...

So I can't figure it out Krusader just stopped and will not stat up " Execution error Server error" I deleted the container and image. redownloaded and still got errors?

 

Pulling image: binhex/arch-krusader:latest
IMAGE ID [1584543365]: Pulling from binhex/arch-krusader. 
IMAGE ID [ae8bad35e085]: Pulling fs layer. Downloading 100% of 263 B. Verifying Checksum. Download complete. Extracting. Pull complete. 
IMAGE ID [6bc503260a9b]: Pulling fs layer. Downloading 100% of 3 KB. Verifying Checksum. Download complete. Extracting. Pull complete. 
IMAGE ID [ff3d0022ca4c]: Pulling fs layer. Downloading 100% of 656 KB. Verifying Checksum. Download complete. Extracting. Pull complete. 
IMAGE ID [85aa5e1255ae]: Pulling fs layer. Downloading 100% of 5 KB. Download complete. Extracting. Pull complete. 
IMAGE ID [8bacc57869e2]: Pulling fs layer. Downloading 100% of 200 MB. Verifying Checksum. Download complete. Extracting. Pull complete. 
IMAGE ID [ec6f6c69a3f8]: Pulling fs layer. Downloading 100% of 257 B. Verifying Checksum. Download complete. Extracting. Pull complete. 
IMAGE ID [1500e8724f76]: Pulling fs layer. Downloading 100% of 3 KB. Download complete. Extracting. Pull complete. 
IMAGE ID [126e5351561a]: Pulling fs layer. Downloading 100% of 2 KB. Verifying Checksum. Download complete. Extracting. Pull complete. 
IMAGE ID [6d3a32195c50]: Pulling fs layer. Downloading 100% of 7 KB. Verifying Checksum. Download complete. Extracting. Pull complete. 
IMAGE ID [d063dd4313f2]: Pulling fs layer. Downloading 100% of 223 MB. Verifying Checksum. Download complete. Extracting. Pull complete. 
IMAGE ID [e7056b8d6ffa]: Pulling fs layer. Downloading 100% of 3 KB. Verifying Checksum. Download complete. Extracting. Pull complete. 
IMAGE ID [142d66edd625]: Pulling fs layer. Downloading 100% of 1 KB. Verifying Checksum. Download complete. Extracting. Pull complete. 
IMAGE ID [b418ca599391]: Pulling fs layer. Downloading 100% of 170 MB. Verifying Checksum. Download complete. Extracting. Pull complete. 
Status: Downloaded newer image for binhex/arch-krusader:latest

TOTAL DATA PULLED: 593 MB

Command:
root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name='Krusader' --net='bridge' --privileged=true -e TZ="America/Chicago" -e HOST_OS="Unraid" -e 'TEMP_FOLDER'='/config/krusader/tmp' -e 'WEBPAGE_TITLE'='Server Vader' -e 'VNC_PASSWORD'='' -e 'UMASK'='000' -e 'PUID'='0' -e 'PGID'='0' -p '5900:6080/tcp' -v '/mnt/':'/Unraid':'rw,slave' -v '/mnt/user/appdata/kde/':'/nobody/.kde':'rw' -v '/mnt/disks':'/Unassigned':'rw' -v '/boot/':'/Flash':'rw' -v '/mnt/user/appdata/binhex-krusader':'/config':'rw' 'binhex/arch-krusader' 
52ae088c434497cd886102e6518333e6be685d0e586580330773da08a9b149c9
/usr/bin/docker: Error response from daemon: driver failed programming external connectivity on endpoint Krusader (54ad302b760c34afb4011205dcc5deabbb2f367d5b560213d38c6ba6e7af312c): Error starting userland proxy: listen tcp 0.0.0.0:5900: bind: address already in use.

The command failed.

 

Link to comment
11 hours ago, Seven7527 said:

Error starting userland proxy: listen tcp 0.0.0.0:5900: bind: address already in use.

you have something running already on that port on the host side, either change the port for the container thats conflicting to something else, or change the port on the host side for krusader so it doesnt conflict.

