Jump to content

ata3: exception Emask 0x10 SAct 0x0 SErr 0x4050000 action 0xe frozen


wgstarks

Recommended Posts

rc.diskinfo[17266]: PHP Warning: Use of undefined constant ID_MODEL - assumed 'ID_MODEL'

And the million others.  Preclear needs an update to handle this warning.  Its just a warning, no harm no foul.  You can however silence them via Tips & Tweaks plugins and disable Show PHP warnings (which you've previously enabled)

Link to comment

Aren't you getting notifications about the pending and reallocated sectors? It's this one:

 

=== START OF INFORMATION SECTION ===

Model Family:     Hitachi Ultrastar A7K2000
Device Model:     Hitachi HUA722020ALA330
Serial Number:    JK11A8B9JZEJ1F
LU WWN Device Id: 5 000cca 222ea04e2
Firmware Version: JKAOA20N
User Capacity:    2,000,398,934,016 bytes [2.00 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Fri Jun  8 18:24:39 2018 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Disabled
APM feature is:   Disabled
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80)    Offline data collection activity
                    was never started.
                    Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever
                    been run.
Total time to complete Offline
data collection:         (22330) seconds.
Offline data collection
capabilities:              (0x5b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    No Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine
recommended polling time:      (   1) minutes.
Extended self-test routine
recommended polling time:      ( 372) minutes.
SCT capabilities:            (0x003d)    SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     PO-R--   098   098   016    -    65539
  2 Throughput_Performance  P-S---   131   131   054    -    107
  3 Spin_Up_Time            POS---   134   134   024    -    575 (Average 507)
  4 Start_Stop_Count        -O--C-   100   100   000    -    10
  5 Reallocated_Sector_Ct   PO--CK   100   100   005    -    91
  7 Seek_Error_Rate         PO-R--   087   087   067    -    524302
  8 Seek_Time_Performance   P-S---   107   107   020    -    41
  9 Power_On_Hours          -O--C-   100   100   000    -    48
 10 Spin_Retry_Count        PO--C-   100   100   060    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    9
192 Power-Off_Retract_Count -O--CK   100   100   000    -    832
193 Load_Cycle_Count        -O--C-   100   100   000    -    832
194 Temperature_Celsius     -O----   176   176   000    -    34 (Min/Max 18/40)
196 Reallocated_Event_Count -O--CK   082   082   000    -    507
197 Current_Pending_Sector  -O---K   100   100   000    -    2
198 Offline_Uncorrectable   ---R--   100   100   000    -    0
199 UDMA_CRC_Error_Count    -O-R--   200   200   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x03       GPL     R/O      1  Ext. Comprehensive SMART error log
0x04       GPL     R/O      7  Device Statistics log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x20       GPL     R/O      1  Streaming performance log [OBS-8]
0x21       GPL     R/O      1  Write stream error log
0x22       GPL     R/O      1  Read stream error log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
Device Error Count: 4
    CR     = Command Register
    FEATR  = Features Register
    COUNT  = Count (was: Sector Count) Register
    LBA_48 = Upper bytes of LBA High/Mid/Low Registers ]  ATA-8
    LH     = LBA High (was: Cylinder High) Register    ]   LBA
    LM     = LBA Mid (was: Cylinder Low) Register      ] Register
    LL     = LBA Low (was: Sector Number) Register     ]
    DV     = Device (was: Device/Head) Register
    DC     = Device Control Register
    ER     = Error register
    ST     = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 4 [3] occurred at disk power-on lifetime: 48 hours (2 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 07 00 00 00 13 7c b1 00 00  Error: UNC at LBA = 0x00137cb1 = 1277105

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 08 00 08 00 00 00 13 7c b0 40 00 12d+08:44:09.371  READ FPDMA QUEUED
  ef 00 10 00 02 00 00 00 00 00 00 a0 00 12d+08:44:09.369  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 00 00 00 00 00 e0 00 12d+08:44:09.368  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 00 00 00 00 00 a0 00 12d+08:44:09.359  IDENTIFY DEVICE
  ef 00 03 00 46 00 00 00 00 00 00 a0 00 12d+08:44:09.358  SET FEATURES [Set transfer mode]

Error 3 [2] occurred at disk power-on lifetime: 48 hours (2 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 07 00 00 00 13 7c b1 00 00  Error: UNC at LBA = 0x00137cb1 = 1277105

