johnnyfive Posted July 9, 2018 Share Posted July 9, 2018 (edited) Issue: I'm looking to buy and shuck some 8tb drives to add to my current system. I currently have 1x4tb (parity),1x4tb and 2x2tb. I bought a 500gb SSD too and am trying to figure out how to install it as a cache drive in a preset up system.... Do I have to manually go to each folder I guess to enable cache (if needed) and re-setup my dockers? Steps for this I assume is: 1. plug it in and preclear (do I need to do this?) 2. set as cache drive 3. configure folders to use cache 4. configure dockers to use cache drive. I haven't bought the 8tb drives yet, but from what I've read in the bunch of threads is that I should test them extensively before shucking and then preclear them... Then I have read that preclear is not necessary anymore... So I'm not sure what information is correct. And if preclear is necessary, I couldn't find it while I was setting up my Unraid a couple months back. Process from what I found is 1. Do extensive tests on drives (what tools would be good for this?) 2. Shuck drives and preclear (or can i preclear during the 'extensive test phase') 3. Plug in New Hard Drive and set it as a parity drive. Let the parity complete. 4. Take 4tb parity drive off parity and format it as another drive. 5. Plug in 2nd 8tb Drive and format it into the unraid system. I think thats all the steps... Thanks in Advance. Edit: Also.... if I have a cache drive... Do I need turbo write on (I currently have it on)... Maybe I should turn it off as all files are transferred already... Edited July 9, 2018 by johnnyfive Quote Link to comment
wgstarks Posted July 27, 2018 Share Posted July 27, 2018 (edited) On 7/9/2018 at 6:47 PM, johnnyfive said: Process from what I found is 1. Do extensive tests on drives (what tools would be good for this?) 2. Shuck drives and preclear (or can i preclear during the 'extensive test phase') 3. Plug in New Hard Drive and set it as a parity drive. Let the parity complete. 4. Take 4tb parity drive off parity and format it as another drive. 5. Plug in 2nd 8tb Drive and format it into the unraid system. This looks to be accurate. Testing new HD’s is recommended (before you shuck them). Whether you use preclear for this is up to you. It isn’t required to run preclear on new drives anymore but many people still use it to stress test new drives. Before you decide to use it you should be aware that neither the plugin nor the script is currently being supported by their authors and the plugin at least has caused problems for some people. Mainly when attempting to preclear multiple drives simultaneously. Edited July 27, 2018 by wgstarks Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.