Link to comment

Hi,  I'm having trouble with unpacking 'password protected' rars.
Basically it sits in testing archive mode and there is no indication that it's waiting for a password nor a dialog box.
Is there a tutorial or info on how to configure settings for this? My google searches turned up empty.
 

Link to comment
  • 1 month later...

Hi All & @binhex,

 

Trying to run Krusader, which has been working fine for years, and now I get a noVNC error when launching.

Attached is the error message and the various logs.

Oh, and tried uninstalling an re-installing and it did not help.

 

Thanks!!!

 

start_error_issue.gif.9961452e95dcdadc66a9e594519559de.gif

 

Spoiler

Created by...
___. .__ .__
\_ |__ |__| ____ | |__ ____ ___ ___
| __ \| |/ \| | \_/ __ \\ \/ /
| \_\ \ | | \ Y \ ___/ > <
|___ /__|___| /___| /\___ >__/\_ \
\/ \/ \/ \/ \/
https://hub.docker.com/u/binhex/

2021-06-27 20:52:31.485734 [info] System information Linux ed1e7d2c2282 5.10.28-Unraid #1 SMP Wed Apr 7 08:23:18 PDT 2021 x86_64 GNU/Linux
2021-06-27 20:52:31.514451 [info] OS_ARCH defined as 'x86-64'
2021-06-27 20:52:31.542398 [info] PUID defined as '000'
2021-06-27 20:52:31.573415 [info] PGID defined as '000'
2021-06-27 20:52:31.610736 [info] UMASK defined as '000'
2021-06-27 20:52:31.638644 [info] Permissions already set for volume mappings
2021-06-27 20:52:31.667453 [info] TEMP_FOLDER defined as '/config/krusader/tmp'
2021-06-27 20:52:31.700699 [info] Deleting files in /tmp (non recursive)...
2021-06-27 20:52:31.727527 [info] Starting Supervisor...
2021-06-27 20:52:31,888 INFO Included extra file "/etc/supervisor/conf.d/novnc.conf" during parsing
2021-06-27 20:52:31,888 INFO Set uid to user 0 succeeded
2021-06-27 20:52:31,891 INFO supervisord started with pid 7
2021-06-27 20:52:32,892 INFO spawned: 'start' with pid 61
2021-06-27 20:52:32,893 INFO reaped unknown pid 8 (exit status 0)
2021-06-27 20:52:32,899 DEBG 'start' stdout output:
[info] /config/home/.config folder storing user general settings already exists, skipping copy
[info] Creating soft link from /config/home/.config to /home/nobody/.config...

2021-06-27 20:52:32,900 INFO success: start entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2021-06-27 20:52:32,903 DEBG 'start' stdout output:
[info] /config/home/.icons folder storing user general settings already exists, skipping copy
[info] Creating soft link from /config/home/.icons to /home/nobody/.icons...

2021-06-27 20:52:32,906 DEBG 'start' stdout output:
[info] /config/home/.local folder storing user general settings already exists, skipping copy
[info] Creating soft link from /config/home/.local to /home/nobody/.local...

2021-06-27 20:52:32,909 DEBG 'start' stdout output:
[info] /config/home/.themes folder storing user general settings already exists, skipping copy
[info] Creating soft link from /config/home/.themes to /home/nobody/.themes...

2021-06-27 20:52:32,915 DEBG 'start' stderr output:
cp: cannot stat '/config/krusader/.config/': No such file or directory

2021-06-27 20:52:32,916 DEBG 'start' stderr output:
cp: cannot stat '/config/krusader/.local/': No such file or directory
2021-06-27 20:52:32,916 DEBG 'start' stderr output:


2021-06-27 20:52:35,958 DEBG 'start' stderr output:

New 'ed1e7d2c2282:0 ()' desktop is ed1e7d2c2282:0

Starting applications specified in /home/nobody/.vnc/xstartup
Log file is /home/nobody/.vnc/ed1e7d2c2282:0.log


