Wondering if my disk is going bad or if this has to do with a recent power outage


Recommended Posts

Advice is appreciated! I have 9,100 read errors on this disk...

 

Thanks!

smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.14.35-unRAID] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Green
Device Model:     WDC WD30EZRX-00DC0B0
Serial Number:    WD-WMC1T1274820
LU WWN Device Id: 5 0014ee 00378dbe0
Firmware Version: 80.00A80
User Capacity:    3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sun Jun  3 12:04:19 2018 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      ( 119)	The previous self-test completed having
					the read element of the test failed.
Total time to complete Offline 
data collection: 		(41520) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 417) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x70b5)	SCT Status supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   200   200   051    -    1548
  3 Spin_Up_Time            POS--K   189   183   021    -    5516
  4 Start_Stop_Count        -O--CK   100   100   000    -    47
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         -OSR-K   200   200   000    -    0
  9 Power_On_Hours          -O--CK   085   085   000    -    11531
 10 Spin_Retry_Count        -O--CK   100   253   000    -    0
 11 Calibration_Retry_Count -O--CK   100   253   000    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    45
192 Power-Off_Retract_Count -O--CK   200   200   000    -    26
193 Load_Cycle_Count        -O--CK   100   100   000    -    301196
194 Temperature_Celsius     -O---K   125   105   000    -    25
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   200   200   000    -    0
198 Offline_Uncorrectable   ----CK   200   200   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   ---R--   200   200   000    -    4
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      5  Comprehensive SMART error log
0x03       GPL     R/O      6  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa0-0xa7  GPL,SL  VS      16  Device vendor specific log
0xa8-0xb7  GPL,SL  VS       1  Device vendor specific log
0xbd       GPL,SL  VS       1  Device vendor specific log
0xc0       GPL,SL  VS       1  Device vendor specific log
0xc1       GPL     VS      93  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 489 (device log contains only the most recent 24 errors)
	CR     = Command Register
	FEATR  = Features Register
	COUNT  = Count (was: Sector Count) Register
	LBA_48 = Upper bytes of LBA High/Mid/Low Registers ]  ATA-8
	LH     = LBA High (was: Cylinder High) Register    ]   LBA
	LM     = LBA Mid (was: Cylinder Low) Register      ] Register
	LL     = LBA Low (was: Sector Number) Register     ]
	DV     = Device (was: Device/Head) Register
	DC     = Device Control Register
	ER     = Error register
	ST     = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 489 [8] occurred at disk power-on lifetime: 11497 hours (479 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 04 e8 00 00 8e 7e 6d 08 e0 00  Error: UNC 1256 sectors at LBA = 0x8e7e6d08 = 2390650120

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 04 e8 00 00 8e 7e 69 a8 e0 08     05:16:13.186  READ DMA EXT
  25 00 00 02 08 00 00 8e 7e 67 a0 e0 08     05:16:13.184  READ DMA EXT
  25 00 00 05 10 00 00 8e 7e 62 90 e0 08     05:16:13.178  READ DMA EXT
  25 00 00 02 08 00 00 8e 7e 60 88 e0 08     05:16:13.176  READ DMA EXT
  25 00 00 04 e8 00 00 8e 7e 5b a0 e0 08     05:16:13.170  READ DMA EXT

Error 488 [7] occurred at disk power-on lifetime: 11497 hours (479 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 05 40 00 00 8d f3 13 a8 e0 00  Error: UNC 1344 sectors at LBA = 0x8df313a8 = 2381517736

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 05 40 00 00 8d f3 0f f8 e0 08     05:15:23.435  READ DMA EXT
  25 00 00 02 80 00 00 8d f3 0d 78 e0 08     05:15:23.431  READ DMA EXT
  25 00 00 02 e0 00 00 8d f3 0a 98 e0 08     05:15:23.429  READ DMA EXT
  25 00 00 02 08 00 00 8d f3 08 90 e0 08     05:15:23.427  READ DMA EXT
  25 00 00 01 68 00 00 8d f3 07 28 e0 08     05:15:23.425  READ DMA EXT

Error 487 [6] occurred at disk power-on lifetime: 11497 hours (479 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 02 08 00 00 8d 65 54 b0 e0 00  Error: UNC 520 sectors at LBA = 0x8d6554b0 = 2372228272

