May 27, 20188 yr This started from my recollection just a few days ago, and I can only think of a few things that changed, though do not see how this affects anything. The issue: Start server, array works. Go to LOG from the main server page. Just get a LOT of csrf_wrong token or whatever. Tons of them. After a while, haven't determined how long. the array just goes offline, disks are unmounted. and the WEBUI has sql errors (nothing specific that I can think of). If I click LOG, it loads empty. Cannot click REBOOT on the WEB GUI, so i click TERMINAL and type reboot. System reboots and sometime later will happen again. how can I try and diagnose this error. what is going on, what can I do to stop this?
May 27, 20188 yr Community Expert The wrong crsf token message means that you have a browser session to the unRAID GUI open from before your last reboot. You want to eliminate this as the flood of such messages can make it difficult to get anything useful from the logs. As to why you might be crashing I have no idea!
May 28, 20188 yr Author how can i get the logs right before it crashes. when i reboot logs are empty. it was running fine all day today. tried to sign into ombi. errored out and array went off line again. but it was running fine all day.
May 28, 20188 yr 22 minutes ago, Nyghthawk said: how can i get the logs right before it crashes. when i reboot logs are empty. Install the Fix Common Problems plugin, and enable diagnostic mode.
May 28, 20188 yr Author 2 hours ago, jonathanm said: Install the Fix Common Problems plugin, and enable diagnostic mode. i uninstalled that a few months ago as it caused excessive hd read. will reinstall. installed. where is diagnoatic mode? Okay I had the log window opened the WHOLE time, and it crashed. Under docker window it says Array must be started to view Docker containers. and at the bottom Array undefined So It crashed. This was happening a lot so I have a feeling this MIGHT be related May 27 21:48:15 Tower rcloneorig[6062]: 99us4spc7d99eqg2sci12nig08/2nj2gs9jhdca741rc8k7en4ieu348vqaf16hqajeac1gogt5q5e0/j0nbuedisbqn3klv1fe0j61ph4/tq102t0gf72sgghsp62br4vijtuijmcg6hsthjn8ft99vjavtacfncdpjstu16hsdjrcs57iq9i05889ij0gts7cgphi2adcd6a3jmmi2bbl1hbn3ag5fkj3f0ejshah: failed to cache object: write /.cache/rclone/cache-backend/gdrive-cache.db: no space left on device May 27 21:48:15 Tower rcloneorig[6062]: 99us4spc7d99eqg2sci12nig08/2nj2gs9jhdca741rc8k7en4ieu348vqaf16hqajeac1gogt5q5e0/j0nbuedisbqn3klv1fe0j61ph4/tq102t0gf72sgghsp62br4vijtuijmcg6hsthjn8ft99vjavtacfncdpjstu16hsdjrcs57iq9i05889ij0gts7cgphi2adcd6a3jmmi2bbl1hbn3ag5fkj3f0ejshah: (0/29192) error (chunk not found 0) response May 27 21:48:16 Tower rcloneorig[6062]: os7igc58qaijoosd6scbubb8ik/bsq590an1n6jcj0beebdh2avaeh9e5ohuuqpjm6u3vmuqb3gghvg/i6avv0vl2539mibsgmdpb3di32o8maleh25v8ehi6iuqajdm1oa6djd4dusfl29r190d5t9hs1ctv0146lhf68nm1rbnr8sln08kpe8: (24705041136/43209107998) error (chunk not found 24704450560) responseMay 27 21:48:17 Tower rcloneorig[6062]: Movies/Ferdinand (2017)/Ferdinand (2017) - [Remux-2160p][TrueHD 7.1][x265].mkv: ReadFileHandle.Read error: low level retry 1/10: EOF I will revert back to a different mount and see if that fixes my issues. Edited May 28, 20188 yr by Nyghthawk
May 28, 20188 yr 13 hours ago, Nyghthawk said: I will revert back to a different mount and see if that fixes my issues. Anything NOT mounted under /boot or /mnt will end up in memory, and the "no space left" message indicates you ran out of memory. Check your path names, ie. "/.cache" is NOT the cache device.
May 28, 20188 yr Author 6 minutes ago, bonienl said: Anything NOT mounted under /boot or /mnt will end up in memory, and the "no space left" message indicates you ran out of memory. Check your path names, ie. "/.cache" is NOT the cache device. it is mounted in /mnt/disks/<folder> as the guide here explained. I think it is cause I am using a CACHE drive is where the issues came up. when using PLEXDRIVE i have no problems. however, when I mounted the "old" mount, I mounted the un-cached, un-plexdrive version and API banned myself in about 10 minutes, so I am unable to try/test any further for another 24 hours =( i think it was the CACHE drive mount as the log errors went away (during quick tests) and the stream was playing without those memory leaks. EDIT: I don't know why rclone was writing to that directory,. Edited May 28, 20188 yr by Nyghthawk
Archived
This topic is now archived and is closed to further replies.