2021-06-27 20:52:36,024 DEBG 'start' stdout output:
ObRender-Message: Unable to load the theme 'Shiki-Brave'
ObRender-Message: Falling back to the default theme 'Clearlooks'

2021-06-27 20:52:36,135 DEBG 'start' stderr output:
WebSocket server settings:
- Listen on :6080

2021-06-27 20:52:36,135 DEBG 'start' stderr output:
- Web server. Web root: /usr/share/webapps/novnc
- No SSL/TLS support (no cert file)

2021-06-27 20:52:36,135 DEBG 'start' stderr output:
- proxying from :6080 to localhost:5900

2021-06-27 20:52:39,978 DEBG 'start' stdout output:
[info] tint2 not running

2021-06-27 20:52:39,992 DEBG 'start' stderr output:
tint2: Using glib slice allocator (default). Run tint2 with environment variable G_SLICE=always-malloc in case of strange behavior or crashes

2021-06-27 20:52:39,995 DEBG 'start' stderr output:
tint2: xRandr: Found crtc's: 1

2021-06-27 20:52:39,995 DEBG 'start' stderr output:
[1;34mtint2: xRandr: Linking output VNC-0 with crtc 0, resolution 1024x768, DPI 96[0m
tint2: No XSETTINGS manager, tint2 uses config option 'launcher_icon_theme'.
tint2: Loading config file: /home/nobody/.config/tint2/theme/tint2rc

2021-06-27 20:52:39,995 DEBG 'start' stderr output:
tint2: real transparency on... depth: 32

2021-06-27 20:52:39,999 DEBG 'start' stderr output:
tint2: panel items: TSC
tint2: Systray composited rendering on
tint2: nb monitors 1, nb monitors used 1, nb desktops 4
[1;34mtint2: panel 1 uses scale 1 [0m

2021-06-27 20:52:40,007 DEBG 'start' stderr output:
tint2: Kernel uevent interface initialized...

2021-06-27 20:52:40,010 DEBG 'start' stderr output:
tint2: systray window 8388621

2021-06-27 20:52:40,010 DEBG 'start' stderr output:
[1;32mtint2: systray started[0m

2021-06-27 20:52:49,021 WARN received SIGTERM indicating exit request
2021-06-27 20:52:49,021 DEBG killing start (pid 61) with signal SIGTERM
2021-06-27 20:52:49,021 INFO waiting for start to die
2021-06-27 20:52:50,022 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 140153243932944 for <Subprocess at 140153243932176 with name start in state STOPPING> (stdout)>
2021-06-27 20:52:50,022 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 140153243932800 for <Subprocess at 140153243932176 with name start in state STOPPING> (stderr)>
2021-06-27 20:52:50,022 INFO stopped: start (terminated by SIGTERM)
2021-06-27 20:52:50,022 DEBG received SIGCHLD indicating a child quit

 

 

This is the Installation text:

root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker create --name='binhex-krusader' --net='bridge' --privileged=true -e TZ="America/New_York" -e HOST_OS="Unraid" -e 'TEMP_FOLDER'='/config/krusader/tmp' -e 'WEBPAGE_TITLE'='Tower' -e 'VNC_PASSWORD'='' -e 'UMASK'='000' -e 'PUID'='000' -e 'PGID'='000' -p '6080:6080/tcp' -v '/mnt/user':'/media':'rw' -v '/mnt/remotes/192.168.69.240_black_hole/':'/UNASSIGNED':'rw,slave' -v '/boot/':'/FLASH':'rw' -v '/mnt/cache/appdata/binhex-krusader':'/config':'rw' 'binhex/arch-krusader'

ff310e57f7441946724d3990a7c83d129beae3935009d20454874c97526374be

The command finished successfully!

 

 

Edited by DarkTower
forgot text
Link to comment
8 hours ago, DarkTower said:

Hi All & @binhex,

 

Trying to run Krusader, which has been working fine for years, and now I get a noVNC error when launching.

Attached is the error message and the various logs.

