August 14, 20187 yr Hey Guys! First post and new to UnRAID. I recently moved all of my hardware from one case to another and in the process, i did not note down what sata ports were used for what drives so they may have become a little jumbled. In the process, i had to clear my CMOS and re-seat my memory as well as it would not boot. (common for my memory and board combo for some reason) Anyway, prior to that, all my shares were visible and now they are failing to show in the web GUI and in addition to that, the settings icon for Global shares is missing. I can still go into the section and edit the fields but the icon is gone. I've provided all screens, diagnostics and reports below. Things I've tried: Rebooting Re-seating my RAM again Downsizing my RAM from 12GB to 8GB Enabling disk shares away from "auto" to "yes" Looking at threads on the limetech forums. Running a parity check I hope i can have this issue resolved as i have some shares set to private and i don't seem to be able to access those shares while this issue is present, and i can't edit the properties either so they are infinity locked for now. I will add that my shares ARE appearing on the dashboard. However clicking on them takes me to a blank page for anything even related to a share. zelda-diagnostics-20180814-1623.zip
August 14, 20187 yr Author So it turned out to be a caching issue with my machine! Getting chrome to clear the cache properly however is another story. I've had to reinstall it as a result.
August 14, 20187 yr Author 29 minutes ago, trurl said: If you have an adblocker whitelist your server. I do have ad blockers but they are white listed. I Cleared my cache and this didn't resolve the issue, incognito mode showed the shares so i had to reinstall chrome
November 4, 20187 yr I had the same Problem, in incognito mode it still shows me my Shares, but in normal mode nothing will Show up. I have the Adblock Plus Plugin installed, so i whitelisted my Server and... Everything is fine! Thanks @trurl for the tip. Edited November 8, 20187 yr by System21 wrong user
November 4, 20187 yr Community Expert 10 minutes ago, System21 said: Thanks @Constructor for the tip. No Problemo, @Newbie. (I know your name isn't Newbie, but neither is mine Constructor.
Archived
This topic is now archived and is closed to further replies.