Rick Sanchez Posted June 12, 2018 Share Posted June 12, 2018 Hi, I performed a clean shutdown, pulled all of the cables from the back and let the system become fully powered down. - 45-50 minutes to be safe. I pulled the 4TB WD RED Parity Drive (all labelled) from the case (hot-swap) and I inserted my brand new 10TB WD RED Parity Drive until I heard the click. - 100% connected. I plugged all of the cables back in and let UnRAID 6.5.2 boot properly. I am then greeted by this (see screenshot). The drive that I have pulled, is now available for Disk 2 and 5. Does anyone have a clue whats going on and how I can fix it? Thanks ~ RS - I have two 10TB drives to install. Quote Link to comment
JorgeB Posted June 13, 2018 Share Posted June 13, 2018 8 hours ago, Rick Sanchez said: The drive that I have pulled, is now available for Disk 2 and 5. That would suggest you pulled the wrong drive, please post your diagnostics: Tools -> Diagnostics Quote Link to comment
Rick Sanchez Posted June 13, 2018 Author Share Posted June 13, 2018 The model/serial numbers all match. I've definitely pulled the correct drive. diagnostics.zip Quote Link to comment
JorgeB Posted June 14, 2018 Share Posted June 14, 2018 sde is the old parity disk and is still connected. Quote Link to comment
Rick Sanchez Posted June 14, 2018 Author Share Posted June 14, 2018 It definitely isn't, it is on my desk lol Quote Link to comment
JorgeB Posted June 14, 2018 Share Posted June 14, 2018 It is on the diags you posted: [name] => parity ... [idSb] => WDC_WD40EFRX-68WT0N0_WD-WCC4E1548015 === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD40EFRX-68WT0N0 Serial Number: WD-WCC4E1548015 LU WWN Device Id: 5 0014ee 25f689222 Firmware Version: 80.00A80 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Jun 13 15:46:33 2018 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.