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 08 00 70 00 00 00 13 7c b0 40 00 12d+08:43:52.159  READ FPDMA QUEUED
  60 00 08 00 68 00 00 00 13 7c a8 40 00 12d+08:43:52.116  READ FPDMA QUEUED
  60 00 08 00 60 00 00 00 13 7c a0 40 00 12d+08:43:52.114  READ FPDMA QUEUED
  60 00 08 00 58 00 00 00 13 7c 98 40 00 12d+08:43:52.113  READ FPDMA QUEUED
  60 00 08 00 50 00 00 00 13 7c 90 40 00 12d+08:43:52.112  READ FPDMA QUEUED

Error 2 [1] occurred at disk power-on lifetime: 48 hours (2 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 04 6b 00 00 00 13 84 dd 00 00  Error: UNC at LBA = 0x001384dd = 1279197

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 08 00 d0 00 00 00 13 7a 00 40 00 12d+08:43:32.877  READ FPDMA QUEUED
  60 04 c0 00 40 00 00 00 13 7f 40 40 00 12d+08:43:32.549  READ FPDMA QUEUED
  60 05 48 00 38 00 00 00 13 84 00 40 00 12d+08:43:32.549  READ FPDMA QUEUED
  60 00 b8 00 30 00 00 00 13 89 48 40 00 12d+08:43:32.548  READ FPDMA QUEUED
  60 00 01 00 28 00 00 00 00 00 00 40 00 12d+08:43:32.548  READ FPDMA QUEUED

Error 1 [0] occurred at disk power-on lifetime: 48 hours (2 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 02 8f 00 00 00 13 7c b1 00 00  Error: UNC at LBA = 0x00137cb1 = 1277105

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 04 c0 00 a8 00 00 00 13 7f 40 40 00 12d+08:43:15.061  READ FPDMA QUEUED
  60 05 40 00 a0 00 00 00 13 7a 00 40 00 12d+08:43:15.061  READ FPDMA QUEUED
  60 00 b8 00 98 00 00 00 13 79 48 40 00 12d+08:42:53.249  READ FPDMA QUEUED
  60 05 48 00 90 00 00 00 13 74 00 40 00 12d+08:42:53.248  READ FPDMA QUEUED
  60 04 c0 00 88 00 00 00 13 6f 40 40 00 12d+08:42:53.247  READ FPDMA QUEUED

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%         7         -
# 2  Short offline       Completed without error       00%         1         -
# 3  Short offline       Completed without error       00%     47659         -
# 4  Short offline       Completed without error       00%     47653         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       256 (0x0100)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    34 Celsius
Power Cycle Min/Max Temperature:     34/36 Celsius
Lifetime    Min/Max Temperature:     18/40 Celsius
Under/Over Temperature Limit Count:   0/0

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:      0/60 Celsius
Min/Max Temperature Limit:           -40/70 Celsius
Temperature History Size (Index):    128 (90)

Index    Estimated Time   Temperature Celsius
  91    2018-06-08 16:17    35  ****************
 ...    ..( 10 skipped).    ..  ****************
 102    2018-06-08 16:28    35  ****************
 103    2018-06-08 16:29    34  ***************
 ...    ..( 18 skipped).    ..  ***************
 122    2018-06-08 16:48    34  ***************
 123    2018-06-08 16:49    35  ****************
 ...    ..( 32 skipped).    ..  ****************
  28    2018-06-08 17:22    35  ****************
  29    2018-06-08 17:23    34  ***************
 ...    ..( 19 skipped).    ..  ***************
  49    2018-06-08 17:43    34  ***************
  50    2018-06-08 17:44    33  **************
 ...    ..(  2 skipped).    ..  **************
  53    2018-06-08 17:47    33  **************
  54    2018-06-08 17:48     ?  -
  55    2018-06-08 17:49     ?  -
  56    2018-06-08 17:50    27  ********
  57    2018-06-08 17:51    28  *********
  58    2018-06-08 17:52    29  **********
  59    2018-06-08 17:53    30  ***********
  60    2018-06-08 17:54    30  ***********
  61    2018-06-08 17:55    31  ************
  62    2018-06-08 17:56    32  *************
  63    2018-06-08 17:57    33  **************
  64    2018-06-08 17:58    33  **************
  65    2018-06-08 17:59    34  ***************
  66    2018-06-08 18:00    34  ***************
  67    2018-06-08 18:01    35  ****************
  68    2018-06-08 18:02    36  *****************
  69    2018-06-08 18:03    36  *****************
  70    2018-06-08 18:04    37  ******************
  71    2018-06-08 18:05    37  ******************
  72    2018-06-08 18:06    37  ******************
  73    2018-06-08 18:07    38  *******************
  74    2018-06-08 18:08    38  *******************
  75    2018-06-08 18:09    39  ********************
  76    2018-06-08 18:10    39  ********************
  77    2018-06-08 18:11    40  *********************
  78    2018-06-08 18:12     ?  -
  79    2018-06-08 18:13    36  *****************
  80    2018-06-08 18:14    36  *****************
  81    2018-06-08 18:15    36  *****************
  82    2018-06-08 18:16    35  ****************
 ...    ..(  3 skipped).    ..  ****************
  86    2018-06-08 18:20    35  ****************
  87    2018-06-08 18:21    34  ***************
 ...    ..(  2 skipped).    ..  ***************
  90    2018-06-08 18:24    34  ***************

