Squazz Posted June 6, 2018 Share Posted June 6, 2018 (edited) Now this build is only starting. I might expand this post in the time to come. There's a lot I want to add to the the system, but I thought I'd start out with what I got. Also, I see people thinking about building a Ryzen setup, so here's my take on it. Also, I'm using a AMD 290X GPU, for those wondering if that's working ok. I'm no big photographer, so you'll have to bear with the images. But before we begin, a warning for future Ryzen builders out there: Quote Make ABSOLUTELY SURE that you are running the latest version of BOTH unRaid & the motherboard BIOS This cannot be stressed enough. It generated me a lot of headaches that I didn't update the BIOS to begin with before I did anything else. Also: Quote Disable C-states. You'll save yourself a lot of problems flipping that switch Lastly Quote Make sure your memory is not running too fast! I know, I know, Ryzen LOVES memory speeds. And were you building a normal desktop computer it would be fine to cram up the speed of your memory sticks. But with unRaid, and everything else where you want reliability, you don't want to go out of the spec for your memory controller. Here is the spec for the Ryzen 1700: https://en.wikichip.org/wiki/amd/ryzen_7/1700#Memory_controller For Dual Rank memory, the memory controller on the Ryzen 1700 is only supporting 2400Mhz. The kit I have, is dual rank memory. You can check out if your memory is dual or single rank here: https://www.reddit.com/r/Amd/comments/649ay8/ram_collection_thread_please_post_your_ram/ Ok, with that out of the way, onwards with the build! The system is at the moment rocking the following hardware. Basics CPU: Ryzen 7 1700 (65W) CPU Cooler: BeQuiet Pure Rock Motherboard: MSI MS-7A33 motherboard Ram: 16GB (2x 8GB 2400Mhz) PSU: Cooler Master MasterWatt 750 Case: Fractal Design Define R5 Raid drive: LSI 9201-8i GPU: MSI Radeon 290X 8Gb Drives: Parity: 2x 3TB WD Red Cache: 1x 128Gb 840 EVO Data: 2x 3TB WD Red, 4x 2TB WD Red, 2x 2Tb Seagate Hybrid Drive Unassigned / VM-drive: 1x 128Gb 840 PRO (This solved SO many bottlenecks!) It's a mouthful of drives, but they are what I had laying around (I have a bunch of 2Tb drives laying around still), and it seemed stupid to buy new 8Tb drives when I had well functioning drives at hand. The drives are placed physically in the order they are shown in unRaid. It makes it SO MUCH easier when something goes wrong. The Origins My first NAS was a "ReadyNas" ultra 4 plus, nothing wild, but it got me going. For the past 10 years I have had a gaming computer. It was gradually upgraded with various components. At some point I figured I might be able to build a NAS stonger and better than the ReadyNas I had at the moment. As parts was replaced in my main gaming PC, I had enough spare parts to build myself a mini-server based on a 2600K CPU. I first tried out a Windows Server build, using storage spaces, but in the end I got too irritated at it, and my wife got tired of all of my hardware lying around. All of the hardware was sold, and the setup I have now was bought, time to combine everything into one case and save both space and power. The main reason I chose unRaid was that I needed a way to gradually expand the array, one drive at the time. Power readings 190w - Startup peak 100w - Watching movie (all drives but one spun down) 130w - Idle (Win10 Desktop open) 170w - Light use (Wathing Netflix on win10 VM) 350w - Gaming Current state The server functions as my gaming machine as well as my NAS. Nothing more at the moment. I have the following planned for some time in the future: TV server - It's about time... pfSense router - will take some reconfiguring of the home network Kodi MySQL database - I only have one Kodi machine at the moment, but I have always wanted to set it up with a MySQL database Plex - Almost done with the movie setup. Music has logistical problems. Storage expansion - I'm soon gonna run out of space Invest in more RAM Windows Server VM with Windows Server Update Services - to control all updates of my different Windows machines. This is now handled by SteamCache as that fits my needs and can run in a docker There seems to be problems with SteamCahce and Windows Update. Stopped using StamCache for now Set up webserver Find a good music streaming service tun run in a docker (maybe Plex can get me covered here) Find a way to have VMs running in other rooms Find a way to start turned off VMs without going through the unRaid interface Do feel free to write me about ideas for what to set up next, as well as plugins that I might find usable Edited December 4, 2018 by Squazz Quote Link to comment
