Tom899 Posted July 9, 2018 Share Posted July 9, 2018 (edited) I purchased a WD - easystore® 8TB External, and shucked the drive for my UnRaid server. It happened to be a white drive (WD80EMAZ) so I had to cover pin-3 with Kapton tape, no problem works great. I read a lot in these forums about the beta PreClear plugin might not be compatible so I didn't do PreClear (I shouldn't be in such a rush!). I have the latest PreClear version now, but too late... Anyway, Since I was replacing a drive I did a Parity-Check/Rebuild, all turned out well. I then did an Extended SMART test, it finished with no errors. I wish I would of done a PreClear for peace of mind, now I just hope for the best. Edited July 9, 2018 by Tom899 Quote Link to comment
JonathanM Posted July 9, 2018 Share Posted July 9, 2018 2 hours ago, Tom899 said: Anyway, Since I was replacing a drive I did a Parity-Check/Rebuild, all turned out well. I then did an Extended SMART test, it finished with no errors. I wish I would of done a PreClear for peace of mind, now I just hope for the best. The process of rebuilding will write to the entire surface, and the extended smart test validates that reading the entire surface is ok, so I wouldn't sweat it. Keep an eye on the smart attributes and do a parity check, as long as you get zero errors you are golden. Quote Link to comment
Tom899 Posted July 9, 2018 Author Share Posted July 9, 2018 56 minutes ago, jonathanm said: The process of rebuilding will write to the entire surface, and the extended smart test validates that reading the entire surface is ok, so I wouldn't sweat it. Keep an eye on the smart attributes and do a parity check, as long as you get zero errors you are golden. Great! Thank you!! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.