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 02 08 00 00 8d 65 54 28 e0 08     05:14:29.735  READ DMA EXT
  25 00 00 04 d8 00 00 8d 65 4f 50 e0 08     05:14:29.731  READ DMA EXT
  25 00 00 02 08 00 00 8d 65 4d 48 e0 08     05:14:29.719  READ DMA EXT
  25 00 00 05 20 00 00 8d 65 48 28 e0 08     05:14:28.757  READ DMA EXT
  25 00 00 02 08 00 00 8d 65 46 20 e0 08     05:14:28.755  READ DMA EXT

Error 486 [5] occurred at disk power-on lifetime: 11497 hours (479 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 05 40 00 00 8d 3f f7 68 e0 00  Error: UNC 1344 sectors at LBA = 0x8d3ff768 = 2369779560

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 05 40 00 00 8d 3f f4 e8 e0 08     05:14:05.349  READ DMA EXT
  25 00 00 02 10 00 00 8d 3f f2 d8 e0 08     05:14:05.337  READ DMA EXT
  25 00 00 05 40 00 00 8d 3f ed 98 e0 08     05:14:05.275  READ DMA EXT
  25 00 00 01 b0 00 00 8d 3f eb e8 e0 08     05:14:05.209  READ DMA EXT
  25 00 00 05 40 00 00 8d 3f e6 a8 e0 08     05:14:05.155  READ DMA EXT

Error 485 [4] occurred at disk power-on lifetime: 11497 hours (479 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 05 40 00 00 8d 3f cd b8 e0 00  Error: UNC 1344 sectors at LBA = 0x8d3fcdb8 = 2369768888

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 05 40 00 00 8d 3f c8 88 e0 08     05:13:57.365  READ DMA EXT
  25 00 00 02 58 00 00 8d 3f c6 30 e0 08     05:13:57.363  READ DMA EXT
  25 00 00 05 40 00 00 8d 3f c0 f0 e0 08     05:13:57.305  READ DMA EXT
  35 00 00 01 60 00 00 8d 3f b8 c0 e0 08     05:13:57.300  WRITE DMA EXT
  25 00 00 04 c8 00 00 8d 3f bc 28 e0 08     05:13:57.286  READ DMA EXT

Error 484 [3] occurred at disk power-on lifetime: 11497 hours (479 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 05 30 00 00 8d 3f b8 c0 e0 00  Error: UNC 1328 sectors at LBA = 0x8d3fb8c0 = 2369763520

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 05 30 00 00 8d 3f b4 f0 e0 08     05:13:54.314  READ DMA EXT
  25 00 00 02 08 00 00 8d 3f b2 e8 e0 08     05:13:54.312  READ DMA EXT
  25 00 00 01 70 00 00 8d 3f b1 78 e0 08     05:13:54.311  READ DMA EXT
  25 00 00 05 40 00 00 8d 3f ac 38 e0 08     05:13:54.305  READ DMA EXT
  25 00 00 00 10 00 00 8d 3f ac 28 e0 08     05:13:54.305  READ DMA EXT

Error 483 [2] occurred at disk power-on lifetime: 11497 hours (479 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 02 08 00 00 8d 3e 9a 40 e0 00  Error: UNC 520 sectors at LBA = 0x8d3e9a40 = 2369690176

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 02 08 00 00 8d 3e 98 e0 e0 08     05:13:50.191  READ DMA EXT
  25 00 00 02 f8 00 00 8d 3e 95 e8 e0 08     05:13:50.177  READ DMA EXT
  25 00 00 02 00 00 00 8d 3e 93 e8 e0 08     05:13:50.176  READ DMA EXT
  25 00 00 02 08 00 00 8d 3e 91 e0 e0 08     05:13:50.175  READ DMA EXT
  25 00 00 02 80 00 00 8d 3e 8f 60 e0 08     05:13:50.168  READ DMA EXT

Error 482 [1] occurred at disk power-on lifetime: 11497 hours (479 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 02 88 00 00 8d 3e 70 48 e0 00  Error: UNC 648 sectors at LBA = 0x8d3e7048 = 2369679432