Squazz Posted June 6, 2018 Author Share Posted June 6, 2018 (edited) I will use this post to describe the software side of how I have everything set up. Unraid Plugins & Dockers - CA Auto Turbo Write Mode - Dynamix Auto Fan Control (My system is so quiet now) - Dynamix Cache Directories (Makes navigating foldes on the array faster, and possible without spinning up drives) - Dynamix S3 Sleep (Disabled now, never kicked into effect, gonna try to make this work at some time) - Dynamix SSD TRIM - Dynamix System Buttons - Dynamix System Statistics - Dynamix System Temperature - Tips and Tweaks (At little of this, and a little of that) - Recycle Bin (This one has saved me too many times) - Unassigned Devices (Used to move my VMs out of the cache, and unto an unassigned SSD) - unBALANCE (Perfect to move data between physical drives) - User Scripts (Used for Zenstates & automatic backups of VMs) - Nerd Pack (Used to install python) - Plex (Docker) - Binhex-Krusader (Docker) - MakeMKV (Docker) - SteamCacheBundle ( Docker) - Used for cache for Windows updates (I am the only gamer in the house) Plex plugins Agents to use Kodi / XBMC metadata: - XBMCnfoMoviesImporter - XBMCnfoTVImporter - Trakt Scrobbler Zenstates (Fixing the problem where gen1 Ryzen won't boost in unRaid) I had quite some problems with my speed and Cinebench score of my Ryzen 1700. I have made a post in General Support about this, but here is the post for your convenience. The first step is to use the plugin "TipsAndTweaks" to change the "CPU Scaling Guvenor" to "On Demand". In my case it was set to "Power Save" as default. This moved my from about 550 to 1170 in CineBench. A noticeable change. Looking at the at terminal with the following command, it was wasy to see that my Ryzen 1700 just wouldn't boost properly when using Cinebench: Quote watch -n 1 grep MHz /proc/cpuinfo To fix this Download zenstates from https://github.com/r4m0n/ZenStates-Linux/blob/master/zenstates.py Save the script in a share under the name zenstates.py (I chose /mnt/user/appdata) Use NerdPack to install python (Needed for executing the python script) I used the UserScripts plugin to set up this script. Running every time that my array starts. I got the script from @david279 Quote ### The 1700x only seems to support P0/1/2 ## P0 = 3.900GHz, 1.3500v /mnt/user/appdata/zenstates.py -p 0 -f 9C -d 8 -v 1C #Maximum power ## P1 = 3.600GHz, 1.3000v #/mnt/user/appdata/zenstates.py -p 1 -f 90 -d 8 -v 20 ## P2 = 2.200GHz, 0.8000v #/mnt/user/appdata/zenstates.py -p 2 -f 84 -d C -v 6A #BaseClock I only apply for P0 as that is the only state I'm interested in. The rest is up to CPU to downclock itself After all of these changes, CineBench score jumped from 550 to 1420. So I'd said everything worked out just fine Win10 VM related Steam Game files are on a separate share just for this. Most games runs as the administrator user. You'll have to map your share for that administrator user. Remember to map the share to the same drive-letter as your main-user has it. Dropbox, Google Drive & Blizzards Battle.NET These guys really don't want you to have your files on a network share. I created a 700Gb vDisk and assigned this one to my VM. Now it shows up as a perfectly normal drive in Windows. The vDisk is placed in a share with enough spare space. When this was set up, everything was set up as I would on any non-VM Win10 machine. Scrobbling Getting this working between different devices demands a little setup on every device / system used. Kodi: Plex: As mentioned earlier I use Trakt Scrobbler to scrobble between devices and keep Trakt updated with what I have watched. Make sure "Sync - Run every" is set to run at a fixed interval. I had to uncheck "Sync - Defer until server is idle", in order to make the sync run. It only takes 3 seconds for my setup anyway. Edited December 4, 2018 by Squazz 1 Quote Link to comment
Squazz Posted June 6, 2018 Author Share Posted June 6, 2018 (edited) Quote Edit: While the below information is still valid and passthrough ended up working, for some reason it was not stable enough for CounterStrike GO. I ended up using an old display-card as my primary GPU for unRaid, and could then passthrough my R9 290X without specifying the driver. This made everything a lot more stable. I had quite a lot of problems getting my GPU passthrough to work properly, so for reference is here the way my Win10 VM ended up being configured. I got a lot of help getting it working in this thread: But this was not enough. I still had problems with with extremely low framerates in games like League Of Legends. A little change here and there made it work in the end. One of the contributing factors to getting it to work, I think is the fact that I ended up stubbing an entire USB controller on the motherboard, and then just plug every USB device I had in there. Until