Oh, and tried uninstalling an re-installing and it did not help.

 

Thanks!!!

 

start_error_issue.gif.9961452e95dcdadc66a9e594519559de.gif

 

  Reveal hidden contents

Created by...
___. .__ .__
\_ |__ |__| ____ | |__ ____ ___ ___
| __ \| |/ \| | \_/ __ \\ \/ /
| \_\ \ | | \ Y \ ___/ > <
|___ /__|___| /___| /\___ >__/\_ \
\/ \/ \/ \/ \/
https://hub.docker.com/u/binhex/

2021-06-27 20:52:31.485734 [info] System information Linux ed1e7d2c2282 5.10.28-Unraid #1 SMP Wed Apr 7 08:23:18 PDT 2021 x86_64 GNU/Linux
2021-06-27 20:52:31.514451 [info] OS_ARCH defined as 'x86-64'
2021-06-27 20:52:31.542398 [info] PUID defined as '000'
2021-06-27 20:52:31.573415 [info] PGID defined as '000'
2021-06-27 20:52:31.610736 [info] UMASK defined as '000'
2021-06-27 20:52:31.638644 [info] Permissions already set for volume mappings
2021-06-27 20:52:31.667453 [info] TEMP_FOLDER defined as '/config/krusader/tmp'
2021-06-27 20:52:31.700699 [info] Deleting files in /tmp (non recursive)...
2021-06-27 20:52:31.727527 [info] Starting Supervisor...
2021-06-27 20:52:31,888 INFO Included extra file "/etc/supervisor/conf.d/novnc.conf" during parsing
2021-06-27 20:52:31,888 INFO Set uid to user 0 succeeded
2021-06-27 20:52:31,891 INFO supervisord started with pid 7
2021-06-27 20:52:32,892 INFO spawned: 'start' with pid 61
2021-06-27 20:52:32,893 INFO reaped unknown pid 8 (exit status 0)
2021-06-27 20:52:32,899 DEBG 'start' stdout output:
[info] /config/home/.config folder storing user general settings already exists, skipping copy
[info] Creating soft link from /config/home/.config to /home/nobody/.config...

2021-06-27 20:52:32,900 INFO success: start entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2021-06-27 20:52:32,903 DEBG 'start' stdout output:
[info] /config/home/.icons folder storing user general settings already exists, skipping copy
[info] Creating soft link from /config/home/.icons to /home/nobody/.icons...

2021-06-27 20:52:32,906 DEBG 'start' stdout output:
[info] /config/home/.local folder storing user general settings already exists, skipping copy
[info] Creating soft link from /config/home/.local to /home/nobody/.local...

2021-06-27 20:52:32,909 DEBG 'start' stdout output:
[info] /config/home/.themes folder storing user general settings already exists, skipping copy
[info] Creating soft link from /config/home/.themes to /home/nobody/.themes...

2021-06-27 20:52:32,915 DEBG 'start' stderr output:
cp: cannot stat '/config/krusader/.config/': No such file or directory

2021-06-27 20:52:32,916 DEBG 'start' stderr output:
cp: cannot stat '/config/krusader/.local/': No such file or directory
2021-06-27 20:52:32,916 DEBG 'start' stderr output:


2021-06-27 20:52:35,958 DEBG 'start' stderr output:

New 'ed1e7d2c2282:0 ()' desktop is ed1e7d2c2282:0

Starting applications specified in /home/nobody/.vnc/xstartup
Log file is /home/nobody/.vnc/ed1e7d2c2282:0.log


2021-06-27 20:52:36,024 DEBG 'start' stdout output:
ObRender-Message: Unable to load the theme 'Shiki-Brave'
ObRender-Message: Falling back to the default theme 'Clearlooks'

2021-06-27 20:52:36,135 DEBG 'start' stderr output:
WebSocket server settings:
- Listen on :6080

2021-06-27 20:52:36,135 DEBG 'start' stderr output:
- Web server. Web root: /usr/share/webapps/novnc
- No SSL/TLS support (no cert file)