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 02 88 00 00 8d 3e 6f 38 e0 08     05:13:46.868  READ DMA EXT
  25 00 00 02 00 00 00 8d 3e 6d 38 e0 08     05:13:46.867  READ DMA EXT
  25 00 00 02 08 00 00 8d 3e 6b 30 e0 08     05:13:46.866  READ DMA EXT
  25 00 00 03 70 00 00 8d 3e 67 c0 e0 08     05:13:46.863  READ DMA EXT
  25 00 00 02 00 00 00 8d 3e 65 c0 e0 08     05:13:46.862  READ DMA EXT

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed: read failure       70%     11517         1483616232
# 2  Short offline       Completed without error       00%     11515         -
# 3  Extended offline    Completed without error       00%      1756         -
# 4  Short offline       Completed without error       00%      1748         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       258 (0x0102)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    25 Celsius
Power Cycle Min/Max Temperature:     20/27 Celsius
Lifetime    Min/Max Temperature:     18/45 Celsius
Under/Over Temperature Limit Count:   0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:      0/60 Celsius
Min/Max Temperature Limit:           -41/85 Celsius
Temperature History Size (Index):    478 (233)

Index    Estimated Time   Temperature Celsius
 234    2018-06-03 04:07    25  ******
 ...    ..( 20 skipped).    ..  ******
 255    2018-06-03 04:28    25  ******
 256    2018-06-03 04:29    24  *****
 ...    ..( 35 skipped).    ..  *****
 292    2018-06-03 05:05    24  *****
 293    2018-06-03 05:06    25  ******
 ...    ..(  5 skipped).    ..  ******
 299    2018-06-03 05:12    25  ******
 300    2018-06-03 05:13    24  *****
 ...    ..(  2 skipped).    ..  *****
 303    2018-06-03 05:16    24  *****
 304    2018-06-03 05:17    25  ******
 ...    ..(  5 skipped).    ..  ******
 310    2018-06-03 05:23    25  ******
 311    2018-06-03 05:24    24  *****
 ...    ..( 84 skipped).    ..  *****
 396    2018-06-03 06:49    24  *****
 397    2018-06-03 06:50    25  ******
 ...    ..(  5 skipped).    ..  ******
 403    2018-06-03 06:56    25  ******
 404    2018-06-03 06:57    24  *****
 ...    ..( 24 skipped).    ..  *****
 429    2018-06-03 07:22    24  *****
 430    2018-06-03 07:23    25  ******
 ...    ..(  6 skipped).    ..  ******
 437    2018-06-03 07:30    25  ******
 438    2018-06-03 07:31    24  *****
 ...    ..(  4 skipped).    ..  *****
 443    2018-06-03 07:36    24  *****
 444    2018-06-03 07:37    25  ******
 445    2018-06-03 07:38    24  *****
 ...    ..( 23 skipped).    ..  *****
 469    2018-06-03 08:02    24  *****
 470    2018-06-03 08:03    25  ******
 471    2018-06-03 08:04    24  *****
 ...    ..(  3 skipped).    ..  *****
 475    2018-06-03 08:08    24  *****
 476    2018-06-03 08:09    25  ******
 477    2018-06-03 08:10    24  *****
   0    2018-06-03 08:11    24  *****
   1    2018-06-03 08:12    24  *****
   2    2018-06-03 08:13    25  ******
   3    2018-06-03 08:14    25  ******
   4    2018-06-03 08:15    24  *****
 ...    ..(  3 skipped).    ..  *****
   8    2018-06-03 08:19    24  *****
   9    2018-06-03 08:20    25  ******
 ...    ..(  5 skipped).    ..  ******
  15    2018-06-03 08:26    25  ******
  16    2018-06-03 08:27    24  *****
 ...    ..(  2 skipped).    ..  *****
  19    2018-06-03 08:30    24  *****
  20    2018-06-03 08:31    25  ******
  21    2018-06-03 08:32    24  *****
  22    2018-06-03 08:33    24  *****
  23    2018-06-03 08:34    25  ******
 ...    ..(  2 skipped).    ..  ******
  26    2018-06-03 08:37    25  ******
  27    2018-06-03 08:38    24  *****
 ...    ..(  2 skipped).    ..  *****
  30    2018-06-03 08:41    24  *****
  31    2018-06-03 08:42    25  ******
 ...    ..(  9 skipped).    ..  ******
  41    2018-06-03 08:52    25  ******
  42    2018-06-03 08:53    24  *****
  43    2018-06-03 08:54    25  ******