I did that I had a lot of weird problems. I used the following Syslinux configuration: Quote default menu.c32 menu title Lime Technology, Inc. prompt 0 timeout 50 label unRAID OS menu default kernel /bzimage append vfio-pci.ids=1022:145c initrd=/bzroot pci-stub.ids=1002:67b0,1022:1457,1022:145c,1022:1455 label unRAID OS GUI Mode kernel /bzimage append initrd=/bzroot,/bzroot-gui label unRAID OS Safe Mode (no plugins, no GUI) kernel /bzimage append initrd=/bzroot unraidsafemode label unRAID OS GUI Safe Mode (no plugins) kernel /bzimage append initrd=/bzroot,/bzroot-gui unraidsafemode label Memtest86+ kernel /memtest And I have the following system devices Quote IOMMU group 0: [1022:1452] 00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe Dummy Host Bridge IOMMU group 1: [1022:1453] 00:01.3 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe GPP Bridge IOMMU group 2: [1022:1452] 00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe Dummy Host Bridge IOMMU group 3: [1022:1452] 00:03.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe Dummy Host Bridge IOMMU group 4: [1022:1453] 00:03.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe GPP Bridge IOMMU group 5: [1022:1453] 00:03.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe GPP Bridge IOMMU group 6: [1022:1452] 00:04.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe Dummy Host Bridge IOMMU group 7: [1022:1452] 00:07.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe Dummy Host Bridge IOMMU group 8: [1022:1454] 00:07.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Internal PCIe GPP Bridge 0 to Bus B IOMMU group 9: [1022:1452] 00:08.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe Dummy Host Bridge IOMMU group 10: [1022:1454] 00:08.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Internal PCIe GPP Bridge 0 to Bus B IOMMU group 11: [1022:790b] 00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 59) [1022:790e] 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 51) IOMMU group 12: [1022:1460] 00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 0 [1022:1461] 00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 1 [1022:1462] 00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 2 [1022:1463] 00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 3 [1022:1464] 00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 4 [1022:1465] 00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 5 [1022:1466] 00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 6 [1022:1467] 00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 7 IOMMU group 13: [1022:43b9] 03:00.0 USB controller: Advanced Micro Devices, Inc. [AMD] Device 43b9 (rev 02) [1022:43b5] 03:00.1 SATA controller: Advanced Micro Devices, Inc. [AMD] Device 43b5 (rev 02) [1022:43b0] 03:00.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 43b0 (rev 02) [1022:43b4] 16:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02) [1022:43b4] 16:01.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02) [1022:43b4] 16:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02) [1022:43b4] 16:03.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02) [1022:43b4] 16:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02) [1022:43b4] 16:08.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02) [10ec:8168] 21:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15) [1b21:2142] 25:00.0 USB controller: ASMedia Technology Inc. Device 2142 IOMMU group 14: [1002:67b0] 26:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Hawaii XT / Grenada XT [Radeon R9 290X/390X] [1002:aac8] 26:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Hawaii HDMI Audio [Radeon R9 290/290X / 390/390X] IOMMU group 15: [1000:0072] 27:00.0 Serial Attached SCSI controller: LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03) IOMMU group 16: [1022:145a] 28:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Device 145a IOMMU group 17: [1022:1456] 28:00.2 Encryption controller: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Platform Security Processor IOMMU group 18: [1022:145c] 28:00.3 USB controller: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) USB 3.0 Host Controller IOMMU group 19: [1022:1455] 29:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Device 1455 IOMMU group 20: [1022:7901] 29:00.2 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 51) IOMMU group 21: [1022:1457] 29:00.3 Audio device: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) HD Audio Controller Edited December 4, 2018 by Squazz Quote Link to comment
