parked-orthodontist1156 Posted November 21, 2023 Share Posted November 21, 2023 On 10/27/2023 at 1:10 PM, Monetary5569 said: That's exactly right. The below solution works but not after reboot, I did what you said and it's working again, this is an Unraid bug. We should notify this. I should add some info - at ZeroTier network any docker services at Unraid host may be used without problem, but Unraid gui itself on 80 port need these operations after reboot. Quote Link to comment
Monetary5569 Posted November 27, 2023 Share Posted November 27, 2023 (edited) On 11/21/2023 at 4:54 PM, parked-orthodontist1156 said: I should add some info - at ZeroTier network any docker services at Unraid host may be used without problem, but Unraid gui itself on 80 port need these operations after reboot. Didn't try that far, but it makes sense because I have the problem with smb shares on unraid that I can't access if I don't do the workaround. Edited November 27, 2023 by Monetary5569 Quote Link to comment
Xcage Posted December 3, 2023 Share Posted December 3, 2023 Heya, Just stumbled upon support for Spikhalskiys Zerotier container , been using it (forever?) and it works , the latest 6.12 network changes are what changed the way unraid listens to interfaces therefore theres a need to add interfaces extra in network section to be able to get to unraid via ZeroTier or Tailscale VPN. Thank you Spikhalskiy , when 6.12 reboot issue which makes it necessary to re-add the interfaces extra will be fixed it will come back to "just" working as it was before Quote Link to comment
nmkd Posted December 13, 2023 Share Posted December 13, 2023 Does anyone know what command UnRAID runs when clicking Network Settings -> Interface Extra -> Apply? A bandaid solution would be to run this command daily or on every reboot or something. Quote Link to comment
captpower Posted December 30, 2023 Share Posted December 30, 2023 Hi Everyone any idea on how to delete/remove the unused networks I already deleted them from Appdata/..../networks.d but they still show in docker cli and Unraid network setting Thanks In Advance Quote Link to comment
mucflyer Posted January 29 Share Posted January 29 Hi all. I have issues with ZT container, no matter what I do it doesn't create network. Quote Link to comment
leaded-angora2954 Posted January 29 Share Posted January 29 4 minutes ago, mucflyer said: Hi all. I have issues with ZT container, no matter what I do it doesn't create network. Do you have enabled in Settings > Docker the following? "Host access to custom networks:" You should disable it, otherwise it won't create a network. Quote Link to comment
mucflyer Posted January 29 Share Posted January 29 1 minute ago, leaded-angora2954 said: Do you have enabled in Settings > Docker the following? "Host access to custom networks:" You should disable it, otherwise it won't create a network. Disabled already. Quote Link to comment
littlerm Posted March 14 Share Posted March 14 Hello, may I ask how to set a fixed IPv6 address, subnet mask, and DNS for ZT's virtual network card. Thanks Quote Link to comment
mauriceatkinson@btconnect. Posted March 15 Share Posted March 15 On 7/14/2023 at 5:48 PM, Vivent said: For anyone looking for a solution, I was able to connect to my unraid 6.12.2 from a phone on zerotier 1.10.6. Just go to settings -> Network Settings. In Routing Table section find your zerotier ip and copy interface name from gateway column. Paste the interface name into "Include listening interfaces" field under Interface Extra section, hit apply, and it should all be working. Not sure if anyone else has this problem but.. my config is as above but I find that whenever the unraid server is powered off or crashes I cannot get access to the unraid server via zerotier. According to my.zerotier.com the server is up and I can ping it. I have found that if I add a comma after the zerotier address in the include listening interfaces I can then access again remotely (until another reboot/crash). I would love to get this fixed. Quote Link to comment
Monetary5569 Posted March 27 Share Posted March 27 On 3/15/2024 at 8:34 AM, mauriceatkinson@btconnect. said: Not sure if anyone else has this problem but.. my config is as above but I find that whenever the unraid server is powered off or crashes I cannot get access to the unraid server via zerotier. According to my.zerotier.com the server is up and I can ping it. I have found that if I add a comma after the zerotier address in the include listening interfaces I can then access again remotely (until another reboot/crash). I would love to get this fixed. Yeah, it's still not fixed, they don't care a bit. Quote Link to comment
mauriceatkinson@btconnect. Posted April 21 Share Posted April 21 I have updatedto 6.12.10 and still the issue of not being able to connect via zerotier unless you add the comma in the listening interface exists. I am going to raise a support call and see if I can get this on the fixing radar. Quote Link to comment
