Harro Posted May 24, 2018 Share Posted May 24, 2018 (edited) I have one of my disk that threw me a power cycle count error this morning. Should I be worried about this? Drive is over a year old and hasn't had any other errors. I am running an extended smart test now. Just thought I would see what the common thoughts are about this error since this is the first time I have ever seen this error after years using Unraid. Edited May 25, 2018 by Harro Quote Link to comment
JorgeB Posted May 25, 2018 Share Posted May 25, 2018 Please post the SMART report (or the diags). Quote Link to comment
Harro Posted May 25, 2018 Author Share Posted May 25, 2018 4 hours ago, johnnie.black said: Please post the SMART report (or the diags). I have attached the report, but I see no errors but the power cycle count, but you may have a better idea of what you are looking at in the report than I. Thanks tower-smart-20180525-0546.zip Quote Link to comment
JorgeB Posted May 25, 2018 Share Posted May 25, 2018 Power cycle count is not an error, just a counter, SMART looks fine, the only warning is about temp, the disk ran pretty close to max temp in the past: Current Temperature: 28 Celsius Power Cycle Min/Max Temperature: 23/38 Celsius Lifetime Min/Max Temperature: 14/59 Celsius Max is 60C and you should be nowhere near that, ideally under 40C, 45C max. Quote Link to comment
Harro Posted May 25, 2018 Author Share Posted May 25, 2018 Thanks Johjnie. Temp had been a problem in the past when I had array in a closet but since moving it about 6 months ago, highest temp has been 36. But summer is coming and will keep an eye on that. Thanks again Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.