joe_sun Posted June 19, 2018 Share Posted June 19, 2018 I was expanding my drive, replaced the old 3tb Parity drive with an 8tb drive and that went fine Replaced an old 1.5tb drive with the old 3tb parity drive and that went fine Replaced the last old 1.5tb drive with a new 8tb drive. I woke up this morning to the red X on the old 3tb drive. I wasn't able to get a SMART report in the log but pulled one from the drive and attached it. Thanks! tower-diagnostics-20180619-0810.zip tower-smart-20180619-0815.zip Link to comment
JorgeB Posted June 19, 2018 Share Posted June 19, 2018 Problem seems to be the Marvell controller, there are ATA errors on all 4 disks connected there, Marvell controllers are not recommended for unRAID and should be avoided. Link to comment
joe_sun Posted June 19, 2018 Author Share Posted June 19, 2018 Thank you, looks as if I'm doing the H310 upgraded sooner, as in right now, than later. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.