Elmojo Posted May 9 Share Posted May 9 (edited) OK, got a real dumb Q, I think... I'm able to access individual dockers/services with no issue, using the managed IP:port with ZT on, from my phone. So how do I access the entire unraid dashboard? Just entering the IP comes up with an nginx error, and I don't know what the (or if) port would be for the main dashboard. How does this work? Or does it? EDIT: No one knows? I feel better! lol Edited May 10 by Elmojo Quote Link to comment
procedural-jetliner7270 Posted May 26 Share Posted May 26 On 1/29/2024 at 2:10 PM, mucflyer said: Disabled already. Hey, i have the same issue, it wont create the entry in the routing table. Did you get it working? Quote Link to comment
Elmojo Posted May 29 Share Posted May 29 Hey Dmitry, can we can a container update to v1.14 please? I'm speaking with ZT support, they are recommending that I update "all devices involved to v1.14 so we’re not fighting any already solved issues". I see that this docker is on v1.12 still. Quote Link to comment
scraejtp Posted July 7 Share Posted July 7 (edited) edit: Solving the issue slowly. A walkthrough on setting a VPS to essentially forward a domain to an Unraid box with Nginx would be helpful. Edited July 7 by scraejtp Quote Link to comment
poedenon Posted July 25 Share Posted July 25 (edited) does anyone know if the Version 7.0.0-beta fixes this issue? *update* I am referring to the being able to connect to NFS shares across the ZT network Edited July 25 by poedenon Quote Link to comment
Elmojo Posted July 25 Share Posted July 25 2 minutes ago, poedenon said: does anyone know if the Version 7.0.0-beta fixes this issue? Fixes what issue? Quote Link to comment
poedenon Posted July 25 Share Posted July 25 Good point, sorry about that. I am referring to being able to connect to NFS shares across the ZT network Quote Link to comment
sneville83 Posted July 28 Share Posted July 28 I have reviewed all the previous posts and unable to find one that allows me to access my unRaid server through the zeroTier Docker container. I have added the Docker network interface for as a listening interface, but still unable to access my unRaid server at all. I am able to ping the Container using the zeroTier IP Address, but get a timeout error when I try to access unRaid. Could someone please help me? I am willing to supply anything data you need. I am not looking to just access the unRaid webGUI, but also the network shares I have setup. Quote Link to comment
Elmojo Posted July 28 Share Posted July 28 9 minutes ago, sneville83 said: I have reviewed all the previous posts and unable to find one that allows me to access my unRaid server through the zeroTier Docker container. ..... I am not looking to just access the unRaid webGUI, but also the network shares I have setup. I asked the same question, and got no answers. I spoke to ZeroTier support about this, and they directed me to this support article: https://docs.zerotier.com/integrating-physical-networks/ I did not find it helpful, perhaps you will. If you get it figured out, please share! Quote Link to comment
strike Posted July 28 Share Posted July 28 What IP are your trying to reach unraid on, the zerotier IP og the unarid IP? Not a soultion to your issues, but set up Tailscale instead, it's very easy and just works. If you decide to try that I recomend the plugin rather then the docker contaier. As it can run without the array started as well. So you can still connect to your server even if the array and the docker service is down. 1 Quote Link to comment
Elmojo Posted July 28 Share Posted July 28 That does sound nice, and I may give it a shot for personal testing purposes. However, I'm using ZT for work, and all our client devices are already configured. It would be nontrivial to convert to TS, and convincing the owners to drop our ZT license and jump to another provider would also be a challenge. I need to use whatever they use, for ease of setup and compatibility. Quote Link to comment
strike Posted July 28 Share Posted July 28 2 minutes ago, Elmojo said: and convincing the owners to drop our ZT license and jump to another provider I can understand that would be a hard sell yes. Been some years sice i used zerotier, but talscale's subnetrouter and magic dns feautures are SO nice. With magic dns you can use hostnames instead of ip address. And with subnetrouter set up you can connect to devices which don't even have tailscale installed. Like printers and other devices it's hard to install clients on. I can't remember if zerotier has those features, but that is what made me install Tailscale. 1 Quote Link to comment
Elmojo Posted July 28 Share Posted July 28 Oh man, I may have to make the jump. That sounds pretty great. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.