2021-06-27 20:52:36,135 DEBG 'start' stderr output:
- proxying from :6080 to localhost:5900

2021-06-27 20:52:39,978 DEBG 'start' stdout output:
[info] tint2 not running

2021-06-27 20:52:39,992 DEBG 'start' stderr output:
tint2: Using glib slice allocator (default). Run tint2 with environment variable G_SLICE=always-malloc in case of strange behavior or crashes

2021-06-27 20:52:39,995 DEBG 'start' stderr output:
tint2: xRandr: Found crtc's: 1

2021-06-27 20:52:39,995 DEBG 'start' stderr output:
[1;34mtint2: xRandr: Linking output VNC-0 with crtc 0, resolution 1024x768, DPI 96[0m
tint2: No XSETTINGS manager, tint2 uses config option 'launcher_icon_theme'.
tint2: Loading config file: /home/nobody/.config/tint2/theme/tint2rc

2021-06-27 20:52:39,995 DEBG 'start' stderr output:
tint2: real transparency on... depth: 32

2021-06-27 20:52:39,999 DEBG 'start' stderr output:
tint2: panel items: TSC
tint2: Systray composited rendering on
tint2: nb monitors 1, nb monitors used 1, nb desktops 4
[1;34mtint2: panel 1 uses scale 1 [0m

2021-06-27 20:52:40,007 DEBG 'start' stderr output:
tint2: Kernel uevent interface initialized...

2021-06-27 20:52:40,010 DEBG 'start' stderr output:
tint2: systray window 8388621

2021-06-27 20:52:40,010 DEBG 'start' stderr output:
[1;32mtint2: systray started[0m

2021-06-27 20:52:49,021 WARN received SIGTERM indicating exit request
2021-06-27 20:52:49,021 DEBG killing start (pid 61) with signal SIGTERM
2021-06-27 20:52:49,021 INFO waiting for start to die
2021-06-27 20:52:50,022 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 140153243932944 for <Subprocess at 140153243932176 with name start in state STOPPING> (stdout)>
2021-06-27 20:52:50,022 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 140153243932800 for <Subprocess at 140153243932176 with name start in state STOPPING> (stderr)>
2021-06-27 20:52:50,022 INFO stopped: start (terminated by SIGTERM)
2021-06-27 20:52:50,022 DEBG received SIGCHLD indicating a child quit

 

 

This is the Installation text:

root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker create --name='binhex-krusader' --net='bridge' --privileged=true -e TZ="America/New_York" -e HOST_OS="Unraid" -e 'TEMP_FOLDER'='/config/krusader/tmp' -e 'WEBPAGE_TITLE'='Tower' -e 'VNC_PASSWORD'='' -e 'UMASK'='000' -e 'PUID'='000' -e 'PGID'='000' -p '6080:6080/tcp' -v '/mnt/user':'/media':'rw' -v '/mnt/remotes/192.168.69.240_black_hole/':'/UNASSIGNED':'rw,slave' -v '/boot/':'/FLASH':'rw' -v '/mnt/cache/appdata/binhex-krusader':'/config':'rw' 'binhex/arch-krusader'

ff310e57f7441946724d3990a7c83d129beae3935009d20454874c97526374be

The command finished successfully!

 

 

i think from memory this is a browser related issue, try a different browser, or incognito mode for your browser, if it fixes it then clear down cookies and try it again.

Link to comment

Hi @binhex,

 

Cleared all of the cookies as suggested, but still kept getting the error.

So I uninstalled and removed everything, even in appdata, and reinstalled.

Works like a champ again!

As always your work and assistance are greatly appreciated!!!! (Beers 🍻 to come at Christmas :) )

 

As a quick aside, who would be the best to hit up regarding server networking?

ALL I want to do is get the default (eth0) onto a new 10Gbe card I have installed, and keep the onboards as extras (?failovers?).

Thanks!

J

Link to comment
54 minutes ago, TechMed said:

As a quick aside, who would be the best to hit up regarding server networking?