DZMM Posted June 6, 2018 Share Posted June 6, 2018 Good to see you got your system built! TV server - check out the unRAID DVB Edition builds and research compatible TV cards pfSense router - will take some reconfiguring of the home network - worth the effort. It's amazing how many things are possible and how much better your network performs Kodi MySQL database - I only have one Kodi machine at the moment, but I have always wanted to set it up with a MySQL database. I would still set this up and setup headless Kodi or a kodi installation on your PC - I do this to do all my library maintenance as well as watch media Find a good music streaming service - for your own media? Give Plex a whirl Find a way to start turned off VMs without going through the unRaid interface - you asked about this before. If it's for you and not the family, check out the WOL plugin. Otherwise I'd just hibernate them 1 Quote Link to comment
DZMM Posted June 7, 2018 Share Posted June 7, 2018 Forgot to add - sort out your wiring! You've got a good case for organising wires Quote Link to comment
Squazz Posted June 7, 2018 Author Share Posted June 7, 2018 20 hours ago, DZMM said: Good to see you got your system built! TV server - check out the unRAID DVB Edition builds and research compatible TV cards pfSense router - will take some reconfiguring of the home network - worth the effort. It's amazing how many things are possible and how much better your network performs Kodi MySQL database - I only have one Kodi machine at the moment, but I have always wanted to set it up with a MySQL database. I would still set this up and setup headless Kodi or a kodi installation on your PC - I do this to do all my library maintenance as well as watch media Find a good music streaming service - for your own media? Give Plex a whirl Find a way to start turned off VMs without going through the unRaid interface - you asked about this before. If it's for you and not the family, check out the WOL plugin. Otherwise I'd just hibernate them Thanks! It was quite some time underway, but I got there at last Thank for the inputs, I'll look more closely at your suggestions 4 hours ago, DZMM said: Forgot to add - sort out your wiring! You've got a good case for organising wires Haha, yeah I know. Wiring is always my nemesis. I will get to it at some point, but right now I just reconfigure the setup on a bi-daily basis Do trust though that I will post an updated picture when I get everything sorted out Quote Link to comment
Jcloud Posted June 16, 2018 Share Posted June 16, 2018 On 6/6/2018 at 11:31 AM, Squazz said: Steam Game files are on a separate share just for this. One thing I've ran into, related to this topic, is that some games don't like the network share system we do with unRAID - especially if it has cheater-protection app on it. For example ARK runs fine, but if you try and use their cheater-protection ARK will go APE-S*&^ bonkers trying to load. The solution here, is the same as for Battle.net, make a vDisk for it, or passthrough an entire drive. Just FYI. Quote Link to comment
Squazz Posted June 16, 2018 Author Share Posted June 16, 2018 9 hours ago, Jcloud said: One thing I've ran into, related to this topic, is that some games don't like the network share system we do with unRAID - especially if it has cheater-protection app on it. For example ARK runs fine, but if you try and use their cheater-protection ARK will go APE-S*&^ bonkers trying to load. The solution here, is the same as for Battle.net, make a vDisk for it, or passthrough an entire drive. Just FYI. That's not something I have experienced yet, but if I run into the issue I now know what the solution could be Thanks for that info Quote Link to comment
Andrewch Posted October 29, 2018 Share Posted October 29, 2018 On 6/7/2018 at 4:31 AM, Squazz said: Find a way to have VMs running in other rooms Hi mate. Great read and build. How'd you go with running VM's in different rooms? I've not come across a solution that suits me yet. Quote Link to comment
Squazz Posted October 29, 2018 Author Share Posted October 29, 2018 1 minute ago, Andrewch said: Hi mate. Great read and build. How'd you go with running VM's in different rooms? I've not come across a solution that suits me yet. Thank you so much! I havn't found a way yet. I havn't really had the time to play around with it (new house and IRL stuff), but the new house just makes this more needed than before. I have been thinking about making terminal-link clients in other rooms. But yeah, no real progress in that area yet. Will do a post about it if I find a way. Also please do feel free to give me a shout if you figure out something awesome Quote Link to comment
Andrewch Posted October 29, 2018 Share Posted October 29, 2018 Yeah will do. I already love how much my server does but for it to serve the whole house with Pc's would be awesome. Im in a similar boat - need time to develop a plan. Cheers 1 Quote Link to comment
