efthernet Posted August 8, 2018 Share Posted August 8, 2018 I'm having an issues were sas2flash commands are not being recognized on bios shell. I install freedos using rufus to a couple usb drives but they all got the same message. I reset my mb bios setting to factory and can see the bios load for card with following error I can access the cards utility but any change i make freezes utility not letting save anything so Im not sure if it has the correct firmware. I'm using the following firmware attached seems to be latest, when I boot onto unraid the card loads and can see drives but drops off after 5 minutes giving the following error: Aug 5 14:29:18 VRAID kernel: mpt2sas_cm1: SAS host is non-operational !!!! ... Aug 5 14:29:24 VRAID kernel: mpt2sas_cm0: sending diag reset !! Aug 5 14:29:25 VRAID kernel: mpt2sas_cm0: diag reset: FAILED sasbios_rel/mptsas2.rom Firmware/HBA_9206_16e_IT/9206.bin sas2flsh_dos_rel/sas2flsh.exe Also added efi/boot/bootx64 sas2flsh -o -e 6 sas2flsh -o -f 9206it.bin -b mptsas2.rom Thanks in advance! 9206-16e_Package_P20_IT_FW_BIOS_for_MSDOS_Windows.zip Quote Link to comment
ghiglie Posted August 8, 2018 Share Posted August 8, 2018 You are missing you have a "SAS Address NOT programmed on controller..." . Have you got it noted somewhere? Quote Link to comment
efthernet Posted August 9, 2018 Author Share Posted August 9, 2018 (edited) 19 hours ago, ghiglie said: You are missing you have a "SAS Address NOT programmed on controller..." . Have you got it noted somewhere? No I don't, is there a way to recover it or reset it so I can start from scratch. I saw this online not sure if it would apply in my case? Also, I did I use the correct firmware and bios? https://forums.freenas.org/index.php?threads/ibm-serveraid-m1015-and-no-lsi-sas-adapters-found.27445/ Edited August 9, 2018 by efthernet Quote Link to comment
ghiglie Posted August 9, 2018 Share Posted August 9, 2018 (edited) There should be a sticker on the card, with a "500605B". Anyway, with some Google-fu: sas2flash -o -sasaddr 500605BXXXXXXXXXX randomize the Xs Edited August 9, 2018 by ghiglie Quote Link to comment
efthernet Posted August 10, 2018 Author Share Posted August 10, 2018 15 hours ago, ghiglie said: There should be a sticker on the card, with a "500605B". Anyway, with some Google-fu: sas2flash -o -sasaddr 500605BXXXXXXXXXX randomize the Xs I keep getting the error 'sas2flash' is not redognized as an inter/external comand, operable program ... I used rufus to install DOS on a usb the added the sas2flash from the firmware from but I guess Im missing something? I need to improve my google-fu skills ... 9206-16e_Package_P20_IT_FW_BIOS_for_MSDOS_Windows.zip Quote Link to comment
ghiglie Posted August 10, 2018 Share Posted August 10, 2018 Sorry, bad copy/paste: it's sas2flsh , non sas2flash Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.