ALL I want to do is get the default (eth0) onto a new 10Gbe card I have installed, and keep the onboards as extras (?failovers?).

 

Start a new thread in the 'General Support' sub-forum and pose your question there.  Be sure to include hardware details and describe exactly what you would like to do.

Link to comment
On 5/30/2018 at 7:22 PM, Frank1940 said:

 

Please NO!!!!  You logon onto the server with a user name and password.  When you logon, you have root privileges.  You  can log off from the GUI by clicking on a button if you wish to prevent access to this Docker.  Why introduce another username and password to get to a file manager  which has far less potential for doing damage than the 'popup' terminal built into the GUI that has absolutely no protection on it?  

Um, in case someone else finds the ip:port of your krusader docker??

Link to comment
44 minutes ago, Hikakiller said:

Um, in case someone else finds the ip:port of your krusader docker??

 

41 minutes ago, trurl said:

Are you exposing that to the internet somehow?

 

(By the way, it was a question to a quote from three years ago.) I seem to recall that you could get to it from the LAN side of the firewall if you have a malicious LAN user.  I thought there was a password option at one time but I can't seem to fine where to set it up now.   I simply decided it was easier to start and stop the Krusader Docker rather than getting involved with another password situation.

Edited by Frank1940
Link to comment

I am on the :test version of krusader and noticed it got an update.

 

After updating my taskbar disappeared so that if a copy window pops up and I click away from it, I can't figure out how to pull it up again?

 

I will just move back to the latest branch but figured I would let you know.

Link to comment
On 8/22/2019 at 8:48 PM, AgentXXL said:

I'm having issues with this method for extracting files from a rar set. For some reason the extract starts fine, but randomly it will stop popping up a Information --- Krusader error dialog saying 'access denied' to the file within the rar set. Sometimes it seems to work with no issues, but most of the time it fails on a rar set that's larger than 4GB in size, for example one containing an iso file.

 

My Krusader log entries from an attempt made just a few minutes ago....

 

2019-08-22 13:19:53,732 DEBG 'start' stderr output:
kdeinit5: Got EXEC_NEW '/usr/lib/qt/plugins/kf5/kio/file.so' from launcher.
kdeinit5: preparing to launch '/usr/lib/qt/plugins/kf5/kio/file.so'

 

2019-08-22 13:19:53,740 DEBG 'start' stderr output:
kdeinit5: Got EXEC_NEW '/usr/lib/qt/plugins/kio_krarc.so' from launcher.
kdeinit5: preparing to launch '/usr/lib/qt/plugins/kio_krarc.so'

 

2019-08-22 13:20:28,795 DEBG 'start' stderr output:
kdeinit5: PID 225 terminated.

 

This has happened with many different rar sets in the past but I got around it by copying the rar set to another system and extracting there, then copy the extracted files back to my unRAID. Note that this occurs whether I try to extract to the array, to the cache or to an unassigned device (SSD or hard drive).

 

Any suggestions?

 

I am also having this problem, large RAR files +4GB.

Link to comment
5 hours ago, mikeyosm said:

I am also having this problem, large RAR files +4GB.

 

I have had this issue as well but tracked it to a memory issue. The memory usage of the container would grow until it caused the whole system to run out of memory and generally cause the system to crash.

 

So I set some memory limits for the container to stop that but still, it seems to read the entire file into memory before opening the file for some reason.

 

I have just given up opening archives in krusader and instead use windows on another system via SMB and they open up right away without an issue.

 

Can also use the CLI archive tools to read the files without an issue.

Edited by TexasUnraid
Link to comment
5 hours ago, TexasUnraid said:

 

I have had this issue as well but tracked it to a memory issue. The memory usage of the container would grow until it caused the whole system to run out of memory and generally cause the system to crash.

 

So I set some memory limits for the container to stop that but still, it seems to read the entire file into memory before opening the file for some reason.

 

I have just given up opening archives in krusader and instead use windows on another system via SMB and they open up right away without an issue.