SCT Error Recovery Control:
           Read: Disabled
          Write: Disabled

Device Statistics (GP Log 0x04)
Page  Offset Size        Value Flags Description
0x01  =====  =               =  ===  == General Statistics (rev 1) ==
0x01  0x008  4               9  ---  Lifetime Power-On Resets
0x01  0x010  4              48  ---  Power-on Hours
0x01  0x018  6      3942678070  ---  Logical Sectors Written
0x01  0x020  6         9071142  ---  Number of Write Commands
0x01  0x028  6      7873862968  ---  Logical Sectors Read
0x01  0x030  6          509564  ---  Number of Read Commands
0x03  =====  =               =  ===  == Rotating Media Statistics (rev 1) ==
0x03  0x008  4              48  ---  Spindle Motor Power-on Hours
0x03  0x010  4              48  ---  Head Flying Hours
0x03  0x018  4             832  ---  Head Load Events
0x03  0x020  4              93  ---  Number of Reallocated Logical Sectors
0x03  0x028  4              14  ---  Read Recovery Attempts
0x03  0x030  4               1  ---  Number of Mechanical Start Failures
0x04  =====  =               =  ===  == General Errors Statistics (rev 1) ==
0x04  0x008  4               4  ---  Number of Reported Uncorrectable Errors
0x04  0x010  4              12  ---  Resets Between Cmd Acceptance and Completion
0x05  =====  =               =  ===  == Temperature Statistics (rev 1) ==
0x05  0x008  1              34  ---  Current Temperature
0x05  0x010  1              34  N--  Average Short Term Temperature
0x05  0x018  1               -  N--  Average Long Term Temperature
0x05  0x020  1              40  ---  Highest Temperature
0x05  0x028  1              18  ---  Lowest Temperature
0x05  0x030  1              35  N--  Highest Average Short Term Temperature
0x05  0x038  1              25  N--  Lowest Average Short Term Temperature
0x05  0x040  1               -  N--  Highest Average Long Term Temperature
0x05  0x048  1               -  N--  Lowest Average Long Term Temperature
0x05  0x050  4               0  ---  Time in Over-Temperature
0x05  0x058  1              60  ---  Specified Maximum Operating Temperature
0x05  0x060  4               0  ---  Time in Under-Temperature
0x05  0x068  1               0  ---  Specified Minimum Operating Temperature
0x06  =====  =               =  ===  == Transport Statistics (rev 1) ==
0x06  0x008  4              83  ---  Number of Hardware Resets
0x06  0x010  4              24  ---  Number of ASR Events
0x06  0x018  4               0  ---  Number of Interface CRC Errors
                                |||_ C monitored condition met
                                ||__ D supports DSN
                                |___ N normalized value

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x0002  2            0  R_ERR response for data FIS
0x0005  2            0  R_ERR response for non-data FIS
0x0009  2            1  Transition from drive PhyRdy to drive PhyNRdy
0x000a  2            1  Device-to-host register FISes sent due to a COMRESET
0x000b  2            0  CRC errors within host-to-device FIS
0x000d  2            0  Non-CRC errors within host-to-device FIS

 

Link to comment

No, but I actually only had it installed for a total of about 10 or 15 minutes. Its a refurbished drive that I just bought and now am RMAing. Not sure how often unRaid sends those alerts or if they do for drives not in the array? It was never formatted or mounted (couldn't). Just wanted to be sure the log entries were for the 2TB Hitachi that I'm replacing already and not some other drive.

Link to comment

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...