Is my drive failing?

[tcwatson]

Hi, yesterday I got a yellow warning over my third disk (the most recent addition) citing it had Read errors. After some searching on these forums, I tried stopping the array and starting in maintenance mode so I could do Smart file system checks, which returned with no errors. I tried to rebuild the disk by stopping the array, selecting No Device for DIsk 3, starting the array, stopping again, and reassigning the drive to the Disk 3 slot. It aborted the rebuild (I think) after a few minutes. I looked through my syslogs and find that it has some write errors. 

 

Is this drive bad? I did order it off ebay and have only had it about 2 weeks. 8tb drive total and had written about 1.2tb to it. 

 

If it is bad - what precautions do I need to take with my array until I can order a new drive?

 

Thanks

tower-diagnostics-20180819-0701.zip

 

Edit - forgot to mention I also did a full read check. Took about 17 hours and found no errors. 

Edited August 19, 2018 by tcwatson

[JorgeB]

SMART looks fine, I would first replace or swap cables an try to rebuild again, to rule them out, if it fails again it's likely the disk.