volume Posted June 4, 2018 Share Posted June 4, 2018 Hello I have open the case and check the cable, also i have run the SMART short self-test: Last SMART test result: Completed without error I have a also upload the diagnostics. Could you please advise me what to check? thanks! diagnostics-20180604-2201.zip Quote Link to comment
JorgeB Posted June 5, 2018 Share Posted June 5, 2018 Diagnostics are after rebooting, but parity looks fine so just re-sync it, if it happens again grab the diags before rebooting. Quote Link to comment
volume Posted June 6, 2018 Author Share Posted June 6, 2018 (edited) On 6/5/2018 at 9:51 AM, johnnie.black said: Diagnostics are after rebooting, but parity looks fine so just re-sync it, if it happens again grab the diags before rebooting. i have re-sync but the problem is still there. i grab the diagnostics if that helps. i also reboot it and start stop the array in the past i also had problems with HPA, if this helps a little bit. im starting to worry... Any help would be greatly appreciated! diagnostics-20180606-2235.zip Edited June 6, 2018 by volume Quote Link to comment
JorgeB Posted June 7, 2018 Share Posted June 7, 2018 10 hours ago, volume said: i have re-sync but the problem is still there. When? I don't see a parity sync in the log. You need to unassign parity, start the array, stop the array, re-assign parity and start the array to begin parity sync. Quote Link to comment
volume Posted June 7, 2018 Author Share Posted June 7, 2018 6 hours ago, johnnie.black said: When? I don't see a parity sync in the log. You need to unassign parity, start the array, stop the array, re-assign parity and start the array to begin parity sync. thanks! i just did the above steps and i start parity sync. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.