pegounet Posted July 31, 2018 Share Posted July 31, 2018 Hi all, I am running firmware version 6.4.0 and I have a drive checked with a red x . I had just powered the unit on after a move, so I checked and it looks like the drive in question had become unsecured. I secured it and made sure it was plugged in. I have since completed a SMART report and it passed. I've attached the smart report and diagnostics below. i also passed an extended smart self-test in device page and it completed without error. Based on the Smart report, am I safe to rebuild the drive? tower-diagnostics-20180731-2218.zip Quote Link to comment
JorgeB Posted August 4, 2018 Share Posted August 4, 2018 On 7/31/2018 at 10:43 PM, pegounet said: Based on the Smart report, am I safe to rebuild the drive? Yes, as long as there weren't any new writes to the emulated disk, that disk is showing some UDMA CRC errors so you should replace the SATA cable, after re-enabling the disk you should do a parity check. Quote Link to comment
trurl Posted August 4, 2018 Share Posted August 4, 2018 1 hour ago, johnnie.black said: Yes, as long as there weren't any new writes to the emulated disk Not entirely clear what you meant here. Even if there were emulated writes they will be rebuilt too. Quote Link to comment
JorgeB Posted August 4, 2018 Share Posted August 4, 2018 3 minutes ago, trurl said: Not entirely clear what you meant here. Even if there were emulated writes they will be rebuilt too. Right, I was responding to the thread title where I understood the OP wanted to re-enable the disk without rebuilding, for a rebuild there are no such concerns. Quote Link to comment
pegounet Posted August 4, 2018 Author Share Posted August 4, 2018 thk u guys i have changed sata cable and provided partiy check works like a charm Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.