 ...    ..(  9 skipped).    ..  ******
  53    2018-06-03 09:04    25  ******
  54    2018-06-03 09:05    24  *****
  55    2018-06-03 09:06    24  *****
  56    2018-06-03 09:07    24  *****
  57    2018-06-03 09:08    25  ******
 ...    ..(  3 skipped).    ..  ******
  61    2018-06-03 09:12    25  ******
  62    2018-06-03 09:13    24  *****
  63    2018-06-03 09:14    24  *****
  64    2018-06-03 09:15    24  *****
  65    2018-06-03 09:16    25  ******
 ...    ..(  4 skipped).    ..  ******
  70    2018-06-03 09:21    25  ******
  71    2018-06-03 09:22    24  *****
  72    2018-06-03 09:23    24  *****
  73    2018-06-03 09:24    25  ******
 ...    ..( 11 skipped).    ..  ******
  85    2018-06-03 09:36    25  ******
  86    2018-06-03 09:37    24  *****
  87    2018-06-03 09:38    25  ******
 ...    ..(  8 skipped).    ..  ******
  96    2018-06-03 09:47    25  ******
  97    2018-06-03 09:48    24  *****
  98    2018-06-03 09:49    25  ******
 ...    ..(  7 skipped).    ..  ******
 106    2018-06-03 09:57    25  ******
 107    2018-06-03 09:58    24  *****
 108    2018-06-03 09:59    24  *****
 109    2018-06-03 10:00    24  *****
 110    2018-06-03 10:01    25  ******
 ...    ..(  8 skipped).    ..  ******
 119    2018-06-03 10:10    25  ******
 120    2018-06-03 10:11    24  *****
 121    2018-06-03 10:12    25  ******
 ...    ..(  7 skipped).    ..  ******
 129    2018-06-03 10:20    25  ******
 130    2018-06-03 10:21    24  *****
 131    2018-06-03 10:22    24  *****
 132    2018-06-03 10:23    24  *****
 133    2018-06-03 10:24    25  ******
 ...    ..(  5 skipped).    ..  ******
 139    2018-06-03 10:30    25  ******
 140    2018-06-03 10:31    24  *****
 ...    ..( 15 skipped).    ..  *****
 156    2018-06-03 10:47    24  *****
 157    2018-06-03 10:48    25  ******
 158    2018-06-03 10:49    25  ******
 159    2018-06-03 10:50    25  ******
 160    2018-06-03 10:51    24  *****
 ...    ..( 14 skipped).    ..  *****
 175    2018-06-03 11:06    24  *****
 176    2018-06-03 11:07    25  ******
 177    2018-06-03 11:08    25  ******
 178    2018-06-03 11:09    24  *****
 179    2018-06-03 11:10    25  ******
 180    2018-06-03 11:11    25  ******
 181    2018-06-03 11:12    25  ******
 182    2018-06-03 11:13    24  *****
 ...    ..(  4 skipped).    ..  *****
 187    2018-06-03 11:18    24  *****
 188    2018-06-03 11:19    25  ******
 ...    ..(  5 skipped).    ..  ******
 194    2018-06-03 11:25    25  ******
 195    2018-06-03 11:26    24  *****
 ...    ..(  2 skipped).    ..  *****
 198    2018-06-03 11:29    24  *****
 199    2018-06-03 11:30    25  ******
 ...    ..(  6 skipped).    ..  ******
 206    2018-06-03 11:37    25  ******
 207    2018-06-03 11:38    24  *****
 208    2018-06-03 11:39    24  *****
 209    2018-06-03 11:40    24  *****
 210    2018-06-03 11:41    25  ******
 ...    ..( 22 skipped).    ..  ******
 233    2018-06-03 12:04    25  ******

SCT Error Recovery Control command not supported

Device Statistics (GP/SMART Log 0x04) not supported

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x0002  2            0  R_ERR response for data FIS
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0005  2            0  R_ERR response for non-data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x0008  2            0  Device-to-host non-data FIS retries
0x0009  2            4  Transition from drive PhyRdy to drive PhyNRdy
0x000a  2            3  Device-to-host register FISes sent due to a COMRESET
0x000b  2            0  CRC errors within host-to-device FIS
0x000f  2            0  R_ERR response for host-to-device data FIS, CRC
0x0012  2            0  R_ERR response for host-to-device non-data FIS, CRC
0x8000  4       140697  Vendor specific

 

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.