sonofdbn Posted June 24, 2018 Share Posted June 24, 2018 (edited) While I was away there was a power glitch and fortunately the UPS shutdown the array gracefully. But on rebooting, I got CRC errors and disk read errors on one of my data disks. From reading around, it seems that CRC errors are possibly not too serious. However, disk read errors might be an issue. My diagostics: tower-diagnostics-20180624-2153.zip Should I replace the drive? If it's recommended that I replace the disk, which is 4TB, can I just swap in an 8TB drive and rebuild? Edited June 25, 2018 by sonofdbn Quote Link to comment
JorgeB Posted June 25, 2018 Share Posted June 25, 2018 SMART looks OK, run an extended SMART test on that disk, if OK swap/replace cables and monitor. Quote Link to comment
sonofdbn Posted June 25, 2018 Author Share Posted June 25, 2018 Thanks so much for the help. Ran an extended SMART test and the disk passed. So I shutdown, changed the cable and restarted. Now I get a nice notification telling me that "array turned good. Array has 0 disks with read errors." Quote Link to comment
JorgeB Posted June 25, 2018 Share Posted June 25, 2018 That will rule out the cable, so keep monitoring. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.