 

Can also use the CLI archive tools to read the files without an issue.

 

11 hours ago, mikeyosm said:

I am also having this problem, large RAR files +4GB.

 

As @TexasUnraid said, the CLI tools have no issue. So for now I select the Krusader Docker container and open a console vs the web GUI. From the console it's easy enough to use 'unrar e myfile.rar' which has worked perfectly every time I've needed it. I'm curious though - as I'm still running unrar from the Krusader container, you would think that using the console and the CLI tools would have the same memory issue but they don't. At least there's a simple workaround and it's rarely needed anyhow.

 

I'll also occasionally use Windows and the old standby QuickPAR to try and repair a rar set if the unRAID version of the par tools didn't work.

 

  • Like 1
Link to comment
  • 1 month later...

I posted this question in General Support first because I'm unconvinced it's a Krusader issue, but was told to post here by a mod so . . .

I changed the PUID & PGID to 0 as in the recommended post a long time ago, so should be root (?) However the permissions error seems to indicate I don't have the privileges.

 

My initial question was about not being able to copy files to an unassigned USB stick, but to keep it simple, nor can I create a folder on that USB stick in Krusader - I get the error:

Error -- Krusader - ROOT PRIVILEGES

Could not make folder /2_Unraid_Unassigned/Kingston128/test

 

The permissions on the Kingston USB stick are:

Owner and Group: Can View & Modify Content,

Others: Can Only View Content

User:nobody

Group: users

 

So it looks like I'm somehow not root even though the top banner of the Krusader window clearly states 'ROOT PRIVILEGES' ?

Totally confused - which isn't unfamiliar :) Anyone help?

 

 

Link to comment
1 hour ago, awediohead said:

Totally confused - which isn't unfamiliar :) Anyone help?

As I understand it:

 

Go to 'Edit'  of the container. 

 

Look at this:  

image.thumb.png.2753d52743a54eb66ab58e744b38be23.png

 

The portion circled in a Red is the Unraid file directory that Krusader can work within.    The one circled in Green is what that path is called inside the Docker Container.   (Think that the Docker container is a VM that only runs Krusader.    A defined 'Host container path' is the only way that VM can access anything outside of the VM environment.)

 

PS:  I don't believe this is the default Host container path.  I seem to recall that it is /mnt/user    I modified it so that I could work on the disk shares  BUT I understand the issue of data corruption if one uses Krusader (or any other  file manager) to move files between disk shares and user shares!!!

 

By the way, you can add in a 'Host Path 3:' to point to another place in the Unraid file structure...

  • Thanks 1
Link to comment

Thanks Frank.

I just deleted and reinstalled the Krusader docker to start fresh and followed Ed's video here 

UnRaid & Moving Data (Part 2) Krusader

 

I've triple checked I've done it exactly so my start up Krusader panels look exactly like Ed's with:

1_Unraid_Shares

2_Unraid_Unassigned

3_Unraid_Remotes

 

at the top of each panel. With this mapping Ed just points 1_Unraid_Shares to /mnt/user/ He does NOT change the PUID or PGID to 0 - but I'd already experimented with returning those to the defaults and back to 0 before I reinstalled the docker - makes no difference to my particular issue.

I get exactly the same result when trying to copy anything to the USB drive - effectively a permissions error that I can't write to the USB drive - which is why I thought it was perhaps more to do with Unassigned Devices than Krusader and originally posted the question to General Support.

I will try another USB drive - though I bought this 128GB drive specifically for this task and all my others are much smaller. It does work on other machines - checked that already :) Any other ideas very welcome thanks

EDIT: OK so just reformatted the 128GB drive to MBR and msdos FAT and now it's working as expected - so NOT a Krusader problem. Sorry to have wasted your time - in my defence I didn't think it was and only posted here because a moderator said I should.

Doesnt answer the question why this didn't work with the drive formatted to either exFAT or HFS+, but again I assume that's an unassigned devices issue unless someone can tell me different?

Edited by awediohead
further question
Link to comment
  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.