August 22, 20187 yr First time login for a new unraid system. I cannot login from another computer on the network through a browser using http://Tower or http://192.168.9.44? I can logon to the system directly using the GUI. My Windows 10 ipconfig: IPv4 192.168.9.38 Subnet Mask 255.255.252.0 <--What subnet is unraid using? Tower 192.168.9.44/22 I entered static ip in /boot/config/network.cfg USE_DHCP=no IPADDR=192.168.9.44 NETMASK=255.255.252.0 GATEWAY=192.168.8.1 Edited August 22, 20187 yr by OriginalFlavor Changed 192.168.8.1 to 192.168.9.44
August 22, 20187 yr I may have misunderstood your question but if your server's address is 192.168.9.4 then why do you expect to be able to reach it at http://192.168.8.1 ? Isn't that the address of your router, since that's what you specified as the gateway in your unRAID server's configuration? I suspect that you're getting confused by using a netmask that isn't byte aligned. This calculator might help. Valid addresses for your network range from 192.168.8.1 to 192.168.11.254.
August 22, 20187 yr Author 3 hours ago, John_M said: I may have misunderstood your question but if your server's address is 192.168.9.4 then why do you expect to be able to reach it at http://192.168.8.1 ? Isn't that the address of your router, since that's what you specified as the gateway in your unRAID server's configuration? I suspect that you're getting confused by using a netmask that isn't byte aligned. This calculator might help. Valid addresses for your network range from 192.168.8.1 to 192.168.11.254. My original post had a typo in the first line. The server's address is 192.168.9.44, and not 192.168.8.1.
August 22, 20187 yr Author 3 hours ago, John_M said: I may have misunderstood your question but if your server's address is 192.168.9.4 then why do you expect to be able to reach it at http://192.168.8.1 ? Isn't that the address of your router, since that's what you specified as the gateway in your unRAID server's configuration? I suspect that you're getting confused by using a netmask that isn't byte aligned. This calculator might help. Valid addresses for your network range from 192.168.8.1 to 192.168.11.254. using your tool. The server IP looks okay... Address: 192.168.9.44 11000000.10101000.000010 01.00101100 Netmask: 255.255.252.0 = 22 11111111.11111111.111111 00.00000000 Wildcard: 0.0.3.255 00000000.00000000.000000 11.11111111 Network: 192.168.8.0/22 11000000.10101000.000010 00.00000000 (Class C) Broadcast: 192.168.11.255 11000000.10101000.000010 11.11111111 HostMin: 192.168.8.1 11000000.10101000.000010 00.00000001 HostMax: 192.168.11.254 11000000.10101000.000010 11.11111110 Hosts/Net: 1022 (Private Internet) => Edited August 22, 20187 yr by OriginalFlavor pasted text was not visible after saving
August 22, 20187 yr So, is your problem fixed now? If not, can you ping your server? Post your diagnostics zip. That's Tools -> Diagnostics if you can use the GUI or diagnostics at the command prompt. In the latter case look in the logs folder on your boot flash for the zip file.
Archived
This topic is now archived and is closed to further replies.