DZMM Posted October 29, 2018 Share Posted October 29, 2018 On 6/6/2018 at 7:31 PM, Squazz said: Find a way to have VMs running in other rooms How far away are the rooms located? HDMI over ethernet is a potential solution, as well as long HDMI/USB cables Quote Link to comment
JonathanM Posted October 29, 2018 Share Posted October 29, 2018 32 minutes ago, DZMM said: HDMI over ethernet is a potential solution I use this, as long as you have unused good quality cables with home runs to your server it works awesome. The term "over ethernet" is a little broad, the solutions that actually run through a switch on the existing network are EXPENSIVE. The ones I use require a dedicated CAT5e / CAT6 cable, no connection to your home network. https://www.monoprice.com/product?p_id=8159 Is what I'm currently using, it says CAT6, but high quality carefully terminated CAT5e works just fine in my experience. Quote Link to comment
Andrewch Posted October 29, 2018 Share Posted October 29, 2018 HDMI over Ethernet is definitely a way to do it but in my case (as mentioned) it would be expensive. Especially for something that I don't really need - just really want! 😁 Maybe cheap android boxes using RDP??? I don't have any experience with RDP so can't say if that would be any good. Quote Link to comment
Squazz Posted October 30, 2018 Author Share Posted October 30, 2018 On 10/29/2018 at 1:12 PM, DZMM said: How far away are the rooms located? HDMI over ethernet is a potential solution, as well as long HDMI/USB cables On 10/29/2018 at 1:49 PM, jonathanm said: I use this, as long as you have unused good quality cables with home runs to your server it works awesome. The term "over ethernet" is a little broad, the solutions that actually run through a switch on the existing network are EXPENSIVE. The ones I use require a dedicated CAT5e / CAT6 cable, no connection to your home network. https://www.monoprice.com/product?p_id=8159 Is what I'm currently using, it says CAT6, but high quality carefully terminated CAT5e works just fine in my experience. I'm leaning more towards optical thunderbolt if something like that ends up being the solution. 21 hours ago, Andrewch said: Maybe cheap android boxes using RDP??? I don't have any experience with RDP so can't say if that would be any good. I've been looking into doing something like this. Got a friends who's working with IT for big companies, will have to pump him for details about thin-clients one day. Quote Link to comment
tsawind Posted November 24, 2018 Share Posted November 24, 2018 This sytem looks amazing, I am trying to do the same thing with 2 workstations, but I cant even get one VM working. =-( You make it look so easy! I wish I could find a step by step manual to get this stuff working. 1 Quote Link to comment
Squazz Posted November 24, 2018 Author Share Posted November 24, 2018 (edited) Thanks @tsawind! It both is hard and easy to set up unraid the first time you use it. It sounds like you need to create your own thread about the problems you are facing. I would love to be of assistance in that thread. I guess you already have made such a thread here? https://forums.unraid.net/topic/75834-trouble-with-install/?tab=comments#comment-699373 As the other person mentions there, we need something a little more concrete on what your problem is. I'll write some more on the above mentioned thread Edited November 24, 2018 by Squazz Quote Link to comment
tsawind Posted December 20, 2018 Share Posted December 20, 2018 So I just re-read part of this post, and I think you just explained why I have been having BSODs. They have been: attempt_to_write_to_read_only, memory_management, dxkrnl.sys, netkvm.sys, ect ect ect. I have an overclocked build with a 2700x. I bought 2 8gb sticks of good high end RAM, G.SKILL Trizent Z 3600 CAS 1. I have them running at 3600 mhz, command rate 1, Timing 17-18-18-38, 1.35v. I have noticed during overclocking the speed and timings that these particular sticks don't want to run faster than 3800mhz, and they like extra voltage to improve timings. From an overclocker standpoint they only went unstable with too high of speeds, or if the temps went over 50 degrees C. We were diagnosing the BSOD, doing a dual 4k gaming session and came to a rough conclusion that the problem existed somewhere along the DDR4 Ram. I assumed this was due to heat, as one day it was much hotter in the room and we would have a BSOD every 15-30 minutes, one time the entire system froze solid, even failing to POST. The day before it was much cooler in the room and we had a 5+ hours session of heavy gaming with no crashes. The game we are playing is Elder Scrolls Online through steam. The high resolution and extreme memory usage required me to install the game directly in the isolated sata SSDs, the normal unraid array wasnt fast enough for both VMs. This could be solved with a fast CACHE drive in my array. So I started really digging and FINALLY found this picture: We looked at the problem from a different point of view, and realizes there is a LOT of pressure on Channel A in the memory controller between the 2 sticks of RAM. I had realised this while I was deciding/buying parts for this build, thus why I bought the more expensive, faster, lower latency ram. I try to think of each of those arrows on the picture as a river. In these rivers runs electricity, (Bandwidth), and if the river gets full, it floods. Electricity gets overflows in the form of extra heat, Blue Screens of DEATH, and speed reductions.... lol I know I am crazy, and that is way way overly dumbed down and only partially true. It is relevant though cause we are talking about going back to the basics, this might not be a driver issues or some quirky thing that nobody knows anything about. It might litterally be: "You told the river to flow faster, but it can't flow that fast all the time." My point is I believe the chipset is under heavy stress already: using the entire unraid array, 2 SSDs directly to the VMs, the multiple USB controllers, the network connections, and anything else on the chipset. Now add 2 graphics cards AND 8 powerful cpu cores and make everything go BOTH WAYS in one tiny river in the memory controller. (Channel A) 2 more sticks should help a lot in my opinion. I will keep you guys posted if this fixed my stability issues. I am going to reduce the speed, and check the max voltage allowed to the memory controller for my ryzen cpu.https://en.wikichip.org/wiki/amd/ryzen_7/2700x From what I see here I have "G.SKILL TridentZ Series 16GB (2 x 8GB) 288-Pin DDR4 SDRAM DDR4 3600 (PC4 28800) Intel Z170 / Z270 / Z370 / X299 Desktop Memory Model F4-3600C17D-16GTZ", which appears to be single rank. I should run this ram on this particular build at 1.35+- volts, and DDR4-2133. I believe I should wait to do the major timing "overclock" until I have all 4 DIMMS installed? It takes forever, and the only way I know how to do it is, bare-metal boot, turn down a timing number, stress test, rinse and repeat. Anybody see anything I am missing?? Thank you for this post I think it helped solve a major problem for me! I bought a SanDisk Cruzer Fit CZ33 32GB USB 2.0 Low-Profile Flash Drive- SDCZ33-032G-B35 I am hoping this is a decent stick for my UNRAID. My build: https://pcpartpicker.com/list/tJ39QZ (some misc parts are missing like custom case, a USB controller, USB hubs, extension cables ect.) My next buy is: UNRAID PRO!!! My next upgrades: Adding 16gb of matching ram, UPS, and 1tb M.2 Drive. I believe this should stabilize the entire system and hopefully have no more issues. My wishlist: 1600w corsair PSU, UHD Blue Ray Burner, and a decent supply of MDiscs, 4 more screens, 2-7.1 surround systems, 4 more 8tb harddrives, ROG router. Im sure I could come up with more things to add here 😃 like 2 VRs, gaming chairs, car simulators, flight sims, steam controllers ect ect ect ect Looking for answers to: 1. Is that a proper USB stick? 2. Anything I should test for the community. Thank you and I hope this helps someone, TsA Quote Link to comment
Squazz Posted December 21, 2018 Author Share Posted December 21, 2018 I'm glad that my updates to the post is helping someone, it makes it worth the work! After your kind words, I'll continue updating the post with new info 14 hours ago, tsawind said: So I just re-read part of this post, and I think you just explained why I have been having BSODs. They have been: attempt_to_write_to_read_only, memory_management, dxkrnl.sys, netkvm.sys, ect ect ect. I have an overclocked build with a 2700x. I bought 2 8gb sticks of good high end RAM, G.SKILL Trizent Z 3600 CAS 1. I have them running at 3600 mhz, command rate 1, Timing 17-18-18-38, 1.35v. I have noticed during overclocking the speed and timings that these particular sticks don't want to run faster than 3800mhz, and they like extra voltage to improve timings. From an overclocker standpoint they only went unstable with too high of speeds, or if the temps went over 50 degrees C. ... I am going to reduce the speed, and check the max voltage allowed to the memory controller for my ryzen cpu.https://en.wikichip.org/wiki/amd/ryzen_7/2700x From what I see here I have "G.SKILL TridentZ Series 16GB (2 x 8GB) 288-Pin DDR4 SDRAM DDR4 3600 (PC4 28800) Intel Z170 / Z270 / Z370 / X299 Desktop Memory Model F4-3600C17D-16GTZ", which appears to be single rank. I should run this ram on this particular build at 1.35+- volts, and DDR4-2133. I believe I should wait to do the major timing "overclock" until I have all 4 DIMMS installed? It takes forever, and the only way I know how to do it is, bare-metal boot, turn down a timing number, stress test, rinse and repeat. Anybody see anything I am missing?? After my experience with BSODs and parity errors I'm not overclocking my memory anymore. The gains vs. the risks are not worth it to me. But yes, if you want to do a overclock, you should wait until you have all the sticks. Everything would have to be re-tested and probably reconfigured when you get the last sticks. 14 hours ago, tsawind said: I bought a SanDisk Cruzer Fit CZ33 32GB USB 2.0 Low-Profile Flash Drive- SDCZ33-032G-B35 I am hoping this is a decent stick for my UNRAID. My build: https://pcpartpicker.com/list/tJ39QZ (some misc parts are missing like custom case, a USB controller, USB hubs, extension cables ect.) ... Looking for answers to: 1. Is that a proper USB stick? From what I have understood, all USB sticks are fine. I'm running mine on a stick I got for free at a conference, works just fine even though it's a "slow stick". Quote Link to comment
tsawind Posted December 21, 2018 Share Posted December 21, 2018 Keep in mind I didn't realize that I was overclocking my memory! This is what made my instability so hard to diagnose. Especially with my motherboard on the Asus website showing pictures of 4 sticks of ram running at 3600 mhz!!!! So I bought 3600mhz Ram, thinking I was doing the right thing, but my memory controller wasn't fast enough to keep up, so I was overclocked even though I was running with the recommended XMP profile! The wikichip.org shows the ratings for my integrated memory controller for my 2700x. Also something to note, if I run a bare metal boot-up with windows 10 from an SSD, I am perfectly stable with the overclock. Quote Link to comment
ksignorini Posted December 30, 2018 Share Posted December 30, 2018 How do you find your gaming FPS with Ryzen on unRAID? Quote Link to comment
Squazz Posted December 30, 2018 Author Share Posted December 30, 2018 8 minutes ago, ksignorini said: How do you find your gaming FPS with Ryzen on unRAID? This is something i will have to dig deeper into at some time. Generally I havn't noticed anything alarming. But for some reason it seems CS:GO is capped at 150FPS when I'm playing it on my Win10 VM on Unraid. If I boot up on barebones I get 280+ FPS But this is the only game I have experienced it in (and the only game I play I generate 150+ FPS in) Sorry I can't give a better answer at the time of writing this Quote Link to comment
tjustice86 Posted May 9, 2019 Share Posted May 9, 2019 How are you passing through your audio? I would like to use HDMI passthrough but can't seem to get it to work with my VM. The on board audio controller works but I would like to watch movies and even game at at least 5.1. Any ideas or pointers? MOBO: MSI B450 Gaming Pro Carbon AC CPU: AMD Ryzen 7 1700x GPU: XFX AMD Radeon rx 580 I will have to check my cstates and memory speed when I get home. Quote Link to comment
Squazz Posted May 29, 2019 Author Share Posted May 29, 2019 On 5/9/2019 at 11:09 PM, tjustice86 said: How are you passing through your audio? I would like to use HDMI passthrough but can't seem to get it to work with my VM. The on board audio controller works but I would like to watch movies and even game at at least 5.1. Any ideas or pointers? MOBO: MSI B450 Gaming Pro Carbon AC CPU: AMD Ryzen 7 1700x GPU: XFX AMD Radeon rx 580 I will have to check my cstates and memory speed when I get home. Hi there, I'm SO SORRY for replying so late. Right now, I'm using a USB DAC for my audio. Works like a charm :) When at my computer, I'm only running a pair of headphones, no surround. Quote Link to comment
Josh.5 Posted March 15, 2020 Share Posted March 15, 2020 @Squazz I've got a build with a Ryzen 1700. Seems over the past year it has improved quite a bit with every Unraid update. But I still get these stutters in gameplay. I was wondering if you had experienced this at all with your Windows VM? If not, would you mind sharing your XML for the VM with me so I can compare it? My current hardware: GPU: GTX 1060 (6GB) Motherboard: ASUS PRIME x370 pro RAM: Corsair LPX 32GB DRAM 3000MHz C15 I have my VM running on a dedicated SSD with the whole USB controller passed through to it. I've tried with anywhere from 4-8 logical CPUs passed through (8-15). They don't seem to make a difference. Currently have 8GB RAM configured for the VM. I would like to get this VM running some of my games. Games like PUBG often drop below 20FPS and are pretty much unplayable. LoL is ok and medium settings. I know the 1060 is not the best card on the market, but it and the Ryzen CPU should be able to handle these games way better than it is. Any help would be appreciated. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.