nudelta Posted May 31, 2018 Share Posted May 31, 2018 I apologize if this has been discussed before. I just installed unRaid and drives attached to my Sas card (RocketRAID 2680SGL) are not showing up. Is it a driver issue? Any help or knowledge on this matter would be greatly appreciated. Quote Link to comment
JonathanM Posted May 31, 2018 Share Posted May 31, 2018 unRAID doesn't deal well with RAID cards in general, go figure, it's UNraid, but if you can put the card in HBA mode somehow to let unraid manage the disks itself it may work. However... that card uses a marvell controller, which is just bad news in general for newer linux based systems. Bottom line, you would be much better off with LSI chipset based HBA cards, flashed to IT mode so the RAID part of the card is disabled. Quote Link to comment
S80_UK Posted May 31, 2018 Share Posted May 31, 2018 I had a 2680... Not a good experience. Binned it in the end. Support from HighPoint for other operating systems was also pretty patchy. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.