June 30, 20188 yr i can't get passed this screen. i already tried re flash usb many times. Gui mode or no Gui mode still this freeze screen. long story short. i just change my server hardware from Ryzen to Intel. i thought it's going to be easy but it's not :(. my new spec is i7 8086K. mainboardbis Asrock Z370 updated to latest Bios. Already disable C State. My mainboard has no usb 2.0 so I can't test and i tried changing usb to legacy mode. need help. thanks in advance. (sorry for my english)
June 30, 20188 yr Did you run a 24 hour memtst? Rename your go file (in the config folder/directory) and use the stock go file from a recent distribution. Edited June 30, 20188 yr by Frank1940
June 30, 20188 yr Author i do. usb boot, c state enable and disable. any suggestions? and i already tried new usb flash drive results is the same. my spec i7 8086k asrock z370 gaming itx (latest bios) ram adata 8*2 Edited June 30, 20188 yr by brutalmethods
June 30, 20188 yr You changed motherboard, processor and RAM? Anything else?Sent from my iPhone using Tapatalk
June 30, 20188 yr Author just cpu, mainboard my ram is the same but it's capable of both 2666/3200 hz
June 30, 20188 yr 99% of the time, you have a hardware problem. You can determine if you are in the 1% (that don't have hardware issues) by installing unRAID from a distribution download on another flash drive and see if boots up in the trial mode. If it does boot, you do not have a hardware issue. Edited June 30, 20188 yr by Frank1940
June 30, 20188 yr Author just bought another sandisk flash drive. the result is same. but i might be 1%like you said. *sadface*
June 30, 20188 yr There are other OS environments that boot from USB. Google to find them. You could try one to see if it works.Did you build out of the case first and boot to make sure your system works?Sent from my iPhone using Tapatalk
June 30, 20188 yr Author I'm straight to unraid not test on normal OS (like windows 10) but i think i might try to install on my NVME that i used for cache disk.
June 30, 20188 yr Double check that the RAM modules are properly seated. Also check the the heat sink attachment screws/devices are properly locked down. You already have a second OS system on your unRAID flash Drive. It called 'Memtest' and you access it from the boot menu. See if that boots and runs for couple of hours at the very minimum.
June 30, 20188 yr Author I'm just guessing that the last line that stuck is about CMOS setting system time. maybe cmos battery on mainboard cause the problem? . I'm just guessing anyway and it's not total freeze. next line it's shown blinking underscore but nothing go from there. no matter how long i wait. I'm desperate now.
June 30, 20188 yr Tell us everything that you have done to isolate this problem. Which of the suggestions have you tried and what were the result of each one.
Archived
This topic is now